Hidden inside every modern car is an advanced computer that constantly orchestrates the operation of the entire powertrain. We are talking about the engine control unit, commonly known as the ECU (Engine Control Unit) or ECM (Engine Control Module). This specific module decides on the fuel injection dose, ignition timing, boost pressure, and communication with other systems in the vehicle.
ECU Engine Controller PEUGEOT 206 BOSCH 0261206213 9632693780
Vendors's code:
Product code: 8AEA-33919
Barcode:
Code 39:
ISBN:
€65.04
Price
€65.04
without VAT
Regular price:
€65.04
-0%
€80.00
Price
€80.00
Regular price:
€80.00
-0%
Wybierz wariant produktu:
Individual variants may differ in price
Warranty
Attention : Depending on the type of engine controller and car model, not every variant from the list below is available.
To choose the correct variant for your car and model engine controller please contact with us :
1.Locked: This variant is intended for workshops that have specialized equipment and knowledge.
Engine computer removed from a car intended for recycling with data saved from the previous car and immobilizer. To use this controller it is required to unlock it and then perform the programming procedure. For this purpose, it is necessary to use specialized diagnostic equipment for electronics.
2.Unlocked: There are many variants of the possible unlock device , so please contact us before purchasing because, depending on the type and model of the car or controller itself make some unlocking options not possible.
The controller can be prepared for assembly by our electronics in various ways: the list below
a) ECU with read PIN code (CAR PASS) - Required programming by diagnostic device. After the assmbly of the ecu to the car you need to reset that controller by typing in the pin code, and then performing the procedure of programming the immobilizer to your car
b) Cleaned Ecu out of the data of the previus car (VIRGIN). The ECU is reset to factory settings, prepared as clean. After installation in the car, it requires programming by using a specialized diagnostic device (STANDARD Unlocking of most of our ECUs if not specified the unlocking form)
c)Plug & Play (IMMO OFF) - excluded immobilizer, it has removed the safety codes from the ecu. Once its connected ecu to the car the engine runs and it does not require any programming, but it does not have the immobilizer function. - No need additional programming
d) Plug & Play (AUTO PROGRAMMING) - after assembly the ecu in the car, ECU will automatically program itself to your car. Does not require any programming
e) Plug & Play (CLON) - a cloned controller prepared for installation in a car without the need for programming. This device is copied 1 to 1 from the old device and the data is transferred to another properly working computer by our electrician service technician
Have to send us the damaged driver from which the data will be transferred to another, properly working computer.
Broken ecu HAS to have working communication with the car or diagnostic device , without proper communication Security code cant be cloned.
3.Complete: Plug & Play complete set ecu with immobilizer and all elements needed to start the vehicle without need for additional programming. Have to replace all the elements sent by us in your car.
Attention :
Delivery time depends on the selected variant: if the unlocked version is selected,
the unlocking service takes an additional time of around 1-2 business days
Ask about the product
ECU Engine Controller PEUGEOT 206 BOSCH 0261206213 9632693780
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
€30.00
-
shipping
(Poland)
from
€30.00
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
What is the Ecu engine controller 0261206213 used for in the Peugeot 206?
The Ecu engine controller 0261206213 is responsible for the correct operation of the engine in the Peugeot 206. It controls engine start-up, stable operation of the power unit and the vehicle’s response to the accelerator pedal during daily driving.
What role does the Ecu engine controller 9632693780 play?
The Ecu engine controller 9632693780 is an electronic module that collects data from sensors and, based on this information, manages engine operation. Thanks to it, the Peugeot 206 operates smoothly and predictably in various conditions.
Do the numbers 0261206213 and 9632693780 refer to the same controller?
Yes, the numbers 0261206213 and 9632693780 refer to the same Ecu engine controller. The difference results from different numbering systems used by Bosch and Peugeot.
In which versions of the Peugeot 206 is the Ecu engine controller 0261206213 used?
The Ecu engine controller 0261206213 was installed in selected versions of the Peugeot 206. Exact compatibility depends on the model year and engine version, therefore it is recommended to check the vehicle VIN number before purchase.
What symptoms can a damaged Ecu engine controller 9632693780 cause?
A damaged Ecu engine controller 9632693780 may cause starting problems, uneven engine operation, illumination of the check engine light or loss of power while driving.
Does the Ecu engine controller 0261206213 require programming?
In many cases, the Ecu engine controller 0261206213 requires adaptation to the vehicle immobiliser. The shop offers two variants: the Ecu engine controller in a locked version and a unlocked version. Before choosing, it is worth reading the description of the variants.
Does the Ecu engine controller 9632693780 fit without modifications?
If the number 9632693780 matches the original controller installed in the vehicle, installation is carried out without mechanical modifications. The most important thing is choosing the correct controller variant.
Why is it worth choosing the Ecu engine controller by number 0261206213?
Selecting the Ecu engine controller by number 0261206213 ensures compatibility with the vehicle’s electrical system and correct and stable engine operation in the Peugeot 206.
What is the difference between a locked and unlocked Ecu engine controller 9632693780?
The Ecu engine controller 9632693780 in the locked version requires immobiliser programming, while the unlocked version is prepared for easier installation. Details of the differences are described in the shop’s variant description.
Is 0261206213 an original Bosch Ecu engine controller?
Yes, the number 0261206213 is the original designation of the Bosch Ecu engine controller used in the Peugeot 206, which guarantees safe and correct operation of the power unit.
