A properly functioning ABS system is the foundation of road safety. Its main task is to prevent wheel lock-up during emergency braking, which allows the driver to maintain full control of the vehicle. The heart of this system is the electronic ABS pump controller. When it fails, the system stops working. A proper diagnosis of the problem allows you to avoid unnecessary costs and quickly restore brake efficiency.
Engine Control Unit Seat Leon Skoda Octavia 1.8 T Bosch 06A906032SJ 0261208531
Vendors's code: 06A906032SJ
Product code: 06A906032SJ
Barcode:
Code 39:
ISBN:
€406.50
Price
€406.50
€500.00
Price
€500.00
Select a product option:
Individual variants may differ in price
product option
Important: Depending on the ECU type and vehicle model, not all of the options listed below may be available.
To select the correct option for your vehicle and ECU, please contact us before purchasing:
contact@auto24parts.com
1. Locked
This option is intended for professional workshops with the required specialist equipment and technical knowledge.
The ECU has been removed from a vehicle intended for recycling and still contains the immobilizer data and other information from the previous vehicle. Before it can be used in another car, it must be unlocked and then programmed using specialist automotive diagnostic equipment.
2. Unlocked
Several preparation methods may be available. The possible options depend on the ECU type, vehicle model and immobilizer system. Please contact us before purchasing, as some preparation methods are not available for every ECU.
Our electronics specialists can prepare the ECU in one of the following ways:
a) ECU with PIN code (Car Pass)
The PIN code is supplied, but programming with a suitable diagnostic tool is still required. After installing the ECU, it must be reset using the supplied PIN code and then programmed to the vehicle’s immobilizer system.
b) VIRGIN ECU
The data from the previous vehicle is removed and the ECU is restored to a clean, factory-like state. After installation, it must be programmed to the vehicle using a compatible specialist diagnostic tool. Unless another preparation method is specified in the product description, this is the standard unlocking option for most of our ECUs.
c) Plug & Play – IMMO OFF
The immobilizer function is disabled in the ECU. After installation, the engine can start without additional immobilizer programming. Please note that the vehicle will no longer have an active immobilizer function, and an immobilizer warning light or fault code may remain, depending on the vehicle model.
d) Plug & Play – Automatic Programming
After installation, the ECU automatically learns and saves the required vehicle data. No additional programming is normally required.
e) Plug & Play – 1:1 Clone
The data from your original ECU is copied to another fully functional ECU. The cloned unit is then ready for installation without additional programming.
You must send us your original ECU so that we can transfer its data to the replacement unit.
The original ECU must have working communication with the vehicle, a diagnostic tool or our programming equipment. If the required data cannot be read, a complete 1:1 clone may not be possible.
3. Complete Plug & Play Set
A complete matched set containing the ECU, immobilizer components and all other parts required to start the vehicle without additional programming. All components supplied in the set must be installed in the vehicle.
Important:
Dispatch time depends on the selected option. If an unlocked or specially prepared version is ordered, the preparation service usually requires an additional 1–2 business days.
Ask about the product
Engine Control Unit Seat Leon Skoda Octavia 1.8 T Bosch 06A906032SJ 0261208531
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
€30.00
-
shipping
(Poland)
from
€30.00
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
ECU for Seat Leon and Skoda Octavia 1.8 T
Looking for an ECU for your Seat Leon or Skoda Octavia with a 1.8 T engine? Ensure that the OEM numbers 06A906032SJ and Bosch 0261208531 match your old unit.
This verified part comes with a 6-month warranty. Fast shipping guaranteed. Order now at Auto24Parts!
Engine Control Unit for Seat Leon and Skoda Octavia 1.8 T
This ECU is designed for Seat Leon and Skoda Octavia models with a 1.8 T engine. To ensure full compatibility, compare the numbers on your existing ECU's label.
This module features the following identifiers: 06A906032SJ, 06A 906 032 SJ, BOSCH 0261208531, 0 261 208 531, BENZIN ME7.5. Use these numbers to find the correct part.
How to confirm ECU compatibility?
Before purchasing, make sure the OEM numbers and manufacturer identifiers match your old unit. Car model and engine size alone may not confirm compatibility.
After installation, programming or immobilizer adaptation may be required. Consult a workshop to determine necessary steps.
Warranty and product condition
The offered ECU is an original, used part that has been thoroughly tested. It comes with a 6-month warranty. Auto24Parts ensures fast delivery.
FAQ – Frequently Asked Questions
Does the 06A906032SJ ECU fit all Seat Leon and Skoda Octavia 1.8 T models?
No, compatibility should be confirmed by comparing numbers 06A906032SJ and 0261208531 along with the engine code.
What does the Bosch 0261208531 code mean?
This is the Bosch ECU identification number. It should be checked along with the OEM number 06A 906 032 SJ before purchase.
What is the significance of the BENZIN ME7.5 designation?
The BENZIN ME7.5 designation is an additional identifier. Check it along with other numbers on your module.
Do I need to program a used ECU?
Programming or immobilizer adaptation may be necessary depending on the car's configuration. Consult a workshop before installation.
What if the numbers are not identical?
Do not choose a part based solely on appearance. Send the seller a photo of the label and numbers to confirm compatibility.
