Skip to main content
English £
English £
Open search engine
Search
Close search engine Clear Search
Open search engine
Search
Close search engine Clear Search
English £
English £
Products in the cart: 0. See details
Open search engine
Search
Close search engine Clear Search

Engine control unit Skoda Octavia 1.6 TDI 5WP42688AA 03L906023LM

  • Part Type ECU Engine controller
  • Vehicle Make and Model Skoda Octavia
  • Engine Type 1.6 TDI
  • Manufacturer Continental
  • Manufacturer Part Number 5WP42688 AA / 5WP42688AA
  • OEM Part Number 03L 906 023 LM / 03L906023LM
  • Part Number 03L 906 023 LK / 03L906023LK
  • Part Number SIMOS PCR2.1
  • Configuration Variants Locked / Unlocked
  • Warranty 6-month warranty
  • Condition USED ORIGINAL IN GOOD CONDITION
  • Testing & Inspection Device thoroughly inspected and tested by a certified technician
Continental
with VAT without VAT
Price £187.92
Availability:
product-availability-module In stock

Select a product option:

Individual variants may differ in price

Select 1) LOCKED 2) UNLOCKED / READY FOR PROGRAMMING
pcs.

Fast Delivery

DHL Express - 30 euro

6 Month Warranty

Returns Possible up to 14 days

Secure payments

Stripe - Paypal - Credit Card
Ask about the product
Shipping from £22.55 - shipping (Poland)

Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price


PRODUCT DETAILS

  • Part Type ECU Engine controller
  • Vehicle Make and Model Skoda Octavia
  • Engine Type 1.6 TDI
  • Manufacturer Continental
  • Manufacturer Part Number 5WP42688 AA / 5WP42688AA
  • OEM Part Number 03L 906 023 LM / 03L906023LM
  • Part Number 03L 906 023 LK / 03L906023LK
  • Part Number SIMOS PCR2.1
  • Configuration Variants Locked / Unlocked
  • Warranty 6-month warranty
  • Condition USED ORIGINAL IN GOOD CONDITION
  • Testing & Inspection Device thoroughly inspected and tested by a certified technician

Does this engine control unit fit the Skoda Octavia?

Engine control unit for the Skoda Octavia - numbers 5WP42688 AA / 5WP42688AA; 03L 906 023 LM / 03L906023LM - a used part in working order and in good condition. Before buying, compare the numbers with the markings on your control unit.

Go to full description

Engine control unit for Skoda Octavia

A used engine control unit lets you carry out the repair without buying a new, expensive part. This listing is for the Skoda Octavia 1.6 TDI, and this unit is in working order and in good condition.

Part numbers in this listing

  • 5WP42688 AA / 5WP42688AA - manufacturer's number (Continental)
  • 03L 906 023 LM / 03L906023LM - vehicle part number
  • 03L 906 023 LK / 03L906023LK - another part number
  • SIMOS PCR2.1 - control unit family / designation

Car and engine according to the listing

  • Skoda Octavia - model
  • 1.6 TDI - engine according to the listing
  • Continental - manufacturer

The role of the control unit in the engine

The same car model may have had several control unit versions, depending on the engine, power output and year. The numbers in the list let you tell these versions apart. The module stores fault codes which, once a diagnostic tool is connected, help to establish whether the sensors, the wiring or the control unit itself is to blame.

Locked or unlocked variant?

In the unlocked variant, we prepare the module before dispatch - this usually takes 1-2 working days. If you program control units yourself, you can choose the locked variant: it still holds the previous car's data and immobiliser coding, and you carry out the unlocking and matching yourself. The unlocking options depend on the number, software and immobiliser - not every method (PIN / CAR PASS, Virgin, IMMO OFF, auto-programming, cloning) works on every control unit. You can also read our guide to engine control unit variants or ask us about your particular case.

How to match this part

Our range also includes other control units for this model and engine, with different numbers. Choose by the number on the module, not by the model alone. Before buying, compare all the numbers with the label on your control unit, both with spaces and as a single string.

How to recognise a faulty control unit

  • hard starting when the engine is cold,
  • smoke from the exhaust and rough running,
  • injection system faults stored in the diagnostic memory,
  • no response to the accelerator pedal.

Before you buy a control unit, check the fuses, power supply, earth and sensors - a damaged wiring loom or crankshaft position sensor can also cause similar symptoms.

Frequently asked questions

Is the part new?
The control unit is used, but in working order. The warranty is stated in the product features.
Can I order an unlocked control unit?
Yes, you choose the variant in the listing. Whether an unlocking method is available depends on the number and software, so if in doubt, ask us before buying.
What is the difference between the locked and the unlocked variant?
A locked unit holds the previous car's data and immobiliser coding, while an unlocked one is prepared by us before dispatch. You will find a description on our ECU preparation options page.

If you have any questions about the application, email contact@auto24parts.com and quote the number from the label.

  • How to Check the Operation of a Transmission Control Module - Symptoms

    A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.

    Read more
  • Burned Engine Control Unit: Symptoms, Causes, and the Optimal Solution

    A burned engine control unit (ECU) usually causes a sudden no-start: the engine cranks but will not start, the diagnostic tool cannot connect to the ECU, and the engine management light does not come on when you switch on the ignition. The most common causes are a voltage spike when jump-starting, reversed battery polarity, a faulty voltage regulator and a short circuit in the wiring loom or in an actuator. Below we explain how to tell a burned ECU from a power supply fault, what causes this kind of failure and how to choose a replacement ECU.

    Read more
  • Flooded Automatic Transmission Control Module or Burnt TCM - Symptoms

    A burnt-out or flooded automatic transmission control module (TCM) usually causes sudden symptoms: limp mode with the gearbox stuck in one gear, harsh thumps when you select D or R, no response to the gear selector, flashing or blank PRND letters and no communication between the diagnostic tool and the gearbox control unit. Flooding is most often caused by blocked scuttle panel drains, washing the engine bay or coolant in the gearbox oil, and a burnout by overheating, a short circuit or a voltage spike. Below we explain the symptoms, what to do straight away and why drying out or repairing such a control unit rarely gives a lasting result.

    Read more
  • Flooded engine control unit - symptoms, consequences and what to do

    A flooded engine control unit (ECU) most often causes a no-start, a 'Christmas tree' of warning lights on the dashboard, no communication with the diagnostic tool, or rough running in limp mode. Water usually gets into the ECU from blocked scuttle drains, after the engine bay has been cleaned with a pressure washer, or after driving through deep water. Below we describe the symptoms of a water-damaged ECU, what to do straight after the ECU gets wet, and why drying or repairing it rarely gives lasting results.

    Read more