A properly functioning ABS system is the foundation of road safety. Its main task is to prevent wheel lock-up during emergency braking, which allows the driver to maintain full control of the vehicle. The heart of this system is the electronic ABS pump controller. When it fails, the system stops working. A proper diagnosis of the problem allows you to avoid unnecessary costs and quickly restore brake efficiency.
ECU Engine controller Volkswagen Amarok 0281018005 03L906019FC EDC17CP20
Vendors's code:
Product code: 5450-27534
Barcode:
Code 39:
ISBN:
2 276,42 zł
Price
2 276,42 zł
2 800,00 zł
Price
2 800,00 zł
Select a product option:
Individual variants may differ in price
product option
Important: Depending on the ECU type and vehicle model, not all of the options listed below may be available.
To select the correct option for your vehicle and ECU, please contact us before purchasing:
contact@auto24parts.com
1. Locked
This option is intended for professional workshops with the required specialist equipment and technical knowledge.
The ECU has been removed from a vehicle intended for recycling and still contains the immobilizer data and other information from the previous vehicle. Before it can be used in another car, it must be unlocked and then programmed using specialist automotive diagnostic equipment.
2. Unlocked
Several preparation methods may be available. The possible options depend on the ECU type, vehicle model and immobilizer system. Please contact us before purchasing, as some preparation methods are not available for every ECU.
Our electronics specialists can prepare the ECU in one of the following ways:
a) ECU with PIN code (Car Pass)
The PIN code is supplied, but programming with a suitable diagnostic tool is still required. After installing the ECU, it must be reset using the supplied PIN code and then programmed to the vehicle’s immobilizer system.
b) VIRGIN ECU
The data from the previous vehicle is removed and the ECU is restored to a clean, factory-like state. After installation, it must be programmed to the vehicle using a compatible specialist diagnostic tool. Unless another preparation method is specified in the product description, this is the standard unlocking option for most of our ECUs.
c) Plug & Play – IMMO OFF
The immobilizer function is disabled in the ECU. After installation, the engine can start without additional immobilizer programming. Please note that the vehicle will no longer have an active immobilizer function, and an immobilizer warning light or fault code may remain, depending on the vehicle model.
d) Plug & Play – Automatic Programming
After installation, the ECU automatically learns and saves the required vehicle data. No additional programming is normally required.
e) Plug & Play – 1:1 Clone
The data from your original ECU is copied to another fully functional ECU. The cloned unit is then ready for installation without additional programming.
You must send us your original ECU so that we can transfer its data to the replacement unit.
The original ECU must have working communication with the vehicle, a diagnostic tool or our programming equipment. If the required data cannot be read, a complete 1:1 clone may not be possible.
3. Complete Plug & Play Set
A complete matched set containing the ECU, immobilizer components and all other parts required to start the vehicle without additional programming. All components supplied in the set must be installed in the vehicle.
Important:
Dispatch time depends on the selected option. If an unlocked or specially prepared version is ordered, the preparation service usually requires an additional 1–2 business days.
Ask about the product
ECU Engine controller Volkswagen Amarok 0281018005 03L906019FC EDC17CP20
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
120,00 zł
-
shipping
(Poland)
from
120,00 zł
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
ENGINE CONTROL UNIT VOLKSWAGEN AMAROK 0281018005 03L906019FC
The engine control unit 0281018005 and 03L906019FC is a reliable part dedicated to Volkswagen Amarok, guaranteeing correct and stable operation of the power unit and optimal vehicle performance.
FAQ – Engine Control Unit 0281018005 / 03L906019FC
What is the function of engine control unit 0281018005?
The ECU unit with number 0281018005 manages key engine operating processes such as fuel dosing, turbocharger control and emission parameter regulation. The module analyzes sensor signals and in real time adjusts the settings to ensure optimal performance and stable engine operation.
What does the number 03L906019FC mean on the engine computer?
The designation 03L906019FC is the vehicle manufacturer's catalog number assigned to a specific software version and hardware configuration of the control unit. When selecting a part, full compatibility of number 03L906019FC with the factory-installed module must be ensured.
Are 0281018005 and 03L906019FC the same control unit?
The numbers 0281018005 and 03L906019FC refer to the same type of ECU, however they operate within two numbering systems – the electronics manufacturer and the OE number. From a technical matching perspective, compatibility of one of these markings with the original control unit is crucial.
How to verify compatibility of control unit 03L906019FC with the vehicle?
The best solution is to check the number 03L906019FC or 0281018005 directly on the housing of the current ECU. An identical number guarantees hardware and software compatibility. Additionally, fitment can be confirmed based on the VIN number.
Why is it worth searching for the part by number 0281018005?
Entering the full number 0281018005 into the search engine helps avoid confusion with other control unit versions with similar markings. It is the most precise way to find the correct control module.
Is coding required after replacing ECU 03L906019FC?
Yes, in most cases the control unit 03L906019FC requires adaptation or synchronization with the immobilizer and other vehicle modules. This procedure is standard when replacing the engine computer.
What symptoms may indicate failure of control unit 0281018005?
Typical symptoms include difficulty starting the engine, activation of emergency mode, lack of diagnostic communication or irregular engine operation. In such a situation, verifying number 0281018005 allows selection of the appropriate replacement control unit.
In what variants is control unit 0281018005 / 03L906019FC available?
We offer modules in different options – including control units requiring programming or prepared for further configuration. Before purchase, it is worth reviewing the offer details to select the appropriate ECU variant.
What should I do if the ordered control unit 03L906019FC does not fit?
In case of incompatibility, please contact us providing number 03L906019FC or 0281018005 and vehicle details. This will allow quick verification and selection of the correct engine control unit.
