A properly functioning ABS system is the foundation of road safety. Its main task is to prevent wheel lock-up during emergency braking, which allows the driver to maintain full control of the vehicle. The heart of this system is the electronic ABS pump controller. When it fails, the system stops working. A proper diagnosis of the problem allows you to avoid unnecessary costs and quickly restore brake efficiency.
ECU Engine Controller RENAULT AVANTIME 3.0 24V BOSCH 0261206612 HOM8200036750 8200404515 1039S07993
Vendors's code: 8200404515
Product code: 9CDA-72086
Barcode:
Code 39:
ISBN:
$581.06
Price
$581.06
Regular price:
$581.06
0%
$714.71
Price
$714.71
Regular price:
$714.71
0%
Select a product option:
Individual variants may differ in price
product option
Important: Depending on the ECU type and vehicle model, not all of the options listed below may be available.
To select the correct option for your vehicle and ECU, please contact us before purchasing:
contact@auto24parts.com
1. Locked
This option is intended for professional workshops with the required specialist equipment and technical knowledge.
The ECU has been removed from a vehicle intended for recycling and still contains the immobilizer data and other information from the previous vehicle. Before it can be used in another car, it must be unlocked and then programmed using specialist automotive diagnostic equipment.
2. Unlocked
Several preparation methods may be available. The possible options depend on the ECU type, vehicle model and immobilizer system. Please contact us before purchasing, as some preparation methods are not available for every ECU.
Our electronics specialists can prepare the ECU in one of the following ways:
a) ECU with PIN code (Car Pass)
The PIN code is supplied, but programming with a suitable diagnostic tool is still required. After installing the ECU, it must be reset using the supplied PIN code and then programmed to the vehicle’s immobilizer system.
b) VIRGIN ECU
The data from the previous vehicle is removed and the ECU is restored to a clean, factory-like state. After installation, it must be programmed to the vehicle using a compatible specialist diagnostic tool. Unless another preparation method is specified in the product description, this is the standard unlocking option for most of our ECUs.
c) Plug & Play – IMMO OFF
The immobilizer function is disabled in the ECU. After installation, the engine can start without additional immobilizer programming. Please note that the vehicle will no longer have an active immobilizer function, and an immobilizer warning light or fault code may remain, depending on the vehicle model.
d) Plug & Play – Automatic Programming
After installation, the ECU automatically learns and saves the required vehicle data. No additional programming is normally required.
e) Plug & Play – 1:1 Clone
The data from your original ECU is copied to another fully functional ECU. The cloned unit is then ready for installation without additional programming.
You must send us your original ECU so that we can transfer its data to the replacement unit.
The original ECU must have working communication with the vehicle, a diagnostic tool or our programming equipment. If the required data cannot be read, a complete 1:1 clone may not be possible.
3. Complete Plug & Play Set
A complete matched set containing the ECU, immobilizer components and all other parts required to start the vehicle without additional programming. All components supplied in the set must be installed in the vehicle.
Important:
Dispatch time depends on the selected option. If an unlocked or specially prepared version is ordered, the preparation service usually requires an additional 1–2 business days.
Ask about the product
ECU Engine Controller RENAULT AVANTIME 3.0 24V BOSCH 0261206612 HOM8200036750 8200404515 1039S07993
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
$30.63
-
shipping
(Poland)
from
$30.63
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Engine control unit Ecu engine controller Renault 0281030576 237102265R
Ecu engine controller with the numbers 0281030576 and 237102265R is a proven part for Renault vehicles that ensures proper and stable engine operation during everyday driving, available in a locked or unlocked version – before purchase, it is worth reviewing the description of the variants.
What is the Ecu engine controller 0261206612 in Renault Avantime 3.0 24V?
The Ecu engine controller 0261206612 is responsible for the correct operation of the V6 3.0 24V engine in Renault Avantime. It controls engine operation during start-up and while driving, ensuring smooth and stable operation of the power unit.
What role does the Ecu engine controller HOM8200036750 play?
The Ecu engine controller HOM8200036750 manages engine operation based on signals from various vehicle components. Thanks to it, the car responds correctly to the accelerator and runs evenly in everyday use.
Do the numbers 0261206612, HOM8200036750 and 8200404515 refer to the same controller?
Yes, the designations 0261206612, HOM8200036750 and 8200404515 refer to the same Ecu engine controller. Different numbers result from manufacturer and brand markings, while the function and application remain the same.
What is the purpose of the Ecu engine controller 1039S07993 in Avantime?
The Ecu engine controller 1039S07993 is responsible for coordinating the operation of the Renault Avantime 3.0 24V engine. It ensures correct operating parameters of the power unit and stable vehicle behavior in various driving conditions.
Is the Ecu engine controller 0261206612 available in different variants?
Yes, the Ecu engine controller 0261206612 is available in two variants: locked and unlocked. Before choosing the appropriate version, it is worth reading the variant descriptions to select the controller for your vehicle.
When is it worth replacing the Ecu engine controller 8200404515?
Replacing the Ecu engine controller 8200404515 is a good solution, when problems with starting the car occur, uneven engine operation or electronics-related errors. A functional controller restores driving comfort and confidence.
Why is the Ecu engine controller number HOM8200036750 so important?
The number HOM8200036750 allows precise matching of the Ecu engine controller to Renault Avantime 3.0 24V. Part number compatibility is the key to proper operation and trouble-free installation.
