A properly functioning ABS system is the foundation of road safety. Its main task is to prevent wheel lock-up during emergency braking, which allows the driver to maintain full control of the vehicle. The heart of this system is the electronic ABS pump controller. When it fails, the system stops working. A proper diagnosis of the problem allows you to avoid unnecessary costs and quickly restore brake efficiency.
ECU Engine controller HYUNDAI 391122B200 9030933411KC
Vendors's code: 391122B200
Product code: 9030933411KC
Barcode:
Code 39:
ISBN:
Select a product option:
Individual variants may differ in price
product option
Important: Depending on the ECU type and vehicle model, not all of the options listed below may be available.
To select the correct option for your vehicle and ECU, please contact us before purchasing:
contact@auto24parts.com
1. Locked
This option is intended for professional workshops with the required specialist equipment and technical knowledge.
The ECU has been removed from a vehicle intended for recycling and still contains the immobilizer data and other information from the previous vehicle. Before it can be used in another car, it must be unlocked and then programmed using specialist automotive diagnostic equipment.
2. Unlocked
Several preparation methods may be available. The possible options depend on the ECU type, vehicle model and immobilizer system. Please contact us before purchasing, as some preparation methods are not available for every ECU.
Our electronics specialists can prepare the ECU in one of the following ways:
a) ECU with PIN code (Car Pass)
The PIN code is supplied, but programming with a suitable diagnostic tool is still required. After installing the ECU, it must be reset using the supplied PIN code and then programmed to the vehicle’s immobilizer system.
b) VIRGIN ECU
The data from the previous vehicle is removed and the ECU is restored to a clean, factory-like state. After installation, it must be programmed to the vehicle using a compatible specialist diagnostic tool. Unless another preparation method is specified in the product description, this is the standard unlocking option for most of our ECUs.
c) Plug & Play – IMMO OFF
The immobilizer function is disabled in the ECU. After installation, the engine can start without additional immobilizer programming. Please note that the vehicle will no longer have an active immobilizer function, and an immobilizer warning light or fault code may remain, depending on the vehicle model.
d) Plug & Play – Automatic Programming
After installation, the ECU automatically learns and saves the required vehicle data. No additional programming is normally required.
e) Plug & Play – 1:1 Clone
The data from your original ECU is copied to another fully functional ECU. The cloned unit is then ready for installation without additional programming.
You must send us your original ECU so that we can transfer its data to the replacement unit.
The original ECU must have working communication with the vehicle, a diagnostic tool or our programming equipment. If the required data cannot be read, a complete 1:1 clone may not be possible.
3. Complete Plug & Play Set
A complete matched set containing the ECU, immobilizer components and all other parts required to start the vehicle without additional programming. All components supplied in the set must be installed in the vehicle.
Important:
Dispatch time depends on the selected option. If an unlocked or specially prepared version is ordered, the preparation service usually requires an additional 1–2 business days.
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
9030933411KC 391122B200 – ECU engine controller for Hyundai
The Hyundai engine control unit with part numbers 391122B200 and 9030933411KC has been carefully tested and prepared for installation, ensuring high quality and reliable vehicle operation.
Frequently asked questions – Hyundai engine ECU 391122B200 9030933411KC
Does the Hyundai 391122B200 engine ECU fit only one car model?
The ECU with part number 391122B200 is used in selected Hyundai models, but before purchase it is always necessary to compare all markings on the label. Matching the manufacturer numbers helps choose the correct unit and avoid installation problems.
What does the marking 9030933411KC on the ECU refer to?
The number 9030933411KC is one of the identifiers used when selecting the correct engine ECU. Comparing this marking with the unit installed in the vehicle increases the certainty of choosing the right ECU module.
How can I check the compatibility of the 391122B200 9030933411KC ECU before ordering?
The best solution is to compare all numbers on the current ECU with the part offered. If there are any doubts about the markings 391122B200 or 9030933411KC, it is worth contacting us before purchase – we will help verify compatibility.
Is the offered engine ECU tested before shipping?
Yes. Every ECU undergoes a technical inspection before it is prepared for shipping. We verify its condition and correct operation, so the customer receives a part ready for further installation according to the selected offer version.
Why search for an ECU by the numbers 391122B200 and 9030933411KC?
Part numbers are the most accurate way to identify an engine ECU. Searching by the markings 391122B200 and 9030933411KC makes it easier to find the correct module, reduces the risk of buying the wrong part and helps match it to a specific vehicle.