A properly functioning ABS system is the foundation of road safety. Its main task is to prevent wheel lock-up during emergency braking, which allows the driver to maintain full control of the vehicle. The heart of this system is the electronic ABS pump controller. When it fails, the system stops working. A proper diagnosis of the problem allows you to avoid unnecessary costs and quickly restore brake efficiency.
ECU ENGINE CONTROLLER MERCEDES BENZ 0281011924 A6461502279 CR3.13
Vendors's code:
Product code: D70C-5726A
Barcode:
Code 39:
ISBN:
€487.80
Price
€487.80
Regular price:
€487.80
0%
€600.00
Price
€600.00
Regular price:
€600.00
0%
Select a product option:
Individual variants may differ in price
product option
Important: Depending on the ECU type and vehicle model, not all of the options listed below may be available.
To select the correct option for your vehicle and ECU, please contact us before purchasing:
contact@auto24parts.com
1. Locked
This option is intended for professional workshops with the required specialist equipment and technical knowledge.
The ECU has been removed from a vehicle intended for recycling and still contains the immobilizer data and other information from the previous vehicle. Before it can be used in another car, it must be unlocked and then programmed using specialist automotive diagnostic equipment.
2. Unlocked
Several preparation methods may be available. The possible options depend on the ECU type, vehicle model and immobilizer system. Please contact us before purchasing, as some preparation methods are not available for every ECU.
Our electronics specialists can prepare the ECU in one of the following ways:
a) ECU with PIN code (Car Pass)
The PIN code is supplied, but programming with a suitable diagnostic tool is still required. After installing the ECU, it must be reset using the supplied PIN code and then programmed to the vehicle’s immobilizer system.
b) VIRGIN ECU
The data from the previous vehicle is removed and the ECU is restored to a clean, factory-like state. After installation, it must be programmed to the vehicle using a compatible specialist diagnostic tool. Unless another preparation method is specified in the product description, this is the standard unlocking option for most of our ECUs.
c) Plug & Play – IMMO OFF
The immobilizer function is disabled in the ECU. After installation, the engine can start without additional immobilizer programming. Please note that the vehicle will no longer have an active immobilizer function, and an immobilizer warning light or fault code may remain, depending on the vehicle model.
d) Plug & Play – Automatic Programming
After installation, the ECU automatically learns and saves the required vehicle data. No additional programming is normally required.
e) Plug & Play – 1:1 Clone
The data from your original ECU is copied to another fully functional ECU. The cloned unit is then ready for installation without additional programming.
You must send us your original ECU so that we can transfer its data to the replacement unit.
The original ECU must have working communication with the vehicle, a diagnostic tool or our programming equipment. If the required data cannot be read, a complete 1:1 clone may not be possible.
3. Complete Plug & Play Set
A complete matched set containing the ECU, immobilizer components and all other parts required to start the vehicle without additional programming. All components supplied in the set must be installed in the vehicle.
Important:
Dispatch time depends on the selected option. If an unlocked or specially prepared version is ordered, the preparation service usually requires an additional 1–2 business days.
Ask about the product
ECU ENGINE CONTROLLER MERCEDES BENZ 0281011924 A6461502279 CR3.13
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
€30.00
-
shipping
(Poland)
from
€30.00
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
0281011924 A6461502279 – ECU ENGINE CONTROLLER Mercedes-Benz CR3.13
ECU ENGINE CONTROLLER with part numbers 0281011924 / A6461502279 in CR3.13 version, used in Mercedes-Benz diesel vehicles to ensure correct engine management.
What is the ECU ENGINE CONTROLLER Mercedes-Benz 0281011924 A6461502279?
The ECU ENGINE CONTROLLER Mercedes-Benz 0281011924 A6461502279 is a key component responsible for proper engine operation, ensuring smooth driving, optimal fuel consumption, and stable engine performance.
What are the symptoms of a faulty CR3.13 engine controller?
Common symptoms include difficulty starting the vehicle, uneven engine operation, the engine warning light turning on, or sudden loss of power while driving.
Does the engine controller 0281011924 fit my Mercedes-Benz?
The engine controller 0281011924 A6461502279 is used in selected Mercedes-Benz models. The best way to confirm compatibility is to compare the part numbers with the original unit installed in your vehicle.
Why is it worth replacing the engine controller with a verified unit?
A properly functioning engine controller restores correct vehicle operation, improves driving comfort, and helps prevent further issues that could lead to costly repairs.
Does replacing the engine controller affect daily vehicle use?
After correct replacement of the Mercedes-Benz engine controller, the vehicle regains full functionality, allowing for safe and trouble-free everyday driving.
