A properly functioning ABS system is the foundation of road safety. Its main task is to prevent wheel lock-up during emergency braking, which allows the driver to maintain full control of the vehicle. The heart of this system is the electronic ABS pump controller. When it fails, the system stops working. A proper diagnosis of the problem allows you to avoid unnecessary costs and quickly restore brake efficiency.
ECU Engine Controller ALFA ROMEO 145 1.8, BOSCH 0261204479 00464814830
Vendors's code:
Product code: F4DC-963A1
Barcode:
Code 39:
ISBN:
Select a product option:
Individual variants may differ in price
product option
Important: Depending on the ECU type and vehicle model, not all of the options listed below may be available.
To select the correct option for your vehicle and ECU, please contact us before purchasing:
contact@auto24parts.com
1. Locked
This option is intended for professional workshops with the required specialist equipment and technical knowledge.
The ECU has been removed from a vehicle intended for recycling and still contains the immobilizer data and other information from the previous vehicle. Before it can be used in another car, it must be unlocked and then programmed using specialist automotive diagnostic equipment.
2. Unlocked
Several preparation methods may be available. The possible options depend on the ECU type, vehicle model and immobilizer system. Please contact us before purchasing, as some preparation methods are not available for every ECU.
Our electronics specialists can prepare the ECU in one of the following ways:
a) ECU with PIN code (Car Pass)
The PIN code is supplied, but programming with a suitable diagnostic tool is still required. After installing the ECU, it must be reset using the supplied PIN code and then programmed to the vehicle’s immobilizer system.
b) VIRGIN ECU
The data from the previous vehicle is removed and the ECU is restored to a clean, factory-like state. After installation, it must be programmed to the vehicle using a compatible specialist diagnostic tool. Unless another preparation method is specified in the product description, this is the standard unlocking option for most of our ECUs.
c) Plug & Play – IMMO OFF
The immobilizer function is disabled in the ECU. After installation, the engine can start without additional immobilizer programming. Please note that the vehicle will no longer have an active immobilizer function, and an immobilizer warning light or fault code may remain, depending on the vehicle model.
d) Plug & Play – Automatic Programming
After installation, the ECU automatically learns and saves the required vehicle data. No additional programming is normally required.
e) Plug & Play – 1:1 Clone
The data from your original ECU is copied to another fully functional ECU. The cloned unit is then ready for installation without additional programming.
You must send us your original ECU so that we can transfer its data to the replacement unit.
The original ECU must have working communication with the vehicle, a diagnostic tool or our programming equipment. If the required data cannot be read, a complete 1:1 clone may not be possible.
3. Complete Plug & Play Set
A complete matched set containing the ECU, immobilizer components and all other parts required to start the vehicle without additional programming. All components supplied in the set must be installed in the vehicle.
Important:
Dispatch time depends on the selected option. If an unlocked or specially prepared version is ordered, the preparation service usually requires an additional 1–2 business days.
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Engine control unit Alfa Romeo 145 1.8 Bosch 0261204479 00464814830
The engine control unit for Alfa Romeo 145 1.8 Bosch with part numbers 0261204479 and 00464814830 is a well-matched solution for replacement or fault repair – before purchasing, it is worth checking the variant description, as the engine controller is available in a locked or unlocked version.
What is the Alfa Romeo 145 1.8 engine ECU BOSCH 0261204479?
The Ecu engine controller BOSCH 0261204479 in the Alfa Romeo 145 1.8 is a component responsible for proper and stable engine operation. Its role is to ensure smooth driving and correct vehicle response during everyday use.
Which model does the engine ECU 00464814830 BOSCH fit?
The Ecu engine controller BOSCH with part number 00464814830 is used in the Alfa Romeo 145 with the 1.8 engine. To ensure compatibility, the part number should always be compared with the one originally installed in the vehicle.
Does the Alfa Romeo 145 1.8 engine ECU 0261204479 require programming?
In many cases, the Ecu engine controller 0261204479 in the Alfa Romeo 145 1.8 requires adaptation to the vehicle. This allows proper cooperation between the ECU and the other vehicle systems.
What symptoms can a faulty 00464814830 ECU cause in the Alfa Romeo 145?
A damaged Ecu engine controller 00464814830 in the Alfa Romeo 145 1.8 may cause starting problems, uneven engine operation or a loss of power. Warning lights often appear on the dashboard as well.
Is a used BOSCH 0261204479 engine ECU a good choice?
A used Ecu engine controller BOSCH 0261204479 for the Alfa Romeo 145 1.8 is a popular solution that helps reduce repair costs. A tested unit can work just as reliably as a new one.
How can I check if the engine ECU 00464814830 fits my Alfa Romeo 145?
To make sure the Ecu engine controller 00464814830 is suitable for the Alfa Romeo 145 1.8, it is best to compare the part number on the old ECU housing with the number of the offered product.
Is the Alfa Romeo 145 1.8 BOSCH engine ECU available in different variants?
Yes, the BOSCH Ecu engine controller for the Alfa Romeo 145 1.8 is available in two variants: a locked engine ECU or a virgin version. Before purchasing, it is worth reviewing the variant descriptions to choose the right option.
Why is the part number 0261204479 so important when choosing an ECU?
The part number 0261204479 clearly identifies the BOSCH Ecu engine controller intended for the Alfa Romeo 145 1.8. Matching the part number is key to proper vehicle operation after installation.
Does replacing the 00464814830 ECU improve engine performance in the Alfa Romeo 145?
Replacing the Ecu engine controller 00464814830 in the Alfa Romeo 145 1.8 often restores smooth engine operation, stable RPM and driving comfort, especially when the previous ECU was faulty.
What should be checked before buying the BOSCH 0261204479 engine ECU?
Before purchasing the BOSCH Ecu engine controller 0261204479 for the Alfa Romeo 145 1.8, it is worth checking the part number, ECU variant and detailed product description. This is the easiest way to avoid mistakes and issues after installation.