A properly functioning ABS system is the foundation of road safety. Its main task is to prevent wheel lock-up during emergency braking, which allows the driver to maintain full control of the vehicle. The heart of this system is the electronic ABS pump controller. When it fails, the system stops working. A proper diagnosis of the problem allows you to avoid unnecessary costs and quickly restore brake efficiency.
Engine control module Audi 0281017372 03L906018JP EDC17C46
Vendors's code:
Product code: F822-86636
Barcode:
Code 39:
ISBN:
€162.60
Price
€162.60
Regular price:
€162.60
0%
€200.00
Price
€200.00
Regular price:
€200.00
0%
In stock
Select a product option:
Individual variants may differ in price
product option
Important: Depending on the ECU type and vehicle model, not all of the options listed below may be available.
To select the correct option for your vehicle and ECU, please contact us before purchasing:
contact@auto24parts.com
1. Locked
This option is intended for professional workshops with the required specialist equipment and technical knowledge.
The ECU has been removed from a vehicle intended for recycling and still contains the immobilizer data and other information from the previous vehicle. Before it can be used in another car, it must be unlocked and then programmed using specialist automotive diagnostic equipment.
2. Unlocked
Several preparation methods may be available. The possible options depend on the ECU type, vehicle model and immobilizer system. Please contact us before purchasing, as some preparation methods are not available for every ECU.
Our electronics specialists can prepare the ECU in one of the following ways:
a) ECU with PIN code (Car Pass)
The PIN code is supplied, but programming with a suitable diagnostic tool is still required. After installing the ECU, it must be reset using the supplied PIN code and then programmed to the vehicle’s immobilizer system.
b) VIRGIN ECU
The data from the previous vehicle is removed and the ECU is restored to a clean, factory-like state. After installation, it must be programmed to the vehicle using a compatible specialist diagnostic tool. Unless another preparation method is specified in the product description, this is the standard unlocking option for most of our ECUs.
c) Plug & Play – IMMO OFF
The immobilizer function is disabled in the ECU. After installation, the engine can start without additional immobilizer programming. Please note that the vehicle will no longer have an active immobilizer function, and an immobilizer warning light or fault code may remain, depending on the vehicle model.
d) Plug & Play – Automatic Programming
After installation, the ECU automatically learns and saves the required vehicle data. No additional programming is normally required.
e) Plug & Play – 1:1 Clone
The data from your original ECU is copied to another fully functional ECU. The cloned unit is then ready for installation without additional programming.
You must send us your original ECU so that we can transfer its data to the replacement unit.
The original ECU must have working communication with the vehicle, a diagnostic tool or our programming equipment. If the required data cannot be read, a complete 1:1 clone may not be possible.
3. Complete Plug & Play Set
A complete matched set containing the ECU, immobilizer components and all other parts required to start the vehicle without additional programming. All components supplied in the set must be installed in the vehicle.
Important:
Dispatch time depends on the selected option. If an unlocked or specially prepared version is ordered, the preparation service usually requires an additional 1–2 business days.
Ask about the product
Engine control module Audi 0281017372 03L906018JP EDC17C46
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
€30.00
-
shipping
(Poland)
from
€30.00
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Engine control unit Audi 0281017372 03L906018JP EDC17C46
The engine control unit with numbers 0281017372 and 03L906018JP EDC17C46 for Audi is a tested part responsible for engine operation, available in a locked or unlocked version.
Does the 0281017372 engine control unit fit Audi?
The engine control unit with number 0281017372 and designation 03L906018JP EDC17C46 is an original ECU used in Audi vehicles with 2.0 TDI engines, including Audi A4 B8 and Audi A5 2.0 TDI. Matching numbers indicate very high compatibility and easy replacement.
What does 03L906018JP mean?
The code 03L906018JP is the Audi/VW reference number which, together with Bosch 0281017372, identifies the exact engine control unit.
What does EDC17C46 mean?
EDC17C46 is a Bosch ECU type used in modern 2.0 TDI diesel engines, controlling fuel injection, turbocharger, emissions and engine operation.
Does the 0281017372 ECU require programming?
The 0281017372 / 03L906018JP ECU may come in locked, virgin or ready-to-install versions. Depending on the variant, immobilizer programming or ECU cloning may be required.
How to check compatibility 03L906018JP?
Compare 03L906018JP or 0281017372 with your current ECU. Matching numbers ensure correct fitment.
Why is 0281017372 important?
The Bosch number 0281017372 uniquely identifies the ECU version, ensuring correct selection for your Audi 2.0 TDI engine.
Is the EDC17C46 0281017372 ready to install?
It depends on the variant. Some units are plug & play, while others require adaptation or cloning in a workshop.
Symptoms of a faulty 0281017372 ECU
Typical issues include no communication, engine starting problems, limp mode, or injection/turbo control errors.
Does 03L906018JP appear under other numbers?
Yes — it is used together with Bosch 0281017372 and ECU type EDC17C46.
What to check before buying 0281017372?
Ensure number compatibility, check ECU condition and select the correct variant (locked or virgin).
