A used engine control unit will not usually start your car straight away, because its memory holds the immobiliser data of the car it came from. We explain how ECU programming, coding and cloning differ, and which preparation option to choose for your replacement ECU.
Engine control unit Chevrolet Matiz 0.8 5WY5404C 96417297
Vendors's code: 96417297
Product code: 5WY5404C
Barcode:
Code 39:
ISBN:
Select a product option:
Individual variants may differ in price
product option
Important: Depending on the ECU type and vehicle model, not all of the options listed below may be available.
To select the correct option for your vehicle and ECU, please contact us before purchasing:
contact@auto24parts.com
1. Locked
This option is intended for professional workshops with the required specialist equipment and technical knowledge.
The ECU has been removed from a vehicle intended for recycling and still contains the immobilizer data and other information from the previous vehicle. Before it can be used in another car, it must be unlocked and then programmed using specialist automotive diagnostic equipment.
2. Unlocked
Several preparation methods may be available. The possible options depend on the ECU type, vehicle model and immobilizer system. Please contact us before purchasing, as some preparation methods are not available for every ECU.
Our electronics specialists can prepare the ECU in one of the following ways:
a) ECU with PIN code (Car Pass)
The PIN code is supplied, but programming with a suitable diagnostic tool is still required. After installing the ECU, it must be reset using the supplied PIN code and then programmed to the vehicle’s immobilizer system.
b) VIRGIN ECU
The data from the previous vehicle is removed and the ECU is restored to a clean, factory-like state. After installation, it must be programmed to the vehicle using a compatible specialist diagnostic tool. Unless another preparation method is specified in the product description, this is the standard unlocking option for most of our ECUs.
c) Plug & Play – IMMO OFF
The immobilizer function is disabled in the ECU. After installation, the engine can start without additional immobilizer programming. Please note that the vehicle will no longer have an active immobilizer function, and an immobilizer warning light or fault code may remain, depending on the vehicle model.
d) Plug & Play – Automatic Programming
After installation, the ECU automatically learns and saves the required vehicle data. No additional programming is normally required.
e) Plug & Play – 1:1 Clone
The data from your original ECU is copied to another fully functional ECU. The cloned unit is then ready for installation without additional programming.
You must send us your original ECU so that we can transfer its data to the replacement unit.
The original ECU must have working communication with the vehicle, a diagnostic tool or our programming equipment. If the required data cannot be read, a complete 1:1 clone may not be possible.
3. Complete Plug & Play Set
A complete matched set containing the ECU, immobilizer components and all other parts required to start the vehicle without additional programming. All components supplied in the set must be installed in the vehicle.
Important:
Dispatch time depends on the selected option. If an unlocked or specially prepared version is ordered, the preparation service usually requires an additional 1–2 business days.
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Control unit number 5WY5404C - is this the right part?
This listing is for a used engine control unit in working order for the Chevrolet Matiz - numbers 5WY5404C; 96417297. It is worth confirming the fit using the numbers on the label.
Engine control unit for Chevrolet Matiz
Looking for a replacement for the faulty engine control unit in your Chevrolet Matiz 0.8? We offer a used module in working order and in good condition.
Part numbers in this listing
- 5WY5404C - OEM / vehicle number
- 96417297 - OEM / vehicle number
Car and engine according to the listing
- Chevrolet Matiz - model
- 0.8 - engine according to the listing
The role of the control unit in the engine
An engine control unit works in harsh conditions: changing temperatures, moisture and vibration. That is why it is worth checking the condition of the housing and connectors before buying. After replacement, the module usually has to be matched to the car, and in some cars it also needs coding or adaptation.
Locked or unlocked variant?
If you program control units yourself, you can choose the locked variant: it still holds the previous car's data and immobiliser coding, and you carry out the unlocking and matching yourself. We prepare an unlocked control unit before dispatch, which usually takes about 1-2 working days. Not all unlocking methods - PIN / CAR PASS, Virgin, IMMO OFF, auto-programming or cloning - are available for every number, as a lot depends on the software and the immobiliser. You can also read our guide to engine control unit variants or ask us about your particular case.
Fitment
Compare number 5WY5404C in full with the number on your control unit. Different versions were fitted to the same models, so it is the number that decides the match, not the model alone. An incompatible version of the control unit may not work with the injectors or sensors, so we do not assume that different listings are interchangeable.
How to recognise a faulty control unit
- the engine only runs intermittently,
- the control unit gets hot or resets,
- injector faults appear,
- the diagnostic tool cannot detect the module.
Before buying, make sure the cause is not the power supply or the wiring loom, and only then replace the module.
Frequently asked questions
| What condition is this part in? |
|---|
| It is a used part, in working order and in good condition. You will find the warranty period in the product features table. |
| Which number matters most when matching? |
| It is best to compare all the numbers on the module, above all the one marked as the manufacturer's or OEM number. |
| How can I check whether the control unit will fit my car? |
| Compare the model, year, engine and the numbers on the control unit fitted in your car with the numbers in the description. You can also send us a photo. |
Send a photo of your control unit or its number to contact@auto24parts.com and we will confirm whether this part will fit.