The engine control unit (often referred to as ECU or ECM) is the most important electronic module in every modern vehicle. It acts as the main computer managing the operation of the power unit, analyzing signals from numerous sensors in real-time. It is responsible for precise fuel dosing, ignition timing, boost pressure, and the operation of exhaust gas treatment systems. When this crucial component fails, normal operation of the car becomes impossible. When faced with electronic problems, many drivers consider complicated diagnostics, circuit testing, and attempting to repair integrated circuits. In practice, the fastest, safest, and most cost-effective solution is to replace the damaged component with a fully functional, original used part from the aftermarket.
ECU Engine controller OPEL ASTRA G 1.7 CDTI Z17DTL 24467018LN BOSCH 0281010859 ISUZU 8973068765
Vendors's code: 24467020
Product code: 24467018LN
Barcode:
Code 39:
ISBN:
€81.30
Price
€81.30
Regular price:
€81.30
0%
€100.00
Price
€100.00
Regular price:
€100.00
0%
Wybierz wariant produktu:
Individual variants may differ in price
Warranty
Attention : Depending on the type of engine controller and car model, not every variant from the list below is available.
To choose the correct variant for your car and model engine controller please contact with us :
1.Locked: This variant is intended for workshops that have specialized equipment and knowledge.
Engine computer removed from a car intended for recycling with data saved from the previous car and immobilizer. To use this controller it is required to unlock it and then perform the programming procedure. For this purpose, it is necessary to use specialized diagnostic equipment for electronics.
2.Unlocked: There are many variants of the possible unlock device , so please contact us before purchasing because, depending on the type and model of the car or controller itself make some unlocking options not possible.
The controller can be prepared for assembly by our electronics in various ways: the list below
a) ECU with read PIN code (CAR PASS) - Required programming by diagnostic device. After the assmbly of the ecu to the car you need to reset that controller by typing in the pin code, and then performing the procedure of programming the immobilizer to your car
b) Cleaned Ecu out of the data of the previus car (VIRGIN). The ECU is reset to factory settings, prepared as clean. After installation in the car, it requires programming by using a specialized diagnostic device (STANDARD Unlocking of most of our ECUs if not specified the unlocking form)
c)Plug & Play (IMMO OFF) - excluded immobilizer, it has removed the safety codes from the ecu. Once its connected ecu to the car the engine runs and it does not require any programming, but it does not have the immobilizer function. - No need additional programming
d) Plug & Play (AUTO PROGRAMMING) - after assembly the ecu in the car, ECU will automatically program itself to your car. Does not require any programming
e) Plug & Play (CLON) - a cloned controller prepared for installation in a car without the need for programming. This device is copied 1 to 1 from the old device and the data is transferred to another properly working computer by our electrician service technician
Have to send us the damaged driver from which the data will be transferred to another, properly working computer.
Broken ecu HAS to have working communication with the car or diagnostic device , without proper communication Security code cant be cloned.
3.Complete: Plug & Play complete set ecu with immobilizer and all elements needed to start the vehicle without need for additional programming. Have to replace all the elements sent by us in your car.
Attention :
Delivery time depends on the selected variant: if the unlocked version is selected,
the unlocking service takes an additional time of around 1-2 business days
Ask about the product
ECU Engine controller OPEL ASTRA G 1.7 CDTI Z17DTL 24467018LN BOSCH 0281010859 ISUZU 8973068765
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
€30.00
-
shipping
(Poland)
from
€30.00
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
ECU Engine controller OPEL ASTRA G 1.7 CDTI Z17DTL 24467018LN BOSCH 0281010859 ISUZU 8973068765
Tested ECU engine controller for Opel Astra G 1.7 CDTI Z17DTL with part numbers 24467018LN and 0281010859, with warranty and fast shipping.
ECU Engine controller OPEL ASTRA G 1.7 CDTI Z17DTL 24467018LN BOSCH 0281010859 ISUZU 8973068765
Which Opel Astra G models are compatible with the Z17DTL 24467018LN ECU controller?
The ECU Engine controller OPEL ASTRA G 1.7 CDTI Z17DTL 24467018LN is a Bosch module produced under number 0281010859, used in Opel Astra G models fitted with the 1.7 CDTI turbodiesel with engine code Z17DTL manufactured by Isuzu. The Opel/GM numbers 24467018LN and 24467020, as well as reference 6235212, all refer to the same control module.
The Isuzu number 8973068765 is an additional reference used in technical documentation for the Z17DTL engine, confirming the widespread use of the Bosch 0281010859 ECU in Astra G models with the 1.7 CDTI engine.
What is the difference between numbers 24467018LN, 24467020, 6235212 and 0281010859 for this ECU?
All these numbers refer to the same physical ECU module. Numbers 24467018LN and 24467020 are Opel/GM references used when ordering parts through dealerships. The number 6235212 is a further GM cross-reference, while 0281010859 is the Bosch catalogue number as the electronics manufacturer.
The Isuzu number 8973068765 comes from the Z17DTL engine manufacturer's documentation. Knowing all these references makes it easier to identify the correct ECU module for Opel Astra G 1.7 CDTI regardless of the search source.
What symptoms can a faulty Bosch 0281010859 controller cause in Opel Astra G 1.7 CDTI?
A defective ECU module 24467018LN in the Opel Astra G with Z17DTL engine may manifest as diesel start problems, excessive exhaust smoke, loss of power during acceleration, or OBD diagnostic errors related to the injection system.
Every Bosch 0281010859 controller we offer undergoes full electrical testing before dispatch, ensuring the customer receives a verified product with warranty and fast courier delivery.
Where can I find the 0281010859 and 24467018LN numbers on the Bosch module?
The Bosch number 0281010859 is printed on the label attached directly to the controller housing. The Opel/GM number 24467018LN usually appears alongside it as the vehicle reference, while the Isuzu number 8973068765 may be found on an additional label or in the service documentation.
Before purchasing a controller for your Opel Astra G 1.7 CDTI Z17DTL, always compare all available numbers with those on the original module in the car to ensure software compatibility.
Does the OPEL ASTRA G Z17DTL 24467018LN BOSCH 0281010859 ECU require programming after replacement?
In most cases, the Bosch ECU 0281010859 for the Z17DTL engine may require immobilizer adaptation or VIN coding using a diagnostic tool after installation. The scope of work depends on the production year and equipment of the specific Opel Astra G.
An exact match of numbers 24467018LN and 24467020 with the original simplifies the entire procedure and reduces the time needed to start the Astra G after replacing the ECU module.
