Skip to main content
In English +48 792 797 344 Polski +48 501 409 435 +48 32 201 72 96 En Español +34 63 727 27 85 contact@auto24parts.com
English €
English €
Open search engine
Search
Close search engine Clear Search
Open search engine
Search
Close search engine Clear Search
English €
English €
Wishlist
Products in the cart: 0. See details
Open search engine
Search
Close search engine Clear Search

Heater blower resistor for climate control Opel Vectra C Signum 73421312U PU2K
  • Heater blower resistor for climate control Opel Vectra C Signum 73421312U PU2K
  • Heater blower resistor for climate control Opel Vectra C Signum 73421312U PU2K - photo 2
  • Part Type Heater blower resistor for climate control
  • Vehicle Make and Model Opel Vectra C Signum
  • Manufacturer Part Number 73421312U
  • OEM Part Number PU2K
  • Part Number 006962R/15 / 006962R15
  • Warranty 6-month warranty
  • Condition Used, working, in good condition
  • Testing & Inspection Device thoroughly inspected and tested by a certified technician
with VAT without VAT
Price €80.00
PLN GBP EUR USD
Availability:
In stock
pcs.

Fast Delivery

DHL Express - 30 euro

6 Month Warranty

Returns Possible up to 14 days

Secure payments

Stripe - Paypal - Credit Card
Ask about the product
Shipping from €30.00 - shipping (Poland)

Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price

PRODUCT DETAILS

  • Part Type Heater blower resistor for climate control
  • Vehicle Make and Model Opel Vectra C Signum
  • Manufacturer Part Number 73421312U
  • OEM Part Number PU2K
  • Part Number 006962R/15 / 006962R15
  • Warranty 6-month warranty
  • Condition Used, working, in good condition
  • Testing & Inspection Device thoroughly inspected and tested by a certified technician

Does part number 73421312U match your car?

A used, working heater blower resistor for the Opel Vectra C and Signum with automatic climate control. Numbers: 73421312U / PU2K / 006962R15. Compare them with the label on your part before buying.

Go to full description

Heater blower resistor for climate control Opel Vectra C Signum 73421312U PU2K

A used heater blower resistor taken from an Opel Vectra C or Signum with automatic climate control. It works and is in good condition.

Listing details

  • Opel Vectra C, Signum - model
  • automatic climate control - air conditioning version

What it does

The resistor sets the speed of the heater blower, so a fault usually shows as weak or missing airflow in the cabin.

Signs of a fault

  • the blower works only on some speeds,
  • airflow only on the highest setting,
  • no airflow even though the blower motor is fine,
  • a burning smell near the vents.

Check the fuse, the connector and the blower motor first, as their faults look similar.

Numbers to compare

  • 73421312U - part number
  • PU2K - additional number
  • 006962R/15 (006962R15) - additional number

Compare the number 73421312U in full with your part - the same models used different versions.

Questions and answers

What condition is the part in?
It is used, working and in good condition, with a 6-month warranty.
Where do I find the number?
It is on the resistor housing or on its label.

Write to contact@auto24parts.com with your model, year and air conditioning type and we will check the fit.

Latest Articles
See All

  • How to Check the Operation of a Transmission Control Module - Symptoms

    A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.

    Read more

  • Burned Engine Control Unit: Symptoms, Causes, and the Optimal Solution

    A burned engine control unit (ECU) usually causes a sudden no-start: the engine cranks but will not start, the diagnostic tool cannot connect to the ECU, and the engine management light does not come on when you switch on the ignition. The most common causes are a voltage spike when jump-starting, reversed battery polarity, a faulty voltage regulator and a short circuit in the wiring loom or in an actuator. Below we explain how to tell a burned ECU from a power supply fault, what causes this kind of failure and how to choose a replacement ECU.

    Read more

  • Flooded Automatic Transmission Control Module or Burnt TCM - Symptoms

    A burnt-out or flooded automatic transmission control module (TCM) usually causes sudden symptoms: limp mode with the gearbox stuck in one gear, harsh thumps when you select D or R, no response to the gear selector, flashing or blank PRND letters and no communication between the diagnostic tool and the gearbox control unit. Flooding is most often caused by blocked scuttle panel drains, washing the engine bay or coolant in the gearbox oil, and a burnout by overheating, a short circuit or a voltage spike. Below we explain the symptoms, what to do straight away and why drying out or repairing such a control unit rarely gives a lasting result.

    Read more

  • Water-damaged ABS pump control module or a burnt-out one - what next?

    A water-damaged or burnt-out ABS pump control module most often lights up the dashboard like a 'Christmas tree' (ABS, ESP and the red brake warning light), leaves the diagnostic tool unable to communicate with the ABS module, makes the pump motor run non-stop or stops the speedometer working. Water usually gets into the module when the scuttle panel drains are blocked, after the engine bay has been cleaned with a pressure washer or after driving through a deep puddle, while a burnout is most often caused by a short circuit or a voltage spike. Below we describe the symptoms, what to do straight away and why drying or repairing such a module rarely gives lasting results.

    Read more

  • Flooded engine control unit - symptoms, consequences and what to do

    A flooded engine control unit (ECU) most often causes a no-start, a 'Christmas tree' of warning lights on the dashboard, no communication with the diagnostic tool, or rough running in limp mode. Water usually gets into the ECU from blocked scuttle drains, after the engine bay has been cleaned with a pressure washer, or after driving through deep water. Below we describe the symptoms of a water-damaged ECU, what to do straight after the ECU gets wet, and why drying or repairing it rarely gives lasting results.

    Read more

  • How to test an ABS module and pump - failure symptoms and checks

    The most common symptom of a faulty ABS pump or ABS module is an ABS warning light that stays on after the engine starts, often together with the ESP light. The brakes still work, but without ABS the wheels can lock under hard braking. To test an ABS module, start by reading the fault codes with a diagnostic tool that can talk to the ABS unit, then check the power supply, the earth and the wheel speed sensors. Only when all of these are fine is the module itself usually to blame.

    Read more