A properly functioning ABS system is the foundation of road safety. Its main task is to prevent wheel lock-up during emergency braking, which allows the driver to maintain full control of the vehicle. The heart of this system is the electronic ABS pump controller. When it fails, the system stops working. A proper diagnosis of the problem allows you to avoid unnecessary costs and quickly restore brake efficiency.
ECU Engine controller AUDI A3 1.6 AKL AEH 06A906019BS SIEMENS 5WP4433 02
Vendors's code: 06A906019BS
Product code: 8095-619CC
Barcode:
Code 39:
ISBN:
Select a product option:
Individual variants may differ in price
product option
Important: Depending on the ECU type and vehicle model, not all of the options listed below may be available.
To select the correct option for your vehicle and ECU, please contact us before purchasing:
contact@auto24parts.com
1. Locked
This option is intended for professional workshops with the required specialist equipment and technical knowledge.
The ECU has been removed from a vehicle intended for recycling and still contains the immobilizer data and other information from the previous vehicle. Before it can be used in another car, it must be unlocked and then programmed using specialist automotive diagnostic equipment.
2. Unlocked
Several preparation methods may be available. The possible options depend on the ECU type, vehicle model and immobilizer system. Please contact us before purchasing, as some preparation methods are not available for every ECU.
Our electronics specialists can prepare the ECU in one of the following ways:
a) ECU with PIN code (Car Pass)
The PIN code is supplied, but programming with a suitable diagnostic tool is still required. After installing the ECU, it must be reset using the supplied PIN code and then programmed to the vehicle’s immobilizer system.
b) VIRGIN ECU
The data from the previous vehicle is removed and the ECU is restored to a clean, factory-like state. After installation, it must be programmed to the vehicle using a compatible specialist diagnostic tool. Unless another preparation method is specified in the product description, this is the standard unlocking option for most of our ECUs.
c) Plug & Play – IMMO OFF
The immobilizer function is disabled in the ECU. After installation, the engine can start without additional immobilizer programming. Please note that the vehicle will no longer have an active immobilizer function, and an immobilizer warning light or fault code may remain, depending on the vehicle model.
d) Plug & Play – Automatic Programming
After installation, the ECU automatically learns and saves the required vehicle data. No additional programming is normally required.
e) Plug & Play – 1:1 Clone
The data from your original ECU is copied to another fully functional ECU. The cloned unit is then ready for installation without additional programming.
You must send us your original ECU so that we can transfer its data to the replacement unit.
The original ECU must have working communication with the vehicle, a diagnostic tool or our programming equipment. If the required data cannot be read, a complete 1:1 clone may not be possible.
3. Complete Plug & Play Set
A complete matched set containing the ECU, immobilizer components and all other parts required to start the vehicle without additional programming. All components supplied in the set must be installed in the vehicle.
Important:
Dispatch time depends on the selected option. If an unlocked or specially prepared version is ordered, the preparation service usually requires an additional 1–2 business days.
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
ECU ENGINE CONTROLLER 06A906019BS SIEMENS 5WP4433 for AUDI A3 1.6 AKL AEH
Tested ECU engine controller with part numbers 06A906019BS and 5WP4433 for Audi A3 1.6 AKL/AEH – reliable compatibility and trouble-free operation after installation.
Does the 06A906019BS engine controller fit Audi A3 1.6 AKL?
Yes, the ECU Engine controller with part number 06A906019BS is used in Audi A3 1.6 with the AKL engine. If your current controller has markings Siemens 5WP4433 02 or similar, there is a very high chance of full compatibility without problems during installation.
How to check if the 5WP4433 02 computer is suitable for Audi A3 8L 1.6 AEH?
The most important thing is to compare the numbers: 5WP4433 02 and 06A906019BS. Such controllers were used in Audi A3 8L 1.6 AEH, therefore matching numbers usually mean that the part should work correctly without modifications.
Does the Siemens 5WP4433 controller fit only Audi A3 or also VW Golf 1.6?
The Siemens 5WP4433 02 controller with OEM number 06A906019BS was used not only in Audi A3 but also in VW Group models such as Golf 1.6. This means it is a widely used unit in 1.6 petrol engines.
What is the difference between controller 06A906019BS and other versions in Audi A3 1.6?
Differences between controllers such as 06A906019BS, 5WP4433 02 and other versions may concern software, immobilizer configuration or minor hardware revisions. For this reason it is always best to match the part by identical number, especially in Audi A3 1.6 AKL AEH.
Does the 06A906019BS Siemens 5WP4433 02 ECU Engine controller require programming in Audi A3?
In most cases the controller 06A906019BS / Siemens 5WP4433 02 may require adaptation or immobilizer deactivation (immo off), especially if it comes from another vehicle. This is a standard procedure when replacing an ECU in Audi A3 1.6.