Skip to main content
English £
English £
Open search engine
Search
Close search engine Clear Search
Open search engine
Search
Close search engine Clear Search
English £
English £
Products in the cart: 0. See details
Open search engine
Search
Close search engine Clear Search

Engine control unit Suzuki Swift 1.3 1123008171 3392073KH

  • Part Type ECU Engine controller
  • Vehicle Make and Model Suzuki Swift
  • Engine Type 1.3
  • Manufacturer Denso
  • Manufacturer Part Number 112300-8171 / 1123008171
  • OEM Part Number 33920-73KH / 3392073KH
  • Configuration Variants Locked / Unlocked
  • Warranty 6-month warranty
  • Condition USED ORIGINAL IN GOOD CONDITION
  • Testing & Inspection Device thoroughly inspected and tested by a certified technician
Denso
with VAT without VAT
Price £113.60
Availability:
In stock

Select a product option:

Individual variants may differ in price

Select 1) LOCKED 2) UNLOCKED / READY FOR PROGRAMMING
pcs.

Fast Delivery

DHL Express - 30 euro

6 Month Warranty

Returns Possible up to 14 days

Secure payments

Stripe - Paypal - Credit Card
Ask about the product
Shipping from £22.72 - shipping (Poland)

Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price


PRODUCT DETAILS

  • Part Type ECU Engine controller
  • Vehicle Make and Model Suzuki Swift
  • Engine Type 1.3
  • Manufacturer Denso
  • Manufacturer Part Number 112300-8171 / 1123008171
  • OEM Part Number 33920-73KH / 3392073KH
  • Configuration Variants Locked / Unlocked
  • Warranty 6-month warranty
  • Condition USED ORIGINAL IN GOOD CONDITION
  • Testing & Inspection Device thoroughly inspected and tested by a certified technician

Suzuki Swift engine control unit - what should you check before buying?

A used engine control unit in working order and in good condition for the Suzuki Swift - numbers 112300-8171 / 1123008171; 33920-73KH / 3392073KH. The numbers are listed below, and if you have any questions about the fit, write to us.

Go to full description

Engine control unit for Suzuki Swift

The engine computer is one of the key modules in a car - it determines the amount of fuel, the ignition timing and how the engine runs both cold and hot. The unit on offer is for the Suzuki Swift 1.3; it is used, in working order and in good condition.

Numbers to compare

  • 112300-8171 / 1123008171 - manufacturer's number - Denso
  • 33920-73KH / 3392073KH - vehicle part number

According to the listing data: Suzuki Swift (model), 1.3 (engine), Denso (manufacturer).

Locked and unlocked variants

A locked control unit keeps the previous car's data and immobiliser coding, so it is intended for garages that will unlock, program and match it to the vehicle themselves. In the unlocked variant, we prepare the module before dispatch - this usually takes 1-2 working days. Whether the chosen method (PIN / CAR PASS, Virgin, IMMO OFF, programming, cloning) can be used depends on the specific control unit number, its software and the immobiliser. You will find details here: locked versus unlocked engine control units. We are also happy to answer any questions before you buy.

How an engine control unit works

The control unit communicates with the car's other modules over the CAN bus, including the ABS, the gearbox and the instrument cluster. That is why the software version and the hardware number matter when matching. Damage can result from water ingress, a voltage surge or wear of the electronic components, and it can show up intermittently.

How to match this part

Our range also includes other control units for this model and engine, with different numbers. Choose by the number on the module, not by the model alone. If in doubt, send us the number from the label or a photo of the module and we will check the fit before you buy.

Symptoms of a faulty control unit

  • the engine will not start or cuts out,
  • the engine warning light (check engine) is on,
  • the control unit does not communicate with diagnostic equipment,
  • the car goes into limp mode.

Before buying, make sure the cause is not the power supply or the wiring loom, and only then replace the module.

Frequently asked questions

What condition is this part in?
This is a used part in working order and in good condition. Warranty details are given in the features of this listing.
Can I order an unlocked control unit?
Yes, you choose the variant in the listing. Whether an unlocking method is available depends on the number and software, so if in doubt, ask us before buying.
What should I check on delivery?
Check that the numbers match the description and that the connectors and housing show no cracks or signs of corrosion.

If you have any questions about the application, email contact@auto24parts.com and quote the number from the label.

  • How to Check the Operation of a Transmission Control Module - Symptoms

    A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.

    Read more
  • Burned Engine Control Unit: Symptoms, Causes, and the Optimal Solution

    A burned engine control unit (ECU) usually causes a sudden no-start: the engine cranks but will not start, the diagnostic tool cannot connect to the ECU, and the engine management light does not come on when you switch on the ignition. The most common causes are a voltage spike when jump-starting, reversed battery polarity, a faulty voltage regulator and a short circuit in the wiring loom or in an actuator. Below we explain how to tell a burned ECU from a power supply fault, what causes this kind of failure and how to choose a replacement ECU.

    Read more
  • Flooded Automatic Transmission Control Module or Burnt TCM - Symptoms

    A burnt-out or flooded automatic transmission control module (TCM) usually causes sudden symptoms: limp mode with the gearbox stuck in one gear, harsh thumps when you select D or R, no response to the gear selector, flashing or blank PRND letters and no communication between the diagnostic tool and the gearbox control unit. Flooding is most often caused by blocked scuttle panel drains, washing the engine bay or coolant in the gearbox oil, and a burnout by overheating, a short circuit or a voltage spike. Below we explain the symptoms, what to do straight away and why drying out or repairing such a control unit rarely gives a lasting result.

    Read more
  • Flooded engine control unit - symptoms, consequences and what to do

    A flooded engine control unit (ECU) most often causes a no-start, a 'Christmas tree' of warning lights on the dashboard, no communication with the diagnostic tool, or rough running in limp mode. Water usually gets into the ECU from blocked scuttle drains, after the engine bay has been cleaned with a pressure washer, or after driving through deep water. Below we describe the symptoms of a water-damaged ECU, what to do straight after the ECU gets wet, and why drying or repairing it rarely gives lasting results.

    Read more