A used engine control unit will not usually start your car straight away, because its memory holds the immobiliser data of the car it came from. We explain how ECU programming, coding and cloning differ, and which preparation option to choose for your replacement ECU.
Engine Control Unit Volkswagen Skoda 2.0 TDI Bosch EDC17C46 03L906018NF 0281018030
Vendors's code: 0281018030
Product code: 0281018030
Barcode:
Code 39:
ISBN:
Select a product option:
Individual variants may differ in price
product option
Important: Depending on the ECU type and vehicle model, not all of the options listed below may be available.
To select the correct option for your vehicle and ECU, please contact us before purchasing:
contact@auto24parts.com
1. Locked
This option is intended for professional workshops with the required specialist equipment and technical knowledge.
The ECU has been removed from a vehicle intended for recycling and still contains the immobilizer data and other information from the previous vehicle. Before it can be used in another car, it must be unlocked and then programmed using specialist automotive diagnostic equipment.
2. Unlocked
Several preparation methods may be available. The possible options depend on the ECU type, vehicle model and immobilizer system. Please contact us before purchasing, as some preparation methods are not available for every ECU.
Our electronics specialists can prepare the ECU in one of the following ways:
a) ECU with PIN code (Car Pass)
The PIN code is supplied, but programming with a suitable diagnostic tool is still required. After installing the ECU, it must be reset using the supplied PIN code and then programmed to the vehicle’s immobilizer system.
b) VIRGIN ECU
The data from the previous vehicle is removed and the ECU is restored to a clean, factory-like state. After installation, it must be programmed to the vehicle using a compatible specialist diagnostic tool. Unless another preparation method is specified in the product description, this is the standard unlocking option for most of our ECUs.
c) Plug & Play – IMMO OFF
The immobilizer function is disabled in the ECU. After installation, the engine can start without additional immobilizer programming. Please note that the vehicle will no longer have an active immobilizer function, and an immobilizer warning light or fault code may remain, depending on the vehicle model.
d) Plug & Play – Automatic Programming
After installation, the ECU automatically learns and saves the required vehicle data. No additional programming is normally required.
e) Plug & Play – 1:1 Clone
The data from your original ECU is copied to another fully functional ECU. The cloned unit is then ready for installation without additional programming.
You must send us your original ECU so that we can transfer its data to the replacement unit.
The original ECU must have working communication with the vehicle, a diagnostic tool or our programming equipment. If the required data cannot be read, a complete 1:1 clone may not be possible.
3. Complete Plug & Play Set
A complete matched set containing the ECU, immobilizer components and all other parts required to start the vehicle without additional programming. All components supplied in the set must be installed in the vehicle.
Important:
Dispatch time depends on the selected option. If an unlocked or specially prepared version is ordered, the preparation service usually requires an additional 1–2 business days.
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Where can I find number 03L906018NF in a Volkswagen or Skoda 2.0 TDI?
Look for it on the engine ECU sticker – next to Bosch number 0281018030 (0 281 018 030) and the EDC17C46 designation. The module on offer comes from a 2011 2.0 TDI vehicle, and is used and in working order.
Engine Control Unit Volkswagen, Skoda 2.0 TDI Bosch EDC17C46 03L906018NF 0281018030
A 2011 Volkswagen or Skoda 2.0 TDI – that is the vehicle ECU 03L906018NF comes from. It is a Bosch module from the EDC17C46 family, designed for diesel engines. It is responsible for, among other things, injection pressure and quantity as well as turbo boost, and the full number on the label is needed to choose the right one.
Markings worth comparing
- 03L906018NF – VW part number
- 0281018030 – Bosch number, as printed on the label 0 281 018 030
- EDC17C46 – Bosch ECU family
03L906018 modules come in many versions. The letters NF at the end of the number indicate the software and hardware version – a module with a different suffix may not work with your engine.
Symptoms of a faulty 2.0 TDI ECU
- the engine will not start, while the starter motor works normally,
- the ECU does not respond during diagnostics,
- sudden limp mode and lack of power,
- failure after a voltage spike or moisture in the connector.
First check the power supply, earths and the condition of the plug – they are often the cause.
Which option to choose
If you want a module prepared by us, choose the unlocked version – this usually takes 1–2 working days before dispatch. The locked version has the data and immobiliser of the previous car; it is bought by workshops that will unlock, program and match it themselves.
The available methods (PIN / CAR PASS, Virgin, IMMO OFF, auto programming, cloning) vary depending on the number, software and immobiliser, so not every one will be possible. Please ask before buying. Description: ECU preparation options.
Questions and answers
| Are 03L906018NF and 0281018030 the same ECU? |
|---|
| Yes – the first number was assigned by Volkswagen, the second by Bosch. |
| Does the module need programming after fitting? |
| The locked version does. For the unlocked version, we confirm the scope of work before purchase. |
| What condition is the ECU in? |
| Used, in working order and in good condition. You will find the warranty period in the product features table. |
Send questions about number 03L906018NF to contact@auto24parts.com.