A used engine control unit will not usually start your car straight away, because its memory holds the immobiliser data of the car it came from. We explain how ECU programming, coding and cloning differ, and which preparation option to choose for your replacement ECU.
Engine control unit Suzuki Vitara 1.3 MB1120004465 3392069E10
Vendors's code: MB1120004465
Product code: FDB9-56656
Barcode:
Code 39:
ISBN:
Select a product option:
Individual variants may differ in price
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Does this engine control unit fit the Suzuki Vitara?
For sale: a used engine control unit for the Suzuki Vitara - numbers MB112000-4465 / MB1120004465; 33920-69E10 / 3392069E10, in working order and in good condition. Compare the numbers in the description with those in your car.
Engine control unit for Suzuki Vitara
For the Suzuki Vitara 1.3, we offer a used engine control unit that you can match using the numbers in the list. It is in working order and in good condition.
Numbers to compare
- MB112000-4465 / MB1120004465 - vehicle part number
- 33920-69E10 / 3392069E10 - another part number
Application according to the listing
- Suzuki Vitara - model
- 1.3 - engine according to the listing
Locked or unlocked variant?
A locked control unit is sold with the previous vehicle's data - this is an option for workshops that can unlock and program it. If you prefer a module that is already prepared, choose the unlocked variant - we prepare it before dispatch in about 1-2 working days. Not all unlocking methods - PIN / CAR PASS, Virgin, IMMO OFF, auto-programming or cloning - are available for every number, as a lot depends on the software and the immobiliser. You can also read our guide to engine control unit variants or ask us about your particular case.
The role of the control unit in the engine
The module is linked to the immobiliser system, so after replacing it with a used unit you will usually need to match it to the car. We describe what this involves in the section on variants. Bear in mind that the control unit works in harsh conditions - vibration, moisture and changing temperatures - so the condition of the housing and connectors matters.
Matching by number
Compare number MB112000-4465 in full with the number on your control unit. Different versions were fitted to the same models, so it is the number that decides the match, not the model alone. Before buying, compare all the numbers with the label on your control unit, both with spaces and as a single string.
Symptoms of a faulty control unit
- hard starting when the engine is cold,
- smoke from the exhaust and rough running,
- misfire faults stored in the diagnostic memory,
- no response to the accelerator pedal.
Before you buy a control unit, check the fuses, power supply, earth and sensors - a damaged wiring loom or crankshaft position sensor can also cause similar symptoms.
Frequently asked questions
| Is the part new? |
|---|
| The control unit is used, but in working order. The warranty is stated in the product features. |
| Could a control unit with a different number fit as well? |
| Sometimes, yes, but we do not assume that different listings are interchangeable. Compare all the numbers with the label on your control unit or ask us. |
| Do you also sell wiring looms or other parts of the system? |
| This listing is for the control unit only. You will find additional components in other categories of our shop, or you can ask us about availability. |
Send questions about the fit to contact@auto24parts.com - include the model, year, engine and the number on the module.