Skip to main content
English $
English $
Open search engine
Search
Close search engine Clear Search
Open search engine
Search
Close search engine Clear Search
English $
English $
Products in the cart: 0. See details
Open search engine
Search
Close search engine Clear Search

Engine control unit Suzuki Swift 1.0 3392067E50 1120004410

  • Part Type ECU Engine controller
  • Vehicle Make and Model Suzuki Swift
  • Engine Type 1.0
  • OEM Part Number 33920-67E50 / 3392067E50
  • Part Number 112000-4410 / 1120004410
  • Configuration Variants Locked / Unlocked
  • Warranty 6-month warranty
  • Condition USED ORIGINAL IN GOOD CONDITION
  • Testing & Inspection Device thoroughly inspected and tested by a certified technician
Denso
with VAT without VAT
Price $99.56
Availability:
In stock

Select a product option:

Individual variants may differ in price

Select 1) LOCKED 2) UNLOCKED / READY FOR PROGRAMMING
pcs.

Fast Delivery

DHL Express - 30 euro

6 Month Warranty

Returns Possible up to 14 days

Secure payments

Stripe - Paypal - Credit Card
Ask about the product
Shipping from $29.87 - shipping (Poland)

Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price


PRODUCT DETAILS

  • Part Type ECU Engine controller
  • Vehicle Make and Model Suzuki Swift
  • Engine Type 1.0
  • OEM Part Number 33920-67E50 / 3392067E50
  • Part Number 112000-4410 / 1120004410
  • Configuration Variants Locked / Unlocked
  • Warranty 6-month warranty
  • Condition USED ORIGINAL IN GOOD CONDITION
  • Testing & Inspection Device thoroughly inspected and tested by a certified technician

Looking for an engine control unit for a Suzuki Swift?

We offer a used engine control unit for the Suzuki Swift - numbers 33920-67E50 / 3392067E50; 112000-4410 / 1120004410; it is in working order and in good condition. Check the numbers against your own module before ordering.

Go to full description

Engine control unit for Suzuki Swift

The engine control unit (ECU) collects data from the sensors and uses it to control fuel injection, ignition and engine operation. This listing is for the Suzuki Swift 1.0. The part is used, in working order and in good condition.

How this control unit is labelled

  • 33920-67E50 / 3392067E50 - part number (OEM / vehicle)
  • 112000-4410 / 1120004410 - part number (OEM / vehicle)

Vehicle data from the listing

  • Suzuki Swift - model
  • 1.0 - engine according to the listing

Which variant should you choose: locked or unlocked?

If you prefer a module that is already prepared, choose the unlocked variant - we prepare it before dispatch in about 1-2 working days. A locked control unit is sold with the previous vehicle's data - this is an option for workshops that can unlock and program it. The unlocking options depend on the number, software and immobiliser - not every method (PIN / CAR PASS, Virgin, IMMO OFF, auto-programming, cloning) works on every control unit. You can also read our guide to engine control unit variants or ask us about your particular case.

What an engine control unit does

Control unit damage can result from water ingress, a voltage surge or wear of the electronic components. The symptoms may be constant or appear intermittently.

How to match this part

We have several control units for this model in our range, with different numbers. It is the number on the label that counts, not the model name alone. If in doubt, send us the number from the label or a photo of the module and we will check the fit before you buy.

Symptoms of a faulty control unit

  • the engine will not start or cuts out,
  • the engine warning light (check engine) is on,
  • the control unit does not communicate with diagnostic equipment,
  • the car goes into limp mode.

Compare all the numbers with the label on your control unit, as the same engine may have been fitted with several versions of the module.

Frequently asked questions

Is the part new?
The control unit is used, but in working order. The warranty is stated in the product features.
Where can I find the number on the control unit?
You will usually find the numbers on the label or the housing of the module, visible once it has been removed from the car. If you cannot read them, send us a photo.
Can I order an unlocked control unit?
Yes, you choose the variant in the listing. Whether an unlocking method is available depends on the number and software, so if in doubt, ask us before buying.

Send a photo of your control unit or its number to contact@auto24parts.com and we will confirm whether this part will fit.

  • How to Check the Operation of a Transmission Control Module - Symptoms

    A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.

    Read more
  • Burned Engine Control Unit: Symptoms, Causes, and the Optimal Solution

    A burned engine control unit (ECU) usually causes a sudden no-start: the engine cranks but will not start, the diagnostic tool cannot connect to the ECU, and the engine management light does not come on when you switch on the ignition. The most common causes are a voltage spike when jump-starting, reversed battery polarity, a faulty voltage regulator and a short circuit in the wiring loom or in an actuator. Below we explain how to tell a burned ECU from a power supply fault, what causes this kind of failure and how to choose a replacement ECU.

    Read more
  • Flooded Automatic Transmission Control Module or Burnt TCM - Symptoms

    A burnt-out or flooded automatic transmission control module (TCM) usually causes sudden symptoms: limp mode with the gearbox stuck in one gear, harsh thumps when you select D or R, no response to the gear selector, flashing or blank PRND letters and no communication between the diagnostic tool and the gearbox control unit. Flooding is most often caused by blocked scuttle panel drains, washing the engine bay or coolant in the gearbox oil, and a burnout by overheating, a short circuit or a voltage spike. Below we explain the symptoms, what to do straight away and why drying out or repairing such a control unit rarely gives a lasting result.

    Read more
  • Flooded engine control unit - symptoms, consequences and what to do

    A flooded engine control unit (ECU) most often causes a no-start, a 'Christmas tree' of warning lights on the dashboard, no communication with the diagnostic tool, or rough running in limp mode. Water usually gets into the ECU from blocked scuttle drains, after the engine bay has been cleaned with a pressure washer, or after driving through deep water. Below we describe the symptoms of a water-damaged ECU, what to do straight after the ECU gets wet, and why drying or repairing it rarely gives lasting results.

    Read more