A properly functioning ABS system is the foundation of road safety. Its main task is to prevent wheel lock-up during emergency braking, which allows the driver to maintain full control of the vehicle. The heart of this system is the electronic ABS pump controller. When it fails, the system stops working. A proper diagnosis of the problem allows you to avoid unnecessary costs and quickly restore brake efficiency.
Engine Control Unit Alfa Romeo 147 1.9 JTDM 0281012858 55204755 4D34A3ABM 1039S12192
Vendors's code: 55204755
Product code: 2F87-723AE
Barcode:
Code 39:
ISBN:
€121.95
Price
€121.95
€150.00
Price
€150.00
In stock
Select a product option:
Individual variants may differ in price
product option
Important: Depending on the ECU type and vehicle model, not all of the options listed below may be available.
To select the correct option for your vehicle and ECU, please contact us before purchasing:
contact@auto24parts.com
1. Locked
This option is intended for professional workshops with the required specialist equipment and technical knowledge.
The ECU has been removed from a vehicle intended for recycling and still contains the immobilizer data and other information from the previous vehicle. Before it can be used in another car, it must be unlocked and then programmed using specialist automotive diagnostic equipment.
2. Unlocked
Several preparation methods may be available. The possible options depend on the ECU type, vehicle model and immobilizer system. Please contact us before purchasing, as some preparation methods are not available for every ECU.
Our electronics specialists can prepare the ECU in one of the following ways:
a) ECU with PIN code (Car Pass)
The PIN code is supplied, but programming with a suitable diagnostic tool is still required. After installing the ECU, it must be reset using the supplied PIN code and then programmed to the vehicle’s immobilizer system.
b) VIRGIN ECU
The data from the previous vehicle is removed and the ECU is restored to a clean, factory-like state. After installation, it must be programmed to the vehicle using a compatible specialist diagnostic tool. Unless another preparation method is specified in the product description, this is the standard unlocking option for most of our ECUs.
c) Plug & Play – IMMO OFF
The immobilizer function is disabled in the ECU. After installation, the engine can start without additional immobilizer programming. Please note that the vehicle will no longer have an active immobilizer function, and an immobilizer warning light or fault code may remain, depending on the vehicle model.
d) Plug & Play – Automatic Programming
After installation, the ECU automatically learns and saves the required vehicle data. No additional programming is normally required.
e) Plug & Play – 1:1 Clone
The data from your original ECU is copied to another fully functional ECU. The cloned unit is then ready for installation without additional programming.
You must send us your original ECU so that we can transfer its data to the replacement unit.
The original ECU must have working communication with the vehicle, a diagnostic tool or our programming equipment. If the required data cannot be read, a complete 1:1 clone may not be possible.
3. Complete Plug & Play Set
A complete matched set containing the ECU, immobilizer components and all other parts required to start the vehicle without additional programming. All components supplied in the set must be installed in the vehicle.
Important:
Dispatch time depends on the selected option. If an unlocked or specially prepared version is ordered, the preparation service usually requires an additional 1–2 business days.
Ask about the product
Engine Control Unit Alfa Romeo 147 1.9 JTDM 0281012858 55204755 4D34A3ABM 1039S12192
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
€30.00
-
shipping
(Poland)
from
€30.00
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Engine control unit Alfa Romeo 147 1.9 JTDM 0281012858 55204755 4D34A3ABM 1039S12192
The engine control unit for Alfa Romeo 147 1.9 JTDM with part numbers 0281012858, 55204755, 4D34A3ABM and 1039S12192 is a proven solution for replacement or failure – before purchasing, please read the variant description, as the engine controller is available in a locked or unlocked version.
What does number 0281012858 mean in the Alfa Romeo 147 1.9 JTDM engine control unit?
The number 0281012858 identifies a specific engine control unit used in the Alfa Romeo 147 with the 1.9 JTDM engine. This designation allows precise matching of the module to the correct vehicle version.
Does engine control unit 55204755 fit every 1.9 JTDM version?
ECU 55204755 was installed in specific 1.9 JTDM engine configurations. To confirm compatibility, compare the number with the marking on the original module.
Why does the marking 4D34A3ABM also appear?
The number 4D34A3ABM is an additional software version identifier. Together with 0281012858 and 55204755, it allows accurate identification of the correct module for Alfa Romeo 147.
What is the function of engine computer 0281012858 in the 147 1.9 JTDM?
ECU 0281012858 manages engine operating parameters, including fuel injection and other settings affecting performance and smooth engine operation.
What symptoms may indicate a fault in module 55204755?
Rough engine operation, power loss, starting problems or error messages may indicate a malfunction of ECU 55204755.
Why is the exact number 1039S12192 important when purchasing?
The marking 1039S12192 identifies a specific ECU version. Even if modules look similar, differences in numbers may indicate different configurations, so exact matching is crucial.
Does ECU 0281012858 require programming after installation?
In many cases, ECU 0281012858 may require coding or adaptation after installation. It is recommended to verify this before fitting.
How can I check compatibility of ECU 55204755 with my Alfa Romeo 147 1.9 JTDM?
The best method is to compare all markings – 0281012858, 55204755, 4D34A3ABM and 1039S12192 – with the numbers on your original module.
Why search for the part by number 0281012858 or 55204755?
Entering the exact number 0281012858 or 55204755 allows you to quickly find the correct engine control unit for Alfa Romeo 147 1.9 JTDM. It is the most precise selection method.
What should you check before ordering ECU 4D34A3ABM?
Before purchase, ensure that 0281012858, 55204755, 4D34A3ABM and 1039S12192 fully match your module markings. Number consistency guarantees proper installation and engine operation.
