Skip to main content
English £
English £
Open search engine
Search
Close search engine Clear Search
Open search engine
Search
Close search engine Clear Search
English £
English £
Products in the cart: 0. See details
Open search engine
Search
Close search engine Clear Search

Engine control unit Suzuki Jimny 1123000584 3392076JD1

  • Part Type ECU Engine controller
  • Vehicle Make and Model Suzuki Jimny
  • Manufacturer Denso
  • OEM Part Number 112300-0584 / 1123000584
  • Part Number 33920-76JD 1 / 3392076JD1
  • Configuration Variants Locked / Unlocked
  • Warranty 6-month warranty
  • Condition USED ORIGINAL IN GOOD CONDITION
  • Testing & Inspection Device thoroughly inspected and tested by a certified technician
Denso
with VAT without VAT
Price £302.94
Availability:
product-availability-module In stock

Select a product option:

Individual variants may differ in price

Select 1) LOCKED 2) UNLOCKED / READY FOR PROGRAMMING
pcs.

Fast Delivery

DHL Express - 30 euro

6 Month Warranty

Returns Possible up to 14 days

Secure payments

Stripe - Paypal - Credit Card
Ask about the product
Shipping from £22.72 - shipping (Poland)

Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price


PRODUCT DETAILS

  • Part Type ECU Engine controller
  • Vehicle Make and Model Suzuki Jimny
  • Manufacturer Denso
  • OEM Part Number 112300-0584 / 1123000584
  • Part Number 33920-76JD 1 / 3392076JD1
  • Configuration Variants Locked / Unlocked
  • Warranty 6-month warranty
  • Condition USED ORIGINAL IN GOOD CONDITION
  • Testing & Inspection Device thoroughly inspected and tested by a certified technician

Will the control unit with number 1123000584 fit your car?

This is a used engine control unit in working order for the Suzuki Jimny - numbers 112300-0584 / 1123000584; 33920-76JD 1 / 3392076JD1. Before buying, compare the numbers with the label on the module in your car.

Go to full description

Engine control unit for Suzuki Jimny

The engine control unit (ECU) collects data from the sensors and uses it to control fuel injection, ignition and engine operation. This listing is for the Suzuki Jimny. The part is used, in working order and in good condition.

How this control unit is labelled

  • 112300-0584 / 1123000584 - OEM / vehicle number
  • 33920-76JD 1 / 3392076JD1 - another number from the listing

Vehicle data from the listing

  • Suzuki Jimny - model
  • Denso - manufacturer

The role of the control unit in the engine

The module's electronics store fault codes that can be read with a diagnostic tool. They help to establish whether the sensors, the wiring or the control unit itself is to blame. Some engines have several software versions, so the part number alone is not always enough for a definitive match.

Matching by number

Our range also includes other control units for this model and engine, with different numbers. Choose by the number on the module, not by the model alone. If your control unit has a different number, write to us - we may have a version that suits your engine.

Symptoms of a faulty control unit

  • random faults appear after water ingress or exposure to moisture,
  • the radiator fan switches on for no reason,
  • charging failure or voltage errors,
  • the car stalls when coming to a stop.

Inspect the control unit connectors: corrosion or burnt contacts cause symptoms similar to faulty electronics.

Which variant should you choose: locked or unlocked?

The unlocked variant means that we prepare the module for you before dispatch; this usually takes approx. 1-2 working days. A locked control unit is sold with the previous vehicle's data - this is an option for workshops that can unlock and program it. Whether the chosen method (PIN / CAR PASS, Virgin, IMMO OFF, programming, cloning) can be used depends on the specific control unit number, its software and the immobiliser. You can also read our guide to engine control unit variants or ask us about your particular case.

Frequently asked questions

Is the part new?
The control unit is used, but in working order. The warranty is stated in the product features.
How can I check whether the control unit will fit my car?
Compare the model, year, engine and the numbers on the control unit fitted in your car with the numbers in the description. You can also send us a photo.
Could a control unit with a different number fit as well?
Sometimes, yes, but we do not assume that different listings are interchangeable. Compare all the numbers with the label on your control unit or ask us.

Write to contact@auto24parts.com with the model, year and the number from your control unit - we will check the fit.

  • How to Check the Operation of a Transmission Control Module - Symptoms

    A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.

    Read more
  • Burned Engine Control Unit: Symptoms, Causes, and the Optimal Solution

    A burned engine control unit (ECU) usually causes a sudden no-start: the engine cranks but will not start, the diagnostic tool cannot connect to the ECU, and the engine management light does not come on when you switch on the ignition. The most common causes are a voltage spike when jump-starting, reversed battery polarity, a faulty voltage regulator and a short circuit in the wiring loom or in an actuator. Below we explain how to tell a burned ECU from a power supply fault, what causes this kind of failure and how to choose a replacement ECU.

    Read more
  • Flooded Automatic Transmission Control Module or Burnt TCM - Symptoms

    A burnt-out or flooded automatic transmission control module (TCM) usually causes sudden symptoms: limp mode with the gearbox stuck in one gear, harsh thumps when you select D or R, no response to the gear selector, flashing or blank PRND letters and no communication between the diagnostic tool and the gearbox control unit. Flooding is most often caused by blocked scuttle panel drains, washing the engine bay or coolant in the gearbox oil, and a burnout by overheating, a short circuit or a voltage spike. Below we explain the symptoms, what to do straight away and why drying out or repairing such a control unit rarely gives a lasting result.

    Read more
  • Flooded engine control unit - symptoms, consequences and what to do

    A flooded engine control unit (ECU) most often causes a no-start, a 'Christmas tree' of warning lights on the dashboard, no communication with the diagnostic tool, or rough running in limp mode. Water usually gets into the ECU from blocked scuttle drains, after the engine bay has been cleaned with a pressure washer, or after driving through deep water. Below we describe the symptoms of a water-damaged ECU, what to do straight after the ECU gets wet, and why drying or repairing it rarely gives lasting results.

    Read more