Skip to main content
English £
English £
Open search engine
Search
Close search engine Clear Search
Open search engine
Search
Close search engine Clear Search
English £
English £
Products in the cart: 0. See details
Open search engine
Search
Close search engine Clear Search

Engine control unit Jaguar XJ6 4.0 LNA7600AF MB1773002281

  • Part Type ECU Engine controller
  • Vehicle Make and Model Jaguar XJ6
  • Engine Type 4.0
  • OEM Part Number LNA7600AF
  • Part Number MB177300-2281 / MB1773002281
  • Part Number 177300-2281 / 1773002281
  • Configuration Variants Locked
  • Warranty 6-month warranty
  • Condition USED ORIGINAL IN GOOD CONDITION
  • Testing & Inspection Device thoroughly inspected and tested by a certified technician
Denso
with VAT without VAT
Price £75.73
Availability:
In stock

Select a product option:

Individual variants may differ in price

Select 1) LOCKED
pcs.

Fast Delivery

DHL Express - 30 euro

6 Month Warranty

Returns Possible up to 14 days

Secure payments

Stripe - Paypal - Credit Card
Ask about the product
Shipping from £22.72 - shipping (Poland)

Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price


PRODUCT DETAILS

  • Part Type ECU Engine controller
  • Vehicle Make and Model Jaguar XJ6
  • Engine Type 4.0
  • OEM Part Number LNA7600AF
  • Part Number MB177300-2281 / MB1773002281
  • Part Number 177300-2281 / 1773002281
  • Configuration Variants Locked
  • Warranty 6-month warranty
  • Condition USED ORIGINAL IN GOOD CONDITION
  • Testing & Inspection Device thoroughly inspected and tested by a certified technician

Will the control unit with number LNA7600AF fit your car?

A used engine control unit in working order and in good condition for the Jaguar XJ6 - numbers LNA7600AF; MB177300-2281 / MB1773002281. The numbers are listed below, and if you have any questions about the fit, write to us.

Go to full description

Engine control unit for Jaguar XJ6

When the engine in a Jaguar XJ6 4.0 runs unevenly or will not start, and diagnostics point to the control unit, replacing it with a used module in working order can be the cheapest solution. This unit is in good condition.

Part numbers in this listing

  • LNA7600AF - part number (OEM / vehicle)
  • MB177300-2281 / MB1773002281 - additional part number
  • 177300-2281 / 1773002281 - additional part number

According to the listing data: Jaguar XJ6 (model), 4.0 (engine).

Locked control unit

We offer this control unit in the locked variant only - an unlocked variant cannot be selected in this listing; if you would like us to prepare it, ask us before buying. A locked control unit keeps the previous car's data and immobiliser coding, so it is intended for garages that will unlock, program and match it to the vehicle themselves. Not every unlocking method (PIN / CAR PASS, Virgin, IMMO OFF, auto-programming, cloning) is available for every control unit - it depends on the number, software and immobiliser. Before buying, send us the number of your control unit. More details: what locked and unlocked mean for an engine control unit.

How an engine control unit works

Control unit damage can result from water ingress, a voltage surge or wear of the electronic components. The symptoms may be constant or appear intermittently. Some engines have several software versions, so the part number alone is not always enough for a definitive match.

Matching by number

Compare number LNA7600AF in full with the number on your control unit. Different versions were fitted to the same models, so it is the number that decides the match, not the model alone. The numbers given come from our listing; always compare them with the markings on your control unit.

Symptoms of a faulty control unit

  • an engine fault appears after the battery has been replaced,
  • the control unit's supply voltage is unstable,
  • power drops once the car has warmed up,
  • the engine goes into limp mode for no obvious reason.

Compare all the numbers with the label on your control unit, as the same engine may have been fitted with several versions of the module.

Frequently asked questions

Is the part new?
The control unit is used, but in working order. The warranty is stated in the product features.
Could a control unit with a different number fit as well?
Sometimes, yes, but we do not assume that different listings are interchangeable. Compare all the numbers with the label on your control unit or ask us.

Unsure? Send a photo of your control unit to contact@auto24parts.com and we will check it for you.

  • How to Check the Operation of a Transmission Control Module - Symptoms

    A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.

    Read more
  • Burned Engine Control Unit: Symptoms, Causes, and the Optimal Solution

    A burned engine control unit (ECU) usually causes a sudden no-start: the engine cranks but will not start, the diagnostic tool cannot connect to the ECU, and the engine management light does not come on when you switch on the ignition. The most common causes are a voltage spike when jump-starting, reversed battery polarity, a faulty voltage regulator and a short circuit in the wiring loom or in an actuator. Below we explain how to tell a burned ECU from a power supply fault, what causes this kind of failure and how to choose a replacement ECU.

    Read more
  • Flooded Automatic Transmission Control Module or Burnt TCM - Symptoms

    A burnt-out or flooded automatic transmission control module (TCM) usually causes sudden symptoms: limp mode with the gearbox stuck in one gear, harsh thumps when you select D or R, no response to the gear selector, flashing or blank PRND letters and no communication between the diagnostic tool and the gearbox control unit. Flooding is most often caused by blocked scuttle panel drains, washing the engine bay or coolant in the gearbox oil, and a burnout by overheating, a short circuit or a voltage spike. Below we explain the symptoms, what to do straight away and why drying out or repairing such a control unit rarely gives a lasting result.

    Read more
  • Flooded engine control unit - symptoms, consequences and what to do

    A flooded engine control unit (ECU) most often causes a no-start, a 'Christmas tree' of warning lights on the dashboard, no communication with the diagnostic tool, or rough running in limp mode. Water usually gets into the ECU from blocked scuttle drains, after the engine bay has been cleaned with a pressure washer, or after driving through deep water. Below we describe the symptoms of a water-damaged ECU, what to do straight after the ECU gets wet, and why drying or repairing it rarely gives lasting results.

    Read more