A used engine control unit will not usually start your car straight away, because its memory holds the immobiliser data of the car it came from. We explain how ECU programming, coding and cloning differ, and which preparation option to choose for your replacement ECU.
Engine control unit Suzuki Swift 1.5 3392062J3 MB1123000931
Vendors's code: 3392062J3
Product code: 5BBD-17629
Barcode:
Code 39:
ISBN:
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Will the control unit with number 3392062J3 fit your car?
For sale: a used engine control unit for the Suzuki Swift - numbers 33920-62J3 / 3392062J3; MB112300-0931 / MB1123000931, in working order and in good condition. Compare the numbers in the description with those in your car.
Engine control unit for Suzuki Swift
In the Suzuki Swift 1.5, the engine control unit is responsible for controlling fuel injection and the fuel supply system. We are selling a used module in working order and in good condition.
Numbers to compare
- 33920-62J3 / 3392062J3 - OEM / vehicle number
- MB112300-0931 / MB1123000931 - another number from the listing
According to the listing data: Suzuki Swift (model), 1.5 (engine).
How an engine control unit works
The control unit reads signals from the crankshaft position, temperature, pressure and airflow sensors, then calculates the fuel quantity and ignition timing. This allows the engine to run steadily in a range of conditions. The module stores fault codes which, once a diagnostic tool is connected, help to establish whether the sensors, the wiring or the control unit itself is to blame.
How to match this part
Compare number 33920-62J3 in full with the number on your control unit. Different versions were fitted to the same models, so it is the number that decides the match, not the model alone. Fitting is best left to a garage with suitable diagnostic equipment, as the module often needs coding and adaptation after replacement.
Locked control unit
In the locked variant, the control unit still holds the security coding and data of the car it came from, so it needs to be unlocked and programmed. We offer this control unit in the locked variant only - an unlocked variant cannot be selected in this listing; if you would like us to prepare it, ask us before buying. The available methods, such as PIN / CAR PASS, Virgin, IMMO OFF, auto-programming or cloning, vary depending on the number, software and immobiliser. Before buying, send us the number of your control unit. More details: what locked and unlocked mean for an engine control unit.
When the control unit needs replacing
- an engine fault appears after the battery has been replaced,
- the control unit's supply voltage is unstable,
- power drops once the car has warmed up,
- the engine goes into limp mode for no obvious reason.
If the control unit has already been repaired or coded, mention this in your enquiry - it will make it easier to choose the right version.
Questions and answers
| What condition is this part in? |
|---|
| This is a used part in working order and in good condition. Warranty details are given in the features of this listing. |
| What is the difference between the locked and the unlocked variant? |
| A locked unit holds the previous car's data and immobiliser coding, while an unlocked one is prepared by us before dispatch. This listing is for the locked variant only; you will find a description of both variants on our ECU preparation options page. |
| Do I need an immobiliser key for a locked control unit? |
| With a locked control unit, the unlocking and matching are done by a garage. What is required depends on the model, so ask us about your car. |
Write to contact@auto24parts.com with the model, year and the number from your control unit - we will check the fit.