Vendors's code:
Product code: 1585-528E3
Barcode:
Code 39:
ISBN:
Select a product option:
Individual variants may differ in price
Important: Depending on the ECU type and vehicle model, not all of the options listed below may be available.
To select the correct option for your vehicle and ECU, please contact us before purchasing:
contact@auto24parts.com
1. Locked
This option is intended for professional workshops with the required specialist equipment and technical knowledge.
The ECU has been removed from a vehicle intended for recycling and still contains the immobilizer data and other information from the previous vehicle. Before it can be used in another car, it must be unlocked and then programmed using specialist automotive diagnostic equipment.
2. Unlocked
Several preparation methods may be available. The possible options depend on the ECU type, vehicle model and immobilizer system. Please contact us before purchasing, as some preparation methods are not available for every ECU.
Our electronics specialists can prepare the ECU in one of the following ways:
a) ECU with PIN code (Car Pass)
The PIN code is supplied, but programming with a suitable diagnostic tool is still required. After installing the ECU, it must be reset using the supplied PIN code and then programmed to the vehicle’s immobilizer system.
b) VIRGIN ECU
The data from the previous vehicle is removed and the ECU is restored to a clean, factory-like state. After installation, it must be programmed to the vehicle using a compatible specialist diagnostic tool. Unless another preparation method is specified in the product description, this is the standard unlocking option for most of our ECUs.
c) Plug & Play – IMMO OFF
The immobilizer function is disabled in the ECU. After installation, the engine can start without additional immobilizer programming. Please note that the vehicle will no longer have an active immobilizer function, and an immobilizer warning light or fault code may remain, depending on the vehicle model.
d) Plug & Play – Automatic Programming
After installation, the ECU automatically learns and saves the required vehicle data. No additional programming is normally required.
e) Plug & Play – 1:1 Clone
The data from your original ECU is copied to another fully functional ECU. The cloned unit is then ready for installation without additional programming.
You must send us your original ECU so that we can transfer its data to the replacement unit.
The original ECU must have working communication with the vehicle, a diagnostic tool or our programming equipment. If the required data cannot be read, a complete 1:1 clone may not be possible.
3. Complete Plug & Play Set
A complete matched set containing the ECU, immobilizer components and all other parts required to start the vehicle without additional programming. All components supplied in the set must be installed in the vehicle.
Important:
Dispatch time depends on the selected option. If an unlocked or specially prepared version is ordered, the preparation service usually requires an additional 1–2 business days.
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
We offer a tested ECU ENGINE CONTROLLER for NISSAN PULSAR with part numbers MEC930-320 and MEC930320, fully compatible according to the part number.
The offered NISSAN PULSAR MEC930-320 ECU ENGINE CONTROLLER is an electronic component responsible for the correct operation of the engine unit. The ECU module supervises, among other things, engine operating parameters, communication with selected vehicle components and proper control of vehicle systems. If you are looking for a part marked with the number MEC930-320, it is recommended to compare the marking with the plate on the old controller before purchasing.
The offer includes the Nissan Pulsar MEC930320 engine computer, also searched as ECU Nissan Pulsar MEC930-320 or MEC930-320 engine control module. When selecting the part, the most important factor is the matching part number, therefore the catalog number should match the version installed in the vehicle. It is precisely the number MEC930-320 for Nissan Pulsar that is the main indicator of compatibility.
Engine controllers from this group are often searched for by people repairing electronic faults, problems with starting the vehicle, communication errors or unstable engine operation. If you are interested in the Nissan Pulsar MEC930-320 ECU controller, pay attention not only to the vehicle model, but also to the full manufacturer marking and module version. This helps avoid mistakes when placing an order.
The number MEC930-320 is sometimes entered in search engines in different forms, which is why the description also includes the variant MEC930320 Nissan Pulsar. Regardless of the spelling, it refers to the same type of engine controller which should be selected based on the markings on the housing. If you are replacing a damaged module, comparing the old part with the new one is the safest verification method.
Not always. Even if the part is described as Nissan Pulsar MEC930-320 controller, before purchasing you must check that the number matches the marking on the housing of the old module. In practice, the marking MEC930-320 is the key factor when selecting the correct part.
It is the computer controlling the operation of the engine, also called the engine controller or ECU module. Searched as ECU MEC930-320, it is responsible for processing data from sensors and controlling selected functions of the engine unit.
The best way is to read the marking directly from the old controller installed in the vehicle. The number should match character by character, therefore it is recommended to compare both the notation MEC930-320 and the possible version without a dash, which is MEC930320.
No. The vehicle model is important, but in automotive electronics the decisive factor is the part number. Therefore when purchasing the Nissan Pulsar MEC930-320 engine computer you should mainly rely on the full module designation.
Typical symptoms include difficulties starting the vehicle, unstable engine operation, lack of communication with selected systems or appearing diagnostic errors. In such a situation, the NISSAN PULSAR MEC930-320 engine controller is often checked.
Users search for the product in different ways, for example typing MEC930-320 Nissan, Nissan Pulsar MEC930320 or MEC930-320 engine controller. These are natural variants of the same part, therefore including several forms of the number helps users find the correct product more easily.
Before placing an order, compare the markings on your part, because matching the catalog number is the most important parameter for selecting the correct component. If you are looking for the Nissan Pulsar MEC930-320 module, verifying the symbol from the housing helps reduce the risk of mistakes and speeds up the selection of the correct controller.
Cookies and related technologies enable the website to function properly and help us tailor the offer to your needs. You can accept our use of all these files and go to the store or adjust the use of files to your preferences by selecting the "Customize consents" option.
Here you can specify your preferences regarding our use of cookies.
These files are necessary for the operation of our website, so you cannot disable them.
These files enable you to use other functions of the website (other than those necessary for its operation). Enabling them will give you access to the full functionality of the website.
These files allow us to analyze our online store, which may contribute to its better functioning and adaptation to the needs of Users.
Thanks to these files, we can conduct marketing activities.
