FAQ – HONDA ABS Pump and Control Module 57110TZBG020M1 / 06210924053
How to check if this ABS pump fits – 57110TZBG020M1 or 06210924053?
The safest method is to compare the number from your part. If the module shows 57110TZBG020M1, and on the label or in the service documentation appears 06210924053, it usually refers to the same set (ABS pump + control module) identified with different codes. For certainty, also verify the connector version and the brake line layout.
Is this a complete set: control module and ABS pump in one unit?
Yes, the offer concerns an ABS pump with control module supplied as one complete unit. In practice, this means the hydraulic block and the control electronics operate together as a single assembly. Depending on the vehicle version, the module may require adaptation after installation.
What symptoms may indicate damage to ABS module 06210924053?
Typical signs include an ABS/ESP warning light, intermittent communication errors, no ABS function during emergency braking, or recurring fault codes after clearing. If diagnostics indicate module number 06210924053, it is also recommended to check wheel speed sensors and wiring – harness damage can imitate ABS pump failure.
Is number 57110TZBG020M1 the most important designation for part search?
In search engines, the housing number 57110TZBG020M1 usually provides the most accurate results, but many catalogs also use code 06210924053. That is why we list both designations and use them interchangeably – increasing the chance of finding the correct ABS module without mismatch.
After installing HONDA ABS pump 57110TZBG020M1, does it require coding or bleeding?
After replacement, brake system bleeding is typically required, and in some vehicles an ABS service procedure must also be performed using diagnostic equipment. Coding or adaptation depends on the vehicle and module version – sometimes it is required, and sometimes the unit operates immediately after proper installation.
What should be prepared before purchase to avoid mismatch with module 06210924053 / 57110TZBG020M1?
Prepare a photo of the label showing the numbers (57110TZBG020M1 and/or 06210924053), a photo of the connectors, and information about the production year and engine version. These details allow quick verification of differences in pins, mounting points, and brake system configuration.
