Skip to main content
English zł
English zł
Open search engine
Search
Close search engine Clear Search
Open search engine
Search
Close search engine Clear Search
English zł
English zł
Products in the cart: 0. See details
Open search engine
Search
Close search engine Clear Search

ESP+PML Control Unit Mercedes-Benz Bosch 0265109542 A2115406145

  • Part Type ESP+PML control unit
  • Vehicle Make and Model Mercedes-Benz
  • Manufacturer Bosch
  • Manufacturer Part Number 0 265 109 542 / 0265109542
  • OEM Part Number A 211 540 61 45 / A2115406145
  • Part Number A 211 545 50 32 / A2115455032
  • Part Number A 211 448 04 53 / A2114480453
  • Part Number A 211 448 02 02 / A2114480202
  • Warranty 6-month warranty
  • Condition Used, working, in good condition
  • Testing & Inspection Device thoroughly inspected and tested by a certified technician
Bosch
with VAT without VAT
Price 1 400,00 zł
Availability:
product-availability-module In stock
pcs.

Fast Delivery

DHL Express - 30 euro

6 Month Warranty

Returns Possible up to 14 days

Secure payments

Stripe - Paypal - Credit Card
Ask about the product
Shipping from 120,00 zł - shipping (Poland)

Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price


PRODUCT DETAILS

  • Part Type ESP+PML control unit
  • Vehicle Make and Model Mercedes-Benz
  • Manufacturer Bosch
  • Manufacturer Part Number 0 265 109 542 / 0265109542
  • OEM Part Number A 211 540 61 45 / A2115406145
  • Part Number A 211 545 50 32 / A2115455032
  • Part Number A 211 448 04 53 / A2114480453
  • Part Number A 211 448 02 02 / A2114480202
  • Warranty 6-month warranty
  • Condition Used, working, in good condition
  • Testing & Inspection Device thoroughly inspected and tested by a certified technician

ESP control unit A2115406145 – does it fit your Mercedes?

This is a used, working ESP+PML control unit made by Bosch, Mercedes number A2115406145, Bosch number 0265109542. Before buying, compare the numbers with the label on the control unit in your Mercedes-Benz.

Go to full description

ESP+PML Control Unit Mercedes-Benz Bosch A2115406145

The ESP control unit reads the signals from the wheel speed sensors, the steering angle sensor and the vehicle acceleration sensors, and if the car starts to skid it brakes selected wheels to keep it on course. It also handles the ABS and ASR functions. The PML marking on the label refers to the speed-sensitive power steering function (Parameterlenkung).

Part numbers to compare

  • A2115406145 – Mercedes-Benz control unit number (on the label ZB A 211 540 61 45)
  • 0265109542 – Bosch number, on the label: 0 265 109 542
  • A2115455032 – hardware number (on the label HW A 211 545 50 32)
  • A2114480453 – software number (on the label AS A 211 448 04 53)
  • A2114480202 – software number (on the label VAFS A 211 448 02 02)

You will find all the numbers on the label on the control unit housing. The safest way to choose is by the Mercedes number marked ZB – many versions of ESP control units with different software were fitted to Mercedes-Benz cars.

Symptoms of a faulty ESP control unit

When the ESP control unit starts to fail, the most common symptoms are:

  • ESP and ABS warning lights on,
  • an ESP fault message on the display,
  • ABS or ESP not working when braking,
  • no communication with the control unit during diagnostics.

Before replacing it, read the fault codes with a diagnostic tool and check the wheel speed sensors, fuses and control unit connectors – a faulty sensor causes similar symptoms. After replacement, the control unit may need to be coded with a diagnostic tool.

Frequently asked questions

Which vehicle does the ESP control unit A2115406145 fit?
This control unit is for Mercedes-Benz cars. Match it by the Mercedes number A2115406145 on the label (marked ZB) – compare it with the label on the control unit in your car.
Which number is the Mercedes number and which is the Bosch number?
A2115406145 (on the label ZB A 211 540 61 45) is the Mercedes-Benz number, and 0265109542 (on the label 0 265 109 542) is the Bosch manufacturer number. The other numbers on the label identify the hardware (HW) and software (AS, VAFS).
Does the control unit need coding after fitting?
The control unit may need to be coded with a diagnostic tool – this depends on the version and equipment of the car.
What condition is this control unit in?
It is a used part in good working condition. The warranty period is shown in the product specification table.

Not sure whether this control unit fits your car? Send us a photo of the label on your old unit and we will check compatibility.

  • How to Check the Operation of a Transmission Control Module - Symptoms

    A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.

    Read more
  • Burned Engine Control Unit: Symptoms, Causes, and the Optimal Solution

    A burned engine control unit (ECU) usually causes a sudden no-start: the engine cranks but will not start, the diagnostic tool cannot connect to the ECU, and the engine management light does not come on when you switch on the ignition. The most common causes are a voltage spike when jump-starting, reversed battery polarity, a faulty voltage regulator and a short circuit in the wiring loom or in an actuator. Below we explain how to tell a burned ECU from a power supply fault, what causes this kind of failure and how to choose a replacement ECU.

    Read more
  • Flooded Automatic Transmission Control Module or Burnt TCM - Symptoms

    A burnt-out or flooded automatic transmission control module (TCM) usually causes sudden symptoms: limp mode with the gearbox stuck in one gear, harsh thumps when you select D or R, no response to the gear selector, flashing or blank PRND letters and no communication between the diagnostic tool and the gearbox control unit. Flooding is most often caused by blocked scuttle panel drains, washing the engine bay or coolant in the gearbox oil, and a burnout by overheating, a short circuit or a voltage spike. Below we explain the symptoms, what to do straight away and why drying out or repairing such a control unit rarely gives a lasting result.

    Read more
  • Flooded engine control unit - symptoms, consequences and what to do

    A flooded engine control unit (ECU) most often causes a no-start, a 'Christmas tree' of warning lights on the dashboard, no communication with the diagnostic tool, or rough running in limp mode. Water usually gets into the ECU from blocked scuttle drains, after the engine bay has been cleaned with a pressure washer, or after driving through deep water. Below we describe the symptoms of a water-damaged ECU, what to do straight after the ECU gets wet, and why drying or repairing it rarely gives lasting results.

    Read more