A properly functioning ABS system is the foundation of road safety. Its main task is to prevent wheel lock-up during emergency braking, which allows the driver to maintain full control of the vehicle. The heart of this system is the electronic ABS pump controller. When it fails, the system stops working. A proper diagnosis of the problem allows you to avoid unnecessary costs and quickly restore brake efficiency.
ABS Pump FORD 0265311134 RK312B373AE 0265957322
Vendors's code: RK312B373AE
Product code: 0265957322
Barcode:
Code 39:
ISBN:
€569.11
Price
€569.11
€700.00
Price
€700.00
Select a product option:
Individual variants may differ in price
product option
Important: Depending on the ECU type and vehicle model, not all of the options listed below may be available.
To select the correct option for your vehicle and ECU, please contact us before purchasing:
contact@auto24parts.com
1. Locked
This option is intended for professional workshops with the required specialist equipment and technical knowledge.
The ECU has been removed from a vehicle intended for recycling and still contains the immobilizer data and other information from the previous vehicle. Before it can be used in another car, it must be unlocked and then programmed using specialist automotive diagnostic equipment.
2. Unlocked
Several preparation methods may be available. The possible options depend on the ECU type, vehicle model and immobilizer system. Please contact us before purchasing, as some preparation methods are not available for every ECU.
Our electronics specialists can prepare the ECU in one of the following ways:
a) ECU with PIN code (Car Pass)
The PIN code is supplied, but programming with a suitable diagnostic tool is still required. After installing the ECU, it must be reset using the supplied PIN code and then programmed to the vehicle’s immobilizer system.
b) VIRGIN ECU
The data from the previous vehicle is removed and the ECU is restored to a clean, factory-like state. After installation, it must be programmed to the vehicle using a compatible specialist diagnostic tool. Unless another preparation method is specified in the product description, this is the standard unlocking option for most of our ECUs.
c) Plug & Play – IMMO OFF
The immobilizer function is disabled in the ECU. After installation, the engine can start without additional immobilizer programming. Please note that the vehicle will no longer have an active immobilizer function, and an immobilizer warning light or fault code may remain, depending on the vehicle model.
d) Plug & Play – Automatic Programming
After installation, the ECU automatically learns and saves the required vehicle data. No additional programming is normally required.
e) Plug & Play – 1:1 Clone
The data from your original ECU is copied to another fully functional ECU. The cloned unit is then ready for installation without additional programming.
You must send us your original ECU so that we can transfer its data to the replacement unit.
The original ECU must have working communication with the vehicle, a diagnostic tool or our programming equipment. If the required data cannot be read, a complete 1:1 clone may not be possible.
3. Complete Plug & Play Set
A complete matched set containing the ECU, immobilizer components and all other parts required to start the vehicle without additional programming. All components supplied in the set must be installed in the vehicle.
Important:
Dispatch time depends on the selected option. If an unlocked or specially prepared version is ordered, the preparation service usually requires an additional 1–2 business days.
Ask about the product
ABS Pump FORD 0265311134 RK312B373AE 0265957322
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
€30.00
-
shipping
(Poland)
from
€30.00
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
ABS control unit and pump 0265311134 0265957322 RK312B373AE for Ford vehicles
We offer a tested ABS pump with control unit, part numbers 0265311134, RK312B373AE and 0265957322, suitable for professional reconditioning, replacement or matching with a compatible Ford model.
Faq – Ford ABS pump and control unit 0265311134 RK312B373AE 0265957322
Is the Ford ABS pump with part number RK312B373AE compatible with my vehicle?
The most important compatibility criterion is to compare the part number RK312B373AE and the manufacturer markings 0265311134 and 0265957322. If these numbers match the module installed in your vehicle, the chance of full compatibility with the braking system is significantly higher.
How can I check whether the ABS control unit 0265957322 is the correct replacement?
Before purchase, it is recommended to compare all markings on the ABS pump and control unit. The number 0265957322 should match the number on the currently installed module. In case of doubt, you can send a photo of the identification label so the part compatibility can be verified.
What does the Bosch number 0265311134 on the ABS pump mean?
The marking 0265311134 identifies a specific version of the hydraulic ABS pump. Together with the control unit numbers and the vehicle manufacturer reference, it helps select the correct component and avoid installation or system communication problems.
Is the Ford ABS module RK312B373AE tested before shipping?
Each ABS control unit and pump offered for sale undergoes a technical inspection before dispatch. The electronics, connector condition and basic operating parameters are checked, so the customer receives a part prepared for installation.
Why should I search for this part using the numbers 0265311134, RK312B373AE and 0265957322?
Part numbers are the most accurate way to identify an ABS module. Searching by 0265311134, RK312B373AE and 0265957322 makes it easier to find the correct ABS pump and control unit while reducing the risk of ordering the wrong version.
