A properly functioning ABS system is the foundation of road safety. Its main task is to prevent wheel lock-up during emergency braking, which allows the driver to maintain full control of the vehicle. The heart of this system is the electronic ABS pump controller. When it fails, the system stops working. A proper diagnosis of the problem allows you to avoid unnecessary costs and quickly restore brake efficiency.
ECU Engine controller SEAT LEON TOLEDO 1.9 TDI BOSCH 0281011997 038906012JJ EDC15VM+
Vendors's code: 038906012JJ
Product code: 0281011997
Barcode:
Code 39:
ISBN:
975,61 zł
Price
975,61 zł
Regular price:
975,61 zł
0%
1 200,00 zł
Price
1 200,00 zł
Regular price:
1 200,00 zł
0%
Select a product option:
Individual variants may differ in price
product option
Important: Depending on the ECU type and vehicle model, not all of the options listed below may be available.
To select the correct option for your vehicle and ECU, please contact us before purchasing:
contact@auto24parts.com
1. Locked
This option is intended for professional workshops with the required specialist equipment and technical knowledge.
The ECU has been removed from a vehicle intended for recycling and still contains the immobilizer data and other information from the previous vehicle. Before it can be used in another car, it must be unlocked and then programmed using specialist automotive diagnostic equipment.
2. Unlocked
Several preparation methods may be available. The possible options depend on the ECU type, vehicle model and immobilizer system. Please contact us before purchasing, as some preparation methods are not available for every ECU.
Our electronics specialists can prepare the ECU in one of the following ways:
a) ECU with PIN code (Car Pass)
The PIN code is supplied, but programming with a suitable diagnostic tool is still required. After installing the ECU, it must be reset using the supplied PIN code and then programmed to the vehicle’s immobilizer system.
b) VIRGIN ECU
The data from the previous vehicle is removed and the ECU is restored to a clean, factory-like state. After installation, it must be programmed to the vehicle using a compatible specialist diagnostic tool. Unless another preparation method is specified in the product description, this is the standard unlocking option for most of our ECUs.
c) Plug & Play – IMMO OFF
The immobilizer function is disabled in the ECU. After installation, the engine can start without additional immobilizer programming. Please note that the vehicle will no longer have an active immobilizer function, and an immobilizer warning light or fault code may remain, depending on the vehicle model.
d) Plug & Play – Automatic Programming
After installation, the ECU automatically learns and saves the required vehicle data. No additional programming is normally required.
e) Plug & Play – 1:1 Clone
The data from your original ECU is copied to another fully functional ECU. The cloned unit is then ready for installation without additional programming.
You must send us your original ECU so that we can transfer its data to the replacement unit.
The original ECU must have working communication with the vehicle, a diagnostic tool or our programming equipment. If the required data cannot be read, a complete 1:1 clone may not be possible.
3. Complete Plug & Play Set
A complete matched set containing the ECU, immobilizer components and all other parts required to start the vehicle without additional programming. All components supplied in the set must be installed in the vehicle.
Important:
Dispatch time depends on the selected option. If an unlocked or specially prepared version is ordered, the preparation service usually requires an additional 1–2 business days.
Ask about the product
ECU Engine controller SEAT LEON TOLEDO 1.9 TDI BOSCH 0281011997 038906012JJ EDC15VM+
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
120,00 zł
-
shipping
(Poland)
from
120,00 zł
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
ECU ENGINE CONTROLLER SEAT LEON TOLEDO 1.9 TDI BOSCH 0281011997 038906012JJ EDC15VM+
Tested ECU Engine controller for Seat Leon / Seat Toledo 1.9 TDI (Bosch EDC15VM+), part numbers 0281011997 and 038906012JJ, with warranty and fast shipping.
ECU Engine controller SEAT LEON TOLEDO 1.9 TDI BOSCH 0281011997 038906012JJ EDC15VM+
Which Seat models does the ECU Engine controller 0281011997 / 038906012JJ fit?
The ECU Engine controller SEAT LEON TOLEDO 1.9 TDI BOSCH 0281011997 038906012JJ EDC15VM+ is used on selected Seat Leon and Seat Toledo versions with the 1.9 TDI engine. It manages engine operation and works with the vehicle’s electronics in everyday driving.
To confirm compatibility, match the exact numbers on your original ECU: 0281011997 and 038906012JJ (some labels may show the same references with spacing).
What does the Bosch EDC15VM+ ECU 0281011997 do?
The Bosch EDC15VM+ ECU Engine controller 0281011997 controls key engine parameters for a 1.9 TDI. It processes sensor signals, manages fuel/engine control functions, and communicates with other modules.
A properly working ECU supports smooth running, consistent acceleration, and stable day-to-day performance.
What symptoms can a faulty Seat ECU 038906012JJ cause?
A faulty 038906012JJ ECU may cause starting problems, rough running, power loss, warning lights, or diagnostic communication errors. In some cases, security/immobilizer-related issues can also appear after replacement.
This 0281011997 / 038906012JJ ECU Engine controller is checked before dispatch, so you receive a tested unit with warranty and fast shipping.
Why are part numbers 0281011997 and 038906012JJ important when choosing an ECU?
Part numbers 0281011997 and 038906012JJ help you select the correct ECU for your specific Seat Leon / Toledo 1.9 TDI setup. Similar-looking units can still differ in configuration or software and may not work properly after installation.
Before ordering, compare all label markings (Bosch number + OEM reference) to avoid mistakes.
Does the Seat 1.9 TDI ECU 0281011997 require coding after installation?
Depending on the vehicle version, the Seat 1.9 TDI ECU 0281011997 may require adaptation/coding after installation, especially if it is linked to the immobilizer and security systems.
Matching both 0281011997 and 038906012JJ makes replacement easier and improves the chances of a trouble-free install.
