A used engine control unit will not usually start your car straight away, because its memory holds the immobiliser data of the car it came from. We explain how ECU programming, coding and cloning differ, and which preparation option to choose for your replacement ECU.
Engine Control Unit Volkswagen, Skoda, Audi Bosch 05E907309 0261S16449
Vendors's code: 0261S16449
Product code: 0261S16449
Barcode:
Code 39:
ISBN:
Select a product option:
Individual variants may differ in price
product option
Important: Depending on the ECU type and vehicle model, not all of the options listed below may be available.
To select the correct option for your vehicle and ECU, please contact us before purchasing:
contact@auto24parts.com
1. Locked
This option is intended for professional workshops with the required specialist equipment and technical knowledge.
The ECU has been removed from a vehicle intended for recycling and still contains the immobilizer data and other information from the previous vehicle. Before it can be used in another car, it must be unlocked and then programmed using specialist automotive diagnostic equipment.
2. Unlocked
Several preparation methods may be available. The possible options depend on the ECU type, vehicle model and immobilizer system. Please contact us before purchasing, as some preparation methods are not available for every ECU.
Our electronics specialists can prepare the ECU in one of the following ways:
a) ECU with PIN code (Car Pass)
The PIN code is supplied, but programming with a suitable diagnostic tool is still required. After installing the ECU, it must be reset using the supplied PIN code and then programmed to the vehicle’s immobilizer system.
b) VIRGIN ECU
The data from the previous vehicle is removed and the ECU is restored to a clean, factory-like state. After installation, it must be programmed to the vehicle using a compatible specialist diagnostic tool. Unless another preparation method is specified in the product description, this is the standard unlocking option for most of our ECUs.
c) Plug & Play – IMMO OFF
The immobilizer function is disabled in the ECU. After installation, the engine can start without additional immobilizer programming. Please note that the vehicle will no longer have an active immobilizer function, and an immobilizer warning light or fault code may remain, depending on the vehicle model.
d) Plug & Play – Automatic Programming
After installation, the ECU automatically learns and saves the required vehicle data. No additional programming is normally required.
e) Plug & Play – 1:1 Clone
The data from your original ECU is copied to another fully functional ECU. The cloned unit is then ready for installation without additional programming.
You must send us your original ECU so that we can transfer its data to the replacement unit.
The original ECU must have working communication with the vehicle, a diagnostic tool or our programming equipment. If the required data cannot be read, a complete 1:1 clone may not be possible.
3. Complete Plug & Play Set
A complete matched set containing the ECU, immobilizer components and all other parts required to start the vehicle without additional programming. All components supplied in the set must be installed in the vehicle.
Important:
Dispatch time depends on the selected option. If an unlocked or specially prepared version is ordered, the preparation service usually requires an additional 1–2 business days.
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
How can you check whether the 05E907309 ECU will fit your vehicle?
Compare VW number 05E907309 and Bosch number 0 261 S16 449 with the label on your current unit. This is a used petrol engine ECU in working order, used in Volkswagen, Skoda and Audi vehicles.
Engine Control Unit Volkswagen, Skoda, Audi Bosch 05E907309 0261S16449
The Bosch ECU numbered 05E907309 runs a petrol engine – Bosch number 0 261 S16 449 belongs to the 0 261 series, which Bosch uses for petrol engine ECUs. The unit is intended for Volkswagen, Skoda and Audi vehicles. It controls injection and ignition based on sensor signals.
Numbers to compare
- 05E907309 – VW part number
- 0261S16449 – Bosch number, shown on the label as 0 261 S16 449
The Bosch number contains the letter S – copy it exactly, as a single wrong character leads to a different part. This unit's VW number has no letter at the end.
Typical fault symptoms
- the engine warning light stays on and cleared faults return immediately,
- the engine jerks, loses power or goes into limp mode,
- the tester cannot see the ECU,
- starting problems after water ingress or a voltage spike.
The first step should be measuring the supply voltage and checking the earths – only then replace the unit.
Locked or unlocked
We sell this ECU in two versions. Locked – untouched, with the previous vehicle's data and immobiliser; chosen by workshops that do the unlocking, programming and matching in-house. Unlocked – prepared before dispatch, usually within 1–2 working days.
Which method is an option (PIN / CAR PASS, Virgin, IMMO OFF, auto programming, cloning) depends on the part number, software and immobiliser. Contact us before buying and we'll check. You will find the full description on the page ECU preparation options.
Questions and answers
| Is it the letter S or the digit 5 in the Bosch number? |
|---|
| It is the letter S: 0 261 S16 449. Pay particular attention to it when comparing. |
| Do I need to do anything with my existing ECU before fitting the 05E907309? |
| That depends on the preparation method – some, such as cloning, require your current unit. We'll agree what is needed before you buy. |
| What warranty covers this unit? |
| You will find the warranty period in the product features table. The ECU itself is used, in working order and in good condition. |
We're happy to help you choose – email contact@auto24parts.com and give us all the numbers from the casing of your current unit.