A properly functioning ABS system is the foundation of road safety. Its main task is to prevent wheel lock-up during emergency braking, which allows the driver to maintain full control of the vehicle. The heart of this system is the electronic ABS pump controller. When it fails, the system stops working. A proper diagnosis of the problem allows you to avoid unnecessary costs and quickly restore brake efficiency.
ECU Engine controller Seat Cordoba Ibiza 1.6 Bosch 0261203346/347 032906026F 26SA3196
Vendors's code: 032906026F
Product code: 0261203346/347
Barcode:
Code 39:
ISBN:
€56.91
Price
€56.91
Regular price:
€56.91
0%
€70.00
Price
€70.00
Regular price:
€70.00
0%
Select a product option:
Individual variants may differ in price
product option
Important: Depending on the ECU type and vehicle model, not all of the options listed below may be available.
To select the correct option for your vehicle and ECU, please contact us before purchasing:
contact@auto24parts.com
1. Locked
This option is intended for professional workshops with the required specialist equipment and technical knowledge.
The ECU has been removed from a vehicle intended for recycling and still contains the immobilizer data and other information from the previous vehicle. Before it can be used in another car, it must be unlocked and then programmed using specialist automotive diagnostic equipment.
2. Unlocked
Several preparation methods may be available. The possible options depend on the ECU type, vehicle model and immobilizer system. Please contact us before purchasing, as some preparation methods are not available for every ECU.
Our electronics specialists can prepare the ECU in one of the following ways:
a) ECU with PIN code (Car Pass)
The PIN code is supplied, but programming with a suitable diagnostic tool is still required. After installing the ECU, it must be reset using the supplied PIN code and then programmed to the vehicle’s immobilizer system.
b) VIRGIN ECU
The data from the previous vehicle is removed and the ECU is restored to a clean, factory-like state. After installation, it must be programmed to the vehicle using a compatible specialist diagnostic tool. Unless another preparation method is specified in the product description, this is the standard unlocking option for most of our ECUs.
c) Plug & Play – IMMO OFF
The immobilizer function is disabled in the ECU. After installation, the engine can start without additional immobilizer programming. Please note that the vehicle will no longer have an active immobilizer function, and an immobilizer warning light or fault code may remain, depending on the vehicle model.
d) Plug & Play – Automatic Programming
After installation, the ECU automatically learns and saves the required vehicle data. No additional programming is normally required.
e) Plug & Play – 1:1 Clone
The data from your original ECU is copied to another fully functional ECU. The cloned unit is then ready for installation without additional programming.
You must send us your original ECU so that we can transfer its data to the replacement unit.
The original ECU must have working communication with the vehicle, a diagnostic tool or our programming equipment. If the required data cannot be read, a complete 1:1 clone may not be possible.
3. Complete Plug & Play Set
A complete matched set containing the ECU, immobilizer components and all other parts required to start the vehicle without additional programming. All components supplied in the set must be installed in the vehicle.
Important:
Dispatch time depends on the selected option. If an unlocked or specially prepared version is ordered, the preparation service usually requires an additional 1–2 business days.
Ask about the product
ECU Engine controller Seat Cordoba Ibiza 1.6 Bosch 0261203346/347 032906026F 26SA3196
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
€30.00
-
shipping
(Poland)
from
€30.00
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
ECU ENGINE CONTROLLER SEAT CORDOBA IBIZA 1.6 0261203346/347 032906026F
Tested ECU Engine controller for Seat Cordoba and Seat Ibiza 1.6, part numbers Bosch 0261203346/347 and 032906026F, with warranty and fast shipping.
ECU Engine controller Seat Cordoba Ibiza 1.6 Bosch 0261203346/347 032906026F 26SA3196
Which models use ECU Bosch 0261203346/347 / 032906026F?
This ECU Engine controller with part numbers Bosch 0261203346/347 and 032906026F is listed for selected Seat Cordoba and Seat Ibiza vehicles with the 1.6 petrol engine. The safest way to confirm fitment is to match the exact numbers on your original ECU label.
You may also see the same references printed with spaces, such as 0 261 203 346/347 or 032 906 026 F.
What does Bosch 0261203346/347 mean—are these two different numbers?
The format Bosch 0261203346/347 usually refers to two related Bosch number variants: 0261203346 and 0261203347. They are commonly used interchangeably on labels and in descriptions.
For correct selection, the main matching points remain 0261203346/347 and 032906026F.
What does the engine ECU do in a Seat Ibiza 1.6?
The engine ECU manages key engine functions while you drive. It processes sensor signals and controls essential operating parameters so the Seat Ibiza 1.6 runs smoothly and consistently.
That is why matching 032906026F and Bosch 0261203346/347 is so important when replacing the ECU.
Common symptoms of a faulty ECU 0261203346/347 in Seat Cordoba
A failing ECU can cause hard starting, rough running, loss of power, or a Check Engine light. In some cases, fault codes may return even after clearing.
This ECU 032906026F / 0261203346/347 is offered as a tested unit with warranty and fast shipping.
Why is part number 032 906 026 F critical when choosing an ECU?
Part number 032906026F identifies a specific ECU version for Seat Cordoba/Ibiza 1.6. Even similar-looking units can differ in configuration or software, which may lead to incorrect operation after installation.
Before ordering, compare all label markings, including 032906026F and Bosch 0261203346/347.
Does ECU 0261203346/347 require coding or adaptation after installation?
Depending on the vehicle version and its electronics, ECU replacement may require adaptation/coding after installation so it can work correctly with other modules.
Exact matching of 032906026F and Bosch 0261203346/347 makes installation easier and helps ensure correct operation after replacement.
