A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
Gearbox control unit Iveco Stralis Bosch 0260001028 6009371001
Vendors's code: 0260001028
Product code: 538A-259CF
Barcode:
Code 39:
ISBN:
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
How to choose a gearbox control unit for the Iveco Stralis?
This is a used, working gearbox control unit for the Iveco Stralis - numbers 0 260 001 028 / 0260001028; 6009 371 001 / 6009371001. Before buying, compare the numbers with the label on the unit in your car.
Gearbox control unit Iveco Stralis
The gearbox control unit receives signals from the sensors and decides when and how gears are changed. The unit on offer comes from a Iveco Stralis and is used, working and in good condition.
Numbers to compare
- 0 260 001 028 / 0260001028 - Bosch number
- 6009 371 001 / 6009371001 - ZF number
- ZF6009371001 - additional part number
Fitment
Compare the number 0 260 002 196 in full with the number on your unit. Different versions were fitted to the same models, so the number decides, not the model and year alone.
Signs of a faulty gearbox control unit
- diagnostics point to the gearbox control unit,
- gear changes are jerky,
- a gearbox failure message appears after switching on the ignition,
- the gearbox shifts unevenly or at the wrong moment.
Corroded connectors and a weak battery cause similar symptoms - check them before buying.
Questions and answers
| Which number matters most for fitment? |
|---|
| It is best to compare all the numbers on the label, above all the one marked as the manufacturer or OEM number. |
| Does the gearbox control unit need coding after replacement? |
| Often yes - it depends on the make and version of the car. In many cars a used unit needs coding or adaptation with a diagnostic tool in a workshop. |
| Do you also sell solenoid valves or the complete gearbox? |
| This listing covers the control unit only. You will find other gearbox parts in the other categories of the shop. |
Not sure? Write to contact@auto24parts.com and we will help you choose the right unit for your car.