The engine control unit (often referred to as ECU or ECM) is the most important electronic module in every modern vehicle. It acts as the main computer managing the operation of the power unit, analyzing signals from numerous sensors in real-time. It is responsible for precise fuel dosing, ignition timing, boost pressure, and the operation of exhaust gas treatment systems. When this crucial component fails, normal operation of the car becomes impossible. When faced with electronic problems, many drivers consider complicated diagnostics, circuit testing, and attempting to repair integrated circuits. In practice, the fastest, safest, and most cost-effective solution is to replace the damaged component with a fully functional, original used part from the aftermarket.
ECU Engine controller OPEL 12230554 DTWH HSFI 2.5
Vendors's code: 12230554
Product code: E23F-29733
Barcode:
Code 39:
ISBN:
€325.20
Price
€325.20
Regular price:
€325.20
0%
€400.00
Price
€400.00
Regular price:
€400.00
0%
Wybierz wariant produktu:
Individual variants may differ in price
Warranty
Attention : Depending on the type of engine controller and car model, not every variant from the list below is available.
To choose the correct variant for your car and model engine controller please contact with us :
1.Locked: This variant is intended for workshops that have specialized equipment and knowledge.
Engine computer removed from a car intended for recycling with data saved from the previous car and immobilizer. To use this controller it is required to unlock it and then perform the programming procedure. For this purpose, it is necessary to use specialized diagnostic equipment for electronics.
2.Unlocked: There are many variants of the possible unlock device , so please contact us before purchasing because, depending on the type and model of the car or controller itself make some unlocking options not possible.
The controller can be prepared for assembly by our electronics in various ways: the list below
a) ECU with read PIN code (CAR PASS) - Required programming by diagnostic device. After the assmbly of the ecu to the car you need to reset that controller by typing in the pin code, and then performing the procedure of programming the immobilizer to your car
b) Cleaned Ecu out of the data of the previus car (VIRGIN). The ECU is reset to factory settings, prepared as clean. After installation in the car, it requires programming by using a specialized diagnostic device (STANDARD Unlocking of most of our ECUs if not specified the unlocking form)
c)Plug & Play (IMMO OFF) - excluded immobilizer, it has removed the safety codes from the ecu. Once its connected ecu to the car the engine runs and it does not require any programming, but it does not have the immobilizer function. - No need additional programming
d) Plug & Play (AUTO PROGRAMMING) - after assembly the ecu in the car, ECU will automatically program itself to your car. Does not require any programming
e) Plug & Play (CLON) - a cloned controller prepared for installation in a car without the need for programming. This device is copied 1 to 1 from the old device and the data is transferred to another properly working computer by our electrician service technician
Have to send us the damaged driver from which the data will be transferred to another, properly working computer.
Broken ecu HAS to have working communication with the car or diagnostic device , without proper communication Security code cant be cloned.
3.Complete: Plug & Play complete set ecu with immobilizer and all elements needed to start the vehicle without need for additional programming. Have to replace all the elements sent by us in your car.
Attention :
Delivery time depends on the selected variant: if the unlocked version is selected,
the unlocking service takes an additional time of around 1-2 business days
Ask about the product
ECU Engine controller OPEL 12230554 DTWH HSFI 2.5
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
€30.00
-
shipping
(Poland)
from
€30.00
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
ENGINE CONTROL UNIT OPEL 12230554 DTWH HSFI 2.5
Original Opel engine control unit with part number 12230554 DTWH HSFI 2.5, designed for quick and accurate vehicle compatibility matching.
Engine Control Unit OPEL 12230554 DTWH HSFI 2.5
Which Opel models use the 12230554 DTWH engine ECU?
The OPEL 12230554 DTWH HSFI 2.5 engine control module was installed in selected Opel models equipped with petrol engines. The unit is responsible for proper engine operation and communication with the vehicle’s electronic systems during everyday driving.
The 12230554 ECU is commonly found in models such as Opel Astra and Opel Vectra equipped with HSFI 2.5 petrol engines.
What is the function of the Opel DTWH HSFI 2.5 engine control module?
The Opel DTWH HSFI 2.5 engine ECU manages the main engine operating parameters. It controls fuel injection, processes sensor data and communicates with other vehicle modules.
The Opel 12230554 control unit helps maintain stable engine performance and smooth driving both in city traffic and on longer journeys.
What symptoms can a faulty Opel 12230554 ECU cause?
A damaged Opel 12230554 engine control unit may cause starting problems, unstable engine operation or loss of power while driving. In some cases, diagnostic communication errors may also appear.
The DTWH HSFI 2.5 ECU is tested before shipping, ensuring the customer receives a verified product with warranty and fast delivery.
Why is the 12230554 part number important when choosing an Opel ECU?
The 12230554 part number helps identify the correct engine control module for a specific Opel version. Even visually similar units may contain different software or technical configurations.
Before purchasing the Opel DTWH ECU, it is recommended to carefully compare all markings with the original module installed in the vehicle.
Can the OPEL 12230554 HSFI 2.5 ECU require programming?
Depending on the vehicle model, the OPEL 12230554 DTWH HSFI 2.5 engine control module may require programming or adaptation after installation. This mainly applies to ECUs connected to the immobilizer system.
Matching the correct part numbers significantly simplifies installation and helps ensure proper vehicle operation after replacing the ECU.
