A used engine control unit will not usually start your car straight away, because its memory holds the immobiliser data of the car it came from. We explain how ECU programming, coding and cloning differ, and which preparation option to choose for your replacement ECU.
Engine control unit Volvo 850 2.5 P06842748 1T22S0595
Vendors's code: P06842748
Product code: P06842748
Barcode:
Code 39:
ISBN:
Select a product option:
Individual variants may differ in price
product option
Important: Depending on the ECU type and vehicle model, not all of the options listed below may be available.
To select the correct option for your vehicle and ECU, please contact us before purchasing:
contact@auto24parts.com
1. Locked
This option is intended for professional workshops with the required specialist equipment and technical knowledge.
The ECU has been removed from a vehicle intended for recycling and still contains the immobilizer data and other information from the previous vehicle. Before it can be used in another car, it must be unlocked and then programmed using specialist automotive diagnostic equipment.
2. Unlocked
Several preparation methods may be available. The possible options depend on the ECU type, vehicle model and immobilizer system. Please contact us before purchasing, as some preparation methods are not available for every ECU.
Our electronics specialists can prepare the ECU in one of the following ways:
a) ECU with PIN code (Car Pass)
The PIN code is supplied, but programming with a suitable diagnostic tool is still required. After installing the ECU, it must be reset using the supplied PIN code and then programmed to the vehicle’s immobilizer system.
b) VIRGIN ECU
The data from the previous vehicle is removed and the ECU is restored to a clean, factory-like state. After installation, it must be programmed to the vehicle using a compatible specialist diagnostic tool. Unless another preparation method is specified in the product description, this is the standard unlocking option for most of our ECUs.
c) Plug & Play – IMMO OFF
The immobilizer function is disabled in the ECU. After installation, the engine can start without additional immobilizer programming. Please note that the vehicle will no longer have an active immobilizer function, and an immobilizer warning light or fault code may remain, depending on the vehicle model.
d) Plug & Play – Automatic Programming
After installation, the ECU automatically learns and saves the required vehicle data. No additional programming is normally required.
e) Plug & Play – 1:1 Clone
The data from your original ECU is copied to another fully functional ECU. The cloned unit is then ready for installation without additional programming.
You must send us your original ECU so that we can transfer its data to the replacement unit.
The original ECU must have working communication with the vehicle, a diagnostic tool or our programming equipment. If the required data cannot be read, a complete 1:1 clone may not be possible.
3. Complete Plug & Play Set
A complete matched set containing the ECU, immobilizer components and all other parts required to start the vehicle without additional programming. All components supplied in the set must be installed in the vehicle.
Important:
Dispatch time depends on the selected option. If an unlocked or specially prepared version is ordered, the preparation service usually requires an additional 1–2 business days.
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Does ECU P06842748 fit your Volvo 850?
A used, working engine control unit for the Volvo 850 with the 2.5 engine, numbers P06842748 and 1T22S0595. Before buying, compare them with the label of the unit in your car.
Engine control unit Volvo 850 2.5 P06842748
The unit manages the 2.5 engine in the Volvo 850: it uses sensor signals to set fuel delivery and ignition. It is used, working and in good condition.
Numbers to compare
- P06842748 - Volvo part number
- 1T22S0595 - additional label marking
The number on the label decides the fit. The Volvo 850 had several engine and ECU versions, so the model name alone is not enough.
Signs of a faulty ECU
- the engine does not start although the starter works,
- no spark or no injection,
- an engine warning light and fault codes that return after clearing,
- the diagnostic tool cannot connect to the unit.
Before replacing it, check the power supply, earths and the fuel injection relay, as their faults cause similar symptoms.
Locked or unlocked?
A locked ECU holds the data and immobiliser of the previous car, so it suits garages that programme it themselves. We prepare the unlocked version before dispatch. The preparation method depends on the software and immobiliser, so ask us before ordering.
All variants are described on the Locked & Unlocked ECUs page.
Questions and answers
| Is this a gearbox control unit? |
|---|
| No. It is an engine control unit for the Volvo 850 2.5. |
| What condition is it in? |
| Used, working, in good condition, with a 6-month warranty. |
Send the number or a photo of your unit label to contact@auto24parts.com and we will check the fit.