A used engine control unit will not usually start your car straight away, because its memory holds the immobiliser data of the car it came from. We explain how ECU programming, coding and cloning differ, and which preparation option to choose for your replacement ECU.
Gearbox control unit Jaguar XK8 Bosch 0260002529 ZF6058002011
Vendors's code: 0260002529
Product code: EE6E-80882
Barcode:
Code 39:
ISBN:
Select a product option:
Individual variants may differ in price
product option
Important: Depending on the ECU type and vehicle model, not all of the options listed below may be available.
To select the correct option for your vehicle and ECU, please contact us before purchasing:
contact@auto24parts.com
1. Locked
This option is intended for professional workshops with the required specialist equipment and technical knowledge.
The ECU has been removed from a vehicle intended for recycling and still contains the immobilizer data and other information from the previous vehicle. Before it can be used in another car, it must be unlocked and then programmed using specialist automotive diagnostic equipment.
2. Unlocked
Several preparation methods may be available. The possible options depend on the ECU type, vehicle model and immobilizer system. Please contact us before purchasing, as some preparation methods are not available for every ECU.
Our electronics specialists can prepare the ECU in one of the following ways:
a) ECU with PIN code (Car Pass)
The PIN code is supplied, but programming with a suitable diagnostic tool is still required. After installing the ECU, it must be reset using the supplied PIN code and then programmed to the vehicle’s immobilizer system.
b) VIRGIN ECU
The data from the previous vehicle is removed and the ECU is restored to a clean, factory-like state. After installation, it must be programmed to the vehicle using a compatible specialist diagnostic tool. Unless another preparation method is specified in the product description, this is the standard unlocking option for most of our ECUs.
c) Plug & Play – IMMO OFF
The immobilizer function is disabled in the ECU. After installation, the engine can start without additional immobilizer programming. Please note that the vehicle will no longer have an active immobilizer function, and an immobilizer warning light or fault code may remain, depending on the vehicle model.
d) Plug & Play – Automatic Programming
After installation, the ECU automatically learns and saves the required vehicle data. No additional programming is normally required.
e) Plug & Play – 1:1 Clone
The data from your original ECU is copied to another fully functional ECU. The cloned unit is then ready for installation without additional programming.
You must send us your original ECU so that we can transfer its data to the replacement unit.
The original ECU must have working communication with the vehicle, a diagnostic tool or our programming equipment. If the required data cannot be read, a complete 1:1 clone may not be possible.
3. Complete Plug & Play Set
A complete matched set containing the ECU, immobilizer components and all other parts required to start the vehicle without additional programming. All components supplied in the set must be installed in the vehicle.
Important:
Dispatch time depends on the selected option. If an unlocked or specially prepared version is ordered, the preparation service usually requires an additional 1–2 business days.
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
How do you check whether the Jaguar XK8 unit will fit your car?
This is a used, working gearbox control unit for the Jaguar XK8 - numbers 0 260 002 529 / 0260002529; ZF6058002011. Before buying, compare the numbers with the label on the unit in your car.
Gearbox control unit Jaguar XK8
In the Jaguar XK8 the gearbox control unit runs the automatic transmission. We offer a used, working unit in good condition.
Numbers to compare
- 0 260 002 529 / 0260002529 - Bosch number
- ZF6058002011 - additional part number
Fitment
Compare the number 5WK33434K02 in full with the number on your unit. Different versions were fitted to the same models, so the number decides, not the model and year alone.
Signs of a faulty gearbox control unit
- a gearbox failure message appears after switching on the ignition,
- the car will not move in D or R,
- a gearbox fault message appears,
- gear changes take longer than usual.
Start by reading the fault codes and checking the power supply; replace the unit only when diagnostics point to it.
Questions and answers
| Can a control unit with a different number fit too? |
|---|
| Sometimes, but we do not assume listings are interchangeable. Compare all numbers with the label on your unit or ask us. |
| What should I check on delivery? |
| Check that the numbers on the unit match the description and that the connector and housing show no visible damage. |
| Is the control unit new? |
| The control unit is used but working. It comes with a 6-month warranty. |
Send fitment questions to contact@auto24parts.com - give the model, year and the number on the unit.