A properly functioning ABS system is the foundation of road safety. Its main task is to prevent wheel lock-up during emergency braking, which allows the driver to maintain full control of the vehicle. The heart of this system is the electronic ABS pump controller. When it fails, the system stops working. A proper diagnosis of the problem allows you to avoid unnecessary costs and quickly restore brake efficiency.
ECU Engine controller RENAULT TRAFIC OPEL VIVARO 2.0 DCI 0281014648 8200666516 8200823728
Vendors's code: 0281014648
Product code: 8200666516
Barcode:
Code 39:
ISBN:
£251.24
Price
£251.24
Regular price:
£251.24
0%
£309.03
Price
£309.03
Regular price:
£309.03
0%
Select a product option:
Individual variants may differ in price
product option
Important: Depending on the ECU type and vehicle model, not all of the options listed below may be available.
To select the correct option for your vehicle and ECU, please contact us before purchasing:
contact@auto24parts.com
1. Locked
This option is intended for professional workshops with the required specialist equipment and technical knowledge.
The ECU has been removed from a vehicle intended for recycling and still contains the immobilizer data and other information from the previous vehicle. Before it can be used in another car, it must be unlocked and then programmed using specialist automotive diagnostic equipment.
2. Unlocked
Several preparation methods may be available. The possible options depend on the ECU type, vehicle model and immobilizer system. Please contact us before purchasing, as some preparation methods are not available for every ECU.
Our electronics specialists can prepare the ECU in one of the following ways:
a) ECU with PIN code (Car Pass)
The PIN code is supplied, but programming with a suitable diagnostic tool is still required. After installing the ECU, it must be reset using the supplied PIN code and then programmed to the vehicle’s immobilizer system.
b) VIRGIN ECU
The data from the previous vehicle is removed and the ECU is restored to a clean, factory-like state. After installation, it must be programmed to the vehicle using a compatible specialist diagnostic tool. Unless another preparation method is specified in the product description, this is the standard unlocking option for most of our ECUs.
c) Plug & Play – IMMO OFF
The immobilizer function is disabled in the ECU. After installation, the engine can start without additional immobilizer programming. Please note that the vehicle will no longer have an active immobilizer function, and an immobilizer warning light or fault code may remain, depending on the vehicle model.
d) Plug & Play – Automatic Programming
After installation, the ECU automatically learns and saves the required vehicle data. No additional programming is normally required.
e) Plug & Play – 1:1 Clone
The data from your original ECU is copied to another fully functional ECU. The cloned unit is then ready for installation without additional programming.
You must send us your original ECU so that we can transfer its data to the replacement unit.
The original ECU must have working communication with the vehicle, a diagnostic tool or our programming equipment. If the required data cannot be read, a complete 1:1 clone may not be possible.
3. Complete Plug & Play Set
A complete matched set containing the ECU, immobilizer components and all other parts required to start the vehicle without additional programming. All components supplied in the set must be installed in the vehicle.
Important:
Dispatch time depends on the selected option. If an unlocked or specially prepared version is ordered, the preparation service usually requires an additional 1–2 business days.
Ask about the product
ECU Engine controller RENAULT TRAFIC OPEL VIVARO 2.0 DCI 0281014648 8200666516 8200823728
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
£23.18
-
shipping
(Poland)
from
£23.18
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Engine control unit Renault Trafic Opel Vivaro 2.0 DCI 8200823728 / 8200666516 / 0281014648
Original and tested Bosch ECU 0281014648 with part numbers 8200823728 and 8200666516 for selected Renault Trafic and Opel Vivaro 2.0 DCI models, ready for installation, with a warranty and fast shipping.
FAQ – Renault Trafic and Opel Vivaro 2.0 dCi engine ECU
1. Which vehicles use the 0281014648 engine ECU?
The Bosch engine control unit 0281014648 is designed for Renault Trafic and Opel Vivaro vehicles equipped with the 2.0 dCi engine. Before ordering, compare this number with the reference on the original ECU.
2. Does the 8200666516 part number need to match exactly?
The safest option is to select the ECU by the 8200666516 part number, as the unit references affect compatibility with the vehicle wiring, immobiliser system and engine version.
3. Can the 8200823728 ECU be used as a replacement?
The 8200823728 number is found on engine control units used in Renault Trafic and Opel Vivaro 2.0 dCi vehicles. To avoid ordering the wrong unit, also check the Bosch number and all references printed on the ECU housing.
4. How can I tell whether my engine ECU is faulty?
Common signs of ECU failure include starting problems, no diagnostic communication, engine stalling or fuel injection control faults. For the 0281014648 / 8200666516 unit, the symptoms should always be confirmed with a diagnostic test.
5. Why should an engine ECU be selected by part number?
Choosing the unit by the 0281014648, 8200666516 and 8200823728 references reduces the risk of purchasing an incompatible module. This is the most accurate way to identify an ECU for the Renault Trafic and Opel Vivaro 2.0 dCi.
