A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
Gearbox control unit Canter Fuso Mitsubishi 0204770011 ME427170
Vendors's code: 0204770011
Product code: 7920-75814
Barcode:
Code 39:
ISBN:
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Looking for a gearbox control unit for the Canter Fuso?
This is a used, working gearbox control unit for the Canter Fuso - numbers 0204770011; ME427170. Before buying, compare the numbers with the label on the unit in your car.
Gearbox control unit Canter Fuso
For the Canter Fuso we offer a used gearbox control unit, working and in good condition.
Numbers to compare
- 0204770011 - manufacturer number
- ME427170 - additional part number
Fitment
Compare the number 32481110760 in full with the number on your unit. Different versions were fitted to the same models, so the number decides, not the model and year alone.
Signs of a faulty gearbox control unit
- the diagnostic tool shows gearbox control unit faults,
- gear changes are too harsh or too soft,
- the gearbox behaves differently when cold and when warm,
- the car enters limp mode and stays in one gear.
Remember that rough gearbox operation can also be caused by worn oil or mechanical damage, so it is worth running diagnostics first.
Questions and answers
| What condition is this control unit in? |
|---|
| It is a used, working control unit in good condition, covered by a 6-month warranty. |
| How do I check whether the control unit will fit my car? |
| Compare the model, year and the numbers on the unit fitted in your car with the numbers in the description. You can also send us a photo. |
| What should I check on delivery? |
| Check that the numbers on the unit match the description and that the connector and housing show no visible damage. |
Send fitment questions to contact@auto24parts.com - give the model, year and the number on the unit.