A properly functioning ABS system is the foundation of road safety. Its main task is to prevent wheel lock-up during emergency braking, which allows the driver to maintain full control of the vehicle. The heart of this system is the electronic ABS pump controller. When it fails, the system stops working. A proper diagnosis of the problem allows you to avoid unnecessary costs and quickly restore brake efficiency.
Engine Control Unit Opel Chevrolet 2.0 VCDI Bosch 0281015176 96892357
Vendors's code: 96892357
Product code: 0281015176
Barcode:
Code 39:
ISBN:
Select a product option:
Individual variants may differ in price
product option
Important: Depending on the ECU type and vehicle model, not all of the options listed below may be available.
To select the correct option for your vehicle and ECU, please contact us before purchasing:
contact@auto24parts.com
1. Locked
This option is intended for professional workshops with the required specialist equipment and technical knowledge.
The ECU has been removed from a vehicle intended for recycling and still contains the immobilizer data and other information from the previous vehicle. Before it can be used in another car, it must be unlocked and then programmed using specialist automotive diagnostic equipment.
2. Unlocked
Several preparation methods may be available. The possible options depend on the ECU type, vehicle model and immobilizer system. Please contact us before purchasing, as some preparation methods are not available for every ECU.
Our electronics specialists can prepare the ECU in one of the following ways:
a) ECU with PIN code (Car Pass)
The PIN code is supplied, but programming with a suitable diagnostic tool is still required. After installing the ECU, it must be reset using the supplied PIN code and then programmed to the vehicle’s immobilizer system.
b) VIRGIN ECU
The data from the previous vehicle is removed and the ECU is restored to a clean, factory-like state. After installation, it must be programmed to the vehicle using a compatible specialist diagnostic tool. Unless another preparation method is specified in the product description, this is the standard unlocking option for most of our ECUs.
c) Plug & Play – IMMO OFF
The immobilizer function is disabled in the ECU. After installation, the engine can start without additional immobilizer programming. Please note that the vehicle will no longer have an active immobilizer function, and an immobilizer warning light or fault code may remain, depending on the vehicle model.
d) Plug & Play – Automatic Programming
After installation, the ECU automatically learns and saves the required vehicle data. No additional programming is normally required.
e) Plug & Play – 1:1 Clone
The data from your original ECU is copied to another fully functional ECU. The cloned unit is then ready for installation without additional programming.
You must send us your original ECU so that we can transfer its data to the replacement unit.
The original ECU must have working communication with the vehicle, a diagnostic tool or our programming equipment. If the required data cannot be read, a complete 1:1 clone may not be possible.
3. Complete Plug & Play Set
A complete matched set containing the ECU, immobilizer components and all other parts required to start the vehicle without additional programming. All components supplied in the set must be installed in the vehicle.
Important:
Dispatch time depends on the selected option. If an unlocked or specially prepared version is ordered, the preparation service usually requires an additional 1–2 business days.
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
ECU for Opel and Chevrolet 2.0 VCDI
Looking for an engine control unit for Opel or Chevrolet with a 2.0 VCDI engine? Check if the numbers 0281015176 and 96892357 are present on your module.
This is a verified part offering a 6-month warranty. Take advantage of fast shipping and order from Auto24Parts now.
Opel Chevrolet 2.0 VCDI Engine Control Unit – 0281015176
This engine control unit is designed for Opel and Chevrolet vehicles with a 2.0 VCDI engine. It is crucial to compare the identification numbers with your original module.
The unit bears the markings: 0281015176, 96892357. Ensure these numbers match your existing unit to guarantee full compatibility.
How to verify ECU compatibility
Before purchasing, compare the OEM number and Bosch marking with your ECU's label. The vehicle model and engine type alone may not be sufficient for compatibility confirmation.
Programming or immobilizer matching may be required after installation. Consult with a workshop for details.
Product condition and warranty
This is a used, original part that has been thoroughly tested. The product comes with a 6-month warranty. Auto24Parts offers fast shipping.
FAQ – Questions and Answers
Does the 0281015176 ECU fit every Opel and Chevrolet 2.0 VCDI?
No, compatibility should be confirmed by comparing numbers 0281015176 and 96892357 with your ECU.
What does the Bosch number 0281015176 mean?
This is the Bosch identification number for the ECU. It should be verified along with the OEM number 96892357 before purchase.
Does a used ECU require programming?
Depending on the vehicle configuration, programming or immobilizer matching may be necessary. Consult with a workshop.
What if the numbers on my ECU are different?
Do not rely on the appearance of the part. Send a photo of the label and numbers to the seller to confirm compatibility.