A properly functioning ABS system is the foundation of road safety. Its main task is to prevent wheel lock-up during emergency braking, which allows the driver to maintain full control of the vehicle. The heart of this system is the electronic ABS pump controller. When it fails, the system stops working. A proper diagnosis of the problem allows you to avoid unnecessary costs and quickly restore brake efficiency.
ECU Engine Controller NISSAN MICRA 1.0 MEC32-020 XR G33929 MEC32020G33911
Vendors's code: MEC32-020 XR
Product code: 86CD-117A5
Barcode:
Code 39:
ISBN:
€73.17
Price
€73.17
Regular price:
€73.17
0%
€90.00
Price
€90.00
Regular price:
€90.00
0%
In stock
Select a product option:
Individual variants may differ in price
product option
Important: Depending on the ECU type and vehicle model, not all of the options listed below may be available.
To select the correct option for your vehicle and ECU, please contact us before purchasing:
contact@auto24parts.com
1. Locked
This option is intended for professional workshops with the required specialist equipment and technical knowledge.
The ECU has been removed from a vehicle intended for recycling and still contains the immobilizer data and other information from the previous vehicle. Before it can be used in another car, it must be unlocked and then programmed using specialist automotive diagnostic equipment.
2. Unlocked
Several preparation methods may be available. The possible options depend on the ECU type, vehicle model and immobilizer system. Please contact us before purchasing, as some preparation methods are not available for every ECU.
Our electronics specialists can prepare the ECU in one of the following ways:
a) ECU with PIN code (Car Pass)
The PIN code is supplied, but programming with a suitable diagnostic tool is still required. After installing the ECU, it must be reset using the supplied PIN code and then programmed to the vehicle’s immobilizer system.
b) VIRGIN ECU
The data from the previous vehicle is removed and the ECU is restored to a clean, factory-like state. After installation, it must be programmed to the vehicle using a compatible specialist diagnostic tool. Unless another preparation method is specified in the product description, this is the standard unlocking option for most of our ECUs.
c) Plug & Play – IMMO OFF
The immobilizer function is disabled in the ECU. After installation, the engine can start without additional immobilizer programming. Please note that the vehicle will no longer have an active immobilizer function, and an immobilizer warning light or fault code may remain, depending on the vehicle model.
d) Plug & Play – Automatic Programming
After installation, the ECU automatically learns and saves the required vehicle data. No additional programming is normally required.
e) Plug & Play – 1:1 Clone
The data from your original ECU is copied to another fully functional ECU. The cloned unit is then ready for installation without additional programming.
You must send us your original ECU so that we can transfer its data to the replacement unit.
The original ECU must have working communication with the vehicle, a diagnostic tool or our programming equipment. If the required data cannot be read, a complete 1:1 clone may not be possible.
3. Complete Plug & Play Set
A complete matched set containing the ECU, immobilizer components and all other parts required to start the vehicle without additional programming. All components supplied in the set must be installed in the vehicle.
Important:
Dispatch time depends on the selected option. If an unlocked or specially prepared version is ordered, the preparation service usually requires an additional 1–2 business days.
Ask about the product
ECU Engine Controller NISSAN MICRA 1.0 MEC32-020 XR G33929 MEC32020G33911
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
€30.00
-
shipping
(Poland)
from
€30.00
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Engine control unit Ecu engine controller Nissan Micra 1.0 MEC32-020 MEC32020
Ecu engine controller MEC32-020 (also known as MEC32020, G39311, G33929 or MEC32020G33911) is a matched part for Nissan Micra 1.0 that ensures smooth and stable engine operation during everyday driving, available in a locked or unlocked version – before purchase, it is worth reviewing the description of the variants.
What is the Ecu engine controller MEC32-020 in the Nissan Micra 1.0?
The Ecu engine controller MEC32-020 is a component, that is responsible for correct engine operation of the 1.0 engine in the Nissan Micra. It controls engine operation during vehicle start-up and during everyday driving, ensuring smoothness and stability.
What role does the Ecu engine controller MEC32020 play?
The Ecu engine controller MEC32020 manages the operation of the power unit based on signals collected from the vehicle. Thanks to it, the engine responds correctly to the accelerator and runs evenly in various road conditions.
Do the numbers MEC32-020 XR, G39311 and G33929 refer to the same controller?
Yes, the designations MEC32-020 XR, G39311 and G33929 refer to the same Ecu engine controller. Different numbers result from manufacturer or market markings, while the application remains the same.
Which Nissan Micra versions does the Ecu engine controller MEC32020G33911 fit?
The Ecu engine controller MEC32020G33911 is used in selected Nissan Micra versions with the 1.0 engine. If this number is found on your controller, it means correct matching of the part to the vehicle.
Is the Ecu engine controller MEC32-020 available in different variants?
Yes, the Ecu engine controller MEC32-020 is available in two variants: locked and unlocked. Before choosing the appropriate version, it is worth reading the variant descriptions, to match the controller to a specific vehicle.
When is it worth replacing the Ecu engine controller G39311?
Replacing the Ecu engine controller G39311 is a good solution, when problems with starting the vehicle occur, uneven engine operation or incorrect electronics behavior. A functional controller restores driving comfort and confidence.
Why is the Ecu engine controller number MEC32020G33911 so important?
The number MEC32020G33911 allows precise matching of the Ecu engine controller to the appropriate Nissan Micra 1.0 version. Part number compatibility is the key to proper operation and trouble-free installation.
