Skip to main content
English €
English €
Open search engine
Search
Close search engine Clear Search
Open search engine
Search
Close search engine Clear Search
English €
English €
Products in the cart: 0. See details
Open search engine
Search
Close search engine Clear Search

Engine control unit Suzuki Jimny 1.3 1220005932 3392081A110

  • Part Type ECU Engine controller
  • Vehicle Make and Model Suzuki Jimny
  • Engine Type 1.3
  • OEM Part Number 122000-5932 / 1220005932
  • Part Number 3392081A110
  • Part Number 1120005932
  • Configuration Variants Locked / Unlocked
  • Warranty 6-month warranty
  • Condition USED ORIGINAL IN GOOD CONDITION
  • Testing & Inspection Device thoroughly inspected and tested by a certified technician
Denso
with VAT without VAT
Price €300.00
Availability:
In stock

Select a product option:

Individual variants may differ in price

Select 1) LOCKED 2) UNLOCKED / READY FOR PROGRAMMING
pcs.

Fast Delivery

DHL Express - 30 euro

6 Month Warranty

Returns Possible up to 14 days

Secure payments

Stripe - Paypal - Credit Card
Ask about the product
Shipping from €30.00 - shipping (Poland)

Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price


PRODUCT DETAILS

  • Part Type ECU Engine controller
  • Vehicle Make and Model Suzuki Jimny
  • Engine Type 1.3
  • OEM Part Number 122000-5932 / 1220005932
  • Part Number 3392081A110
  • Part Number 1120005932
  • Configuration Variants Locked / Unlocked
  • Warranty 6-month warranty
  • Condition USED ORIGINAL IN GOOD CONDITION
  • Testing & Inspection Device thoroughly inspected and tested by a certified technician

Control unit number 1220005932 - is this the right part?

An engine control unit in working order for the Suzuki Jimny - numbers 122000-5932 / 1220005932; 3392081A110, a used part in good condition. The numbers on the label decide the match, so compare them with those on your own control unit.

Go to full description

Engine control unit for Suzuki Jimny

When the engine in a Suzuki Jimny 1.3 runs unevenly or will not start, and diagnostics point to the control unit, replacing it with a used module in working order can be the cheapest solution. This unit is in good condition.

Numbers to compare

  • 122000-5932 / 1220005932 - OEM / vehicle number
  • 3392081A110 - another number from the listing
  • 1120005932 - another number from the listing

According to the listing data: Suzuki Jimny (model), 1.3 (engine).

How an engine control unit works

Control unit damage can result from water ingress, a voltage surge or wear of the electronic components. The symptoms may be constant or appear intermittently. After replacement, the module usually has to be matched to the car, and in some cars it also needs coding or adaptation.

Locked or unlocked variant?

If you prefer a module that is already prepared, choose the unlocked variant - we prepare it before dispatch in about 1-2 working days. If you program control units yourself, you can choose the locked variant: it still holds the previous car's data and immobiliser coding, and you carry out the unlocking and matching yourself. Not every unlocking method (PIN / CAR PASS, Virgin, IMMO OFF, auto-programming, cloning) is available for every control unit - it depends on the number, software and immobiliser. See our ECU preparation options and contact us before buying.

Fitment

Compare number 122000-5932 in full with the number on your control unit. Different versions were fitted to the same models, so it is the number that decides the match, not the model alone. The same engine type was sometimes controlled by different module versions, so the number decides the match first, and only then the model and year.

How to recognise a faulty control unit

  • hard starting when the engine is cold,
  • smoke from the exhaust and rough running,
  • misfire faults stored in the diagnostic memory,
  • no response to the accelerator pedal.

Start by checking the fuses and connectors; replace the control unit only when the wiring and sensors are working properly.

Questions and answers

What does 'used, in working order' mean?
We sell it as a used part in working order and in good condition; the warranty period is given in the features of this listing.
Which number matters most when matching?
It is best to compare all the numbers on the module, above all the one marked as the manufacturer's or OEM number.
Why is the number written in several ways?
The same number may be written with spaces, with hyphens or as a single string. We give it in two forms to make it easier to find.

Unsure? Send a photo of your control unit to contact@auto24parts.com and we will check it for you.

  • How to Check the Operation of a Transmission Control Module - Symptoms

    A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.

    Read more
  • Burned Engine Control Unit: Symptoms, Causes, and the Optimal Solution

    A burned engine control unit (ECU) usually causes a sudden no-start: the engine cranks but will not start, the diagnostic tool cannot connect to the ECU, and the engine management light does not come on when you switch on the ignition. The most common causes are a voltage spike when jump-starting, reversed battery polarity, a faulty voltage regulator and a short circuit in the wiring loom or in an actuator. Below we explain how to tell a burned ECU from a power supply fault, what causes this kind of failure and how to choose a replacement ECU.

    Read more
  • Flooded Automatic Transmission Control Module or Burnt TCM - Symptoms

    A burnt-out or flooded automatic transmission control module (TCM) usually causes sudden symptoms: limp mode with the gearbox stuck in one gear, harsh thumps when you select D or R, no response to the gear selector, flashing or blank PRND letters and no communication between the diagnostic tool and the gearbox control unit. Flooding is most often caused by blocked scuttle panel drains, washing the engine bay or coolant in the gearbox oil, and a burnout by overheating, a short circuit or a voltage spike. Below we explain the symptoms, what to do straight away and why drying out or repairing such a control unit rarely gives a lasting result.

    Read more
  • Flooded engine control unit - symptoms, consequences and what to do

    A flooded engine control unit (ECU) most often causes a no-start, a 'Christmas tree' of warning lights on the dashboard, no communication with the diagnostic tool, or rough running in limp mode. Water usually gets into the ECU from blocked scuttle drains, after the engine bay has been cleaned with a pressure washer, or after driving through deep water. Below we describe the symptoms of a water-damaged ECU, what to do straight after the ECU gets wet, and why drying or repairing it rarely gives lasting results.

    Read more