A used engine control unit will not usually start your car straight away, because its memory holds the immobiliser data of the car it came from. We explain how ECU programming, coding and cloning differ, and which preparation option to choose for your replacement ECU.
Engine control unit Jaguar X-Type 2.5 V6 1X4310K975AR
Vendors's code: 1X4310K975AR
Product code: 669F-39401
Barcode:
Code 39:
ISBN:
Select a product option:
Individual variants may differ in price
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Control unit number 1X4310K975AR - is this the right part?
A used engine control unit in working order and in good condition for the Jaguar X-Type - numbers 1X43-10K975-AR / 1X4310K975AR. The numbers are listed below, and if you have any questions about the fit, write to us.
Engine control unit for Jaguar X-Type
A used engine control unit lets you carry out the repair without buying a new, expensive part. This listing is for the Jaguar X-Type 2.5 V6, and this unit is in working order and in good condition.
Part numbers in this listing
- 1X43-10K975-AR / 1X4310K975AR - OEM / vehicle number
Car and engine according to the listing
- Jaguar X-Type - model
- 2.5 V6 - engine according to the listing
Locked and unlocked variants
In the locked variant, the control unit still holds the security coding and data of the car it came from, so it needs to be unlocked and programmed. We prepare an unlocked control unit before dispatch, which usually takes about 1-2 working days. Not every unlocking method (PIN / CAR PASS, Virgin, IMMO OFF, auto-programming, cloning) is available for every control unit - it depends on the number, software and immobiliser. If in doubt, ask us before ordering. Read about the variants: locked and unlocked explained.
What an engine control unit does
An engine control unit works in harsh conditions: changing temperatures, moisture and vibration. That is why it is worth checking the condition of the housing and connectors before buying. Before buying, it is also worth knowing that the control unit communicates with the car's other modules over the CAN bus, which is why version compatibility matters.
Fitment
Compare number 1X43-10K975-AR in full with the number on your control unit. Different versions were fitted to the same models, so it is the number that decides the match, not the model alone. If your control unit has a different number, write to us - we may have a version that suits your engine.
When the control unit needs replacing
- hard starting when the engine is cold,
- smoke from the exhaust and rough running,
- misfire faults stored in the diagnostic memory,
- no response to the accelerator pedal.
If the control unit has already been repaired or coded, mention this in your enquiry - it will make it easier to choose the right version.
Questions and answers
| Is the part new? |
|---|
| The control unit is used, but in working order. The warranty is stated in the product features. |
| Where can I find the number on the control unit? |
| You will usually find the numbers on the label or the housing of the module, visible once it has been removed from the car. If you cannot read them, send us a photo. |
| Could a control unit with a different number fit as well? |
| Sometimes, yes, but we do not assume that different listings are interchangeable. Compare all the numbers with the label on your control unit or ask us. |
If you have any questions about the application, email contact@auto24parts.com and quote the number from the label.