A properly functioning ABS system is the foundation of road safety. Its main task is to prevent wheel lock-up during emergency braking, which allows the driver to maintain full control of the vehicle. The heart of this system is the electronic ABS pump controller. When it fails, the system stops working. A proper diagnosis of the problem allows you to avoid unnecessary costs and quickly restore brake efficiency.
ECU Engine controller OPEL ASTRA G 1.7 CDTI Z17DTL 24467018LN BOSCH 0281010859 ISUZU 8973068765
Vendors's code: 24467020
Product code: 24467018LN
Barcode:
Code 39:
ISBN:
€81.30
Price
€81.30
Regular price:
€81.30
0%
€100.00
Price
€100.00
Regular price:
€100.00
0%
Select a product option:
Individual variants may differ in price
product option
Important: Depending on the ECU type and vehicle model, not all of the options listed below may be available.
To select the correct option for your vehicle and ECU, please contact us before purchasing:
contact@auto24parts.com
1. Locked
This option is intended for professional workshops with the required specialist equipment and technical knowledge.
The ECU has been removed from a vehicle intended for recycling and still contains the immobilizer data and other information from the previous vehicle. Before it can be used in another car, it must be unlocked and then programmed using specialist automotive diagnostic equipment.
2. Unlocked
Several preparation methods may be available. The possible options depend on the ECU type, vehicle model and immobilizer system. Please contact us before purchasing, as some preparation methods are not available for every ECU.
Our electronics specialists can prepare the ECU in one of the following ways:
a) ECU with PIN code (Car Pass)
The PIN code is supplied, but programming with a suitable diagnostic tool is still required. After installing the ECU, it must be reset using the supplied PIN code and then programmed to the vehicle’s immobilizer system.
b) VIRGIN ECU
The data from the previous vehicle is removed and the ECU is restored to a clean, factory-like state. After installation, it must be programmed to the vehicle using a compatible specialist diagnostic tool. Unless another preparation method is specified in the product description, this is the standard unlocking option for most of our ECUs.
c) Plug & Play – IMMO OFF
The immobilizer function is disabled in the ECU. After installation, the engine can start without additional immobilizer programming. Please note that the vehicle will no longer have an active immobilizer function, and an immobilizer warning light or fault code may remain, depending on the vehicle model.
d) Plug & Play – Automatic Programming
After installation, the ECU automatically learns and saves the required vehicle data. No additional programming is normally required.
e) Plug & Play – 1:1 Clone
The data from your original ECU is copied to another fully functional ECU. The cloned unit is then ready for installation without additional programming.
You must send us your original ECU so that we can transfer its data to the replacement unit.
The original ECU must have working communication with the vehicle, a diagnostic tool or our programming equipment. If the required data cannot be read, a complete 1:1 clone may not be possible.
3. Complete Plug & Play Set
A complete matched set containing the ECU, immobilizer components and all other parts required to start the vehicle without additional programming. All components supplied in the set must be installed in the vehicle.
Important:
Dispatch time depends on the selected option. If an unlocked or specially prepared version is ordered, the preparation service usually requires an additional 1–2 business days.
Ask about the product
ECU Engine controller OPEL ASTRA G 1.7 CDTI Z17DTL 24467018LN BOSCH 0281010859 ISUZU 8973068765
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
€30.00
-
shipping
(Poland)
from
€30.00
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
ECU Engine controller OPEL ASTRA G 1.7 CDTI Z17DTL 24467018LN BOSCH 0281010859 ISUZU 8973068765
Tested ECU engine controller for Opel Astra G 1.7 CDTI Z17DTL with part numbers 24467018LN and 0281010859, with warranty and fast shipping.
ECU Engine controller OPEL ASTRA G 1.7 CDTI Z17DTL 24467018LN BOSCH 0281010859 ISUZU 8973068765
Which Opel Astra G models are compatible with the Z17DTL 24467018LN ECU controller?
The ECU Engine controller OPEL ASTRA G 1.7 CDTI Z17DTL 24467018LN is a Bosch module produced under number 0281010859, used in Opel Astra G models fitted with the 1.7 CDTI turbodiesel with engine code Z17DTL manufactured by Isuzu. The Opel/GM numbers 24467018LN and 24467020, as well as reference 6235212, all refer to the same control module.
The Isuzu number 8973068765 is an additional reference used in technical documentation for the Z17DTL engine, confirming the widespread use of the Bosch 0281010859 ECU in Astra G models with the 1.7 CDTI engine.
What is the difference between numbers 24467018LN, 24467020, 6235212 and 0281010859 for this ECU?
All these numbers refer to the same physical ECU module. Numbers 24467018LN and 24467020 are Opel/GM references used when ordering parts through dealerships. The number 6235212 is a further GM cross-reference, while 0281010859 is the Bosch catalogue number as the electronics manufacturer.
The Isuzu number 8973068765 comes from the Z17DTL engine manufacturer's documentation. Knowing all these references makes it easier to identify the correct ECU module for Opel Astra G 1.7 CDTI regardless of the search source.
What symptoms can a faulty Bosch 0281010859 controller cause in Opel Astra G 1.7 CDTI?
A defective ECU module 24467018LN in the Opel Astra G with Z17DTL engine may manifest as diesel start problems, excessive exhaust smoke, loss of power during acceleration, or OBD diagnostic errors related to the injection system.
Every Bosch 0281010859 controller we offer undergoes full electrical testing before dispatch, ensuring the customer receives a verified product with warranty and fast courier delivery.
Where can I find the 0281010859 and 24467018LN numbers on the Bosch module?
The Bosch number 0281010859 is printed on the label attached directly to the controller housing. The Opel/GM number 24467018LN usually appears alongside it as the vehicle reference, while the Isuzu number 8973068765 may be found on an additional label or in the service documentation.
Before purchasing a controller for your Opel Astra G 1.7 CDTI Z17DTL, always compare all available numbers with those on the original module in the car to ensure software compatibility.
Does the OPEL ASTRA G Z17DTL 24467018LN BOSCH 0281010859 ECU require programming after replacement?
In most cases, the Bosch ECU 0281010859 for the Z17DTL engine may require immobilizer adaptation or VIN coding using a diagnostic tool after installation. The scope of work depends on the production year and equipment of the specific Opel Astra G.
An exact match of numbers 24467018LN and 24467020 with the original simplifies the entire procedure and reduces the time needed to start the Astra G after replacing the ECU module.
