A properly functioning ABS system is the foundation of road safety. Its main task is to prevent wheel lock-up during emergency braking, which allows the driver to maintain full control of the vehicle. The heart of this system is the electronic ABS pump controller. When it fails, the system stops working. A proper diagnosis of the problem allows you to avoid unnecessary costs and quickly restore brake efficiency.
Skoda Octavia 1.8 20V Engine Control Unit Bosch 0261206144 – OEM 06A906018DJ
Vendors's code: 0261206144
Product code: 06A906018DJ
Barcode:
Code 39:
ISBN:
€81.30
Price
€81.30
€100.00
Price
€100.00
Select a product option:
Individual variants may differ in price
product option
Important: Depending on the ECU type and vehicle model, not all of the options listed below may be available.
To select the correct option for your vehicle and ECU, please contact us before purchasing:
contact@auto24parts.com
1. Locked
This option is intended for professional workshops with the required specialist equipment and technical knowledge.
The ECU has been removed from a vehicle intended for recycling and still contains the immobilizer data and other information from the previous vehicle. Before it can be used in another car, it must be unlocked and then programmed using specialist automotive diagnostic equipment.
2. Unlocked
Several preparation methods may be available. The possible options depend on the ECU type, vehicle model and immobilizer system. Please contact us before purchasing, as some preparation methods are not available for every ECU.
Our electronics specialists can prepare the ECU in one of the following ways:
a) ECU with PIN code (Car Pass)
The PIN code is supplied, but programming with a suitable diagnostic tool is still required. After installing the ECU, it must be reset using the supplied PIN code and then programmed to the vehicle’s immobilizer system.
b) VIRGIN ECU
The data from the previous vehicle is removed and the ECU is restored to a clean, factory-like state. After installation, it must be programmed to the vehicle using a compatible specialist diagnostic tool. Unless another preparation method is specified in the product description, this is the standard unlocking option for most of our ECUs.
c) Plug & Play – IMMO OFF
The immobilizer function is disabled in the ECU. After installation, the engine can start without additional immobilizer programming. Please note that the vehicle will no longer have an active immobilizer function, and an immobilizer warning light or fault code may remain, depending on the vehicle model.
d) Plug & Play – Automatic Programming
After installation, the ECU automatically learns and saves the required vehicle data. No additional programming is normally required.
e) Plug & Play – 1:1 Clone
The data from your original ECU is copied to another fully functional ECU. The cloned unit is then ready for installation without additional programming.
You must send us your original ECU so that we can transfer its data to the replacement unit.
The original ECU must have working communication with the vehicle, a diagnostic tool or our programming equipment. If the required data cannot be read, a complete 1:1 clone may not be possible.
3. Complete Plug & Play Set
A complete matched set containing the ECU, immobilizer components and all other parts required to start the vehicle without additional programming. All components supplied in the set must be installed in the vehicle.
Important:
Dispatch time depends on the selected option. If an unlocked or specially prepared version is ordered, the preparation service usually requires an additional 1–2 business days.
Ask about the product
Skoda Octavia 1.8 20V Engine Control Unit Bosch 0261206144 – OEM 06A906018DJ
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
€30.00
-
shipping
(Poland)
from
€30.00
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
How to Check if This ECU Matches Your Skoda Octavia
Looking for an engine control unit (ECU) for a Skoda Octavia 1.8 20V? Compare the OEM number 06A906018DJ with the number on your original unit. The Bosch reference 0261206144 provides an additional way to identify the correct part.
This used engine control unit has been tested and comes with a 1-month warranty. Check the complete part numbers before ordering to help avoid choosing the wrong variant. Order online with fast shipping from Auto24Parts.
Find the Right Engine ECU by Matching Its Part Numbers
When replacing an engine control unit, it is important to identify the correct version for your vehicle. The vehicle model and engine capacity alone may not be enough to confirm compatibility.
This listing is for a Bosch engine control unit identified by the following references: 06A906018DJ and 0261206144. The numbers may also appear with spaces on the label, for example, 06A 906 018 DJ and 0 261 206 144.
What to Check Before Buying
Read the numbers on your original ECU and compare them with the references provided in this listing. Pay attention to the complete code, including the final letters, as similar-looking numbers do not necessarily indicate interchangeable units.
The OEM reference 06A906018DJ helps identify the part according to the vehicle manufacturer's numbering system. The Bosch reference 0261206144 identifies the unit using the manufacturer's own part number. Comparing both references can help you verify whether you have found the correct ECU.
Installation and Vehicle Compatibility
Before ordering, confirm that this ECU matches your vehicle's existing configuration. Depending on the vehicle and the replacement unit, programming, immobiliser adaptation or other electronic configuration may be required. Do not assume that the unit will work immediately after installation.
If you are unsure about compatibility, contact the seller before purchasing. A clear photo of the label on your original ECU, showing all part numbers, can help with identification.
Frequently Asked Questions About the Skoda Octavia ECU
Is OEM number 06A906018DJ enough to identify the correct ECU?
It is an important reference for identifying this unit. For a more reliable check, also compare the Bosch number 0261206144 and any other markings on the original ECU label.
Will an ECU with a similar part number fit my Skoda Octavia?
Not necessarily. Even a small difference in the part number can indicate a different version. Check the complete references and confirm compatibility before placing your order.
What if the Bosch number matches but the OEM number is different?
Do not assume that the units are interchangeable. Send the seller a clear photo of your original ECU label and ask for compatibility confirmation before buying.
Does a replacement engine control unit need programming?
Programming or immobiliser adaptation may be required, depending on the vehicle configuration and the replacement ECU. Confirm the requirements before installation.
How can I verify that this ECU is suitable for my Skoda Octavia 1.8 20V?
Compare the numbers on your original unit with 06A906018DJ and 0261206144. If you are uncertain, send the seller a photo of the label for a compatibility check.
