A properly functioning ABS system is the foundation of road safety. Its main task is to prevent wheel lock-up during emergency braking, which allows the driver to maintain full control of the vehicle. The heart of this system is the electronic ABS pump controller. When it fails, the system stops working. A proper diagnosis of the problem allows you to avoid unnecessary costs and quickly restore brake efficiency.
Ecu Engine Controller HYUNDAI 39140-2A011 391402A011 0281019646
Vendors's code:
Product code: 2787-94166
Barcode:
Code 39:
ISBN:
€325.20
Price
€325.20
Regular price:
€325.20
0%
€400.00
Price
€400.00
Regular price:
€400.00
0%
In stock
Select a product option:
Individual variants may differ in price
product option
Important: Depending on the ECU type and vehicle model, not all of the options listed below may be available.
To select the correct option for your vehicle and ECU, please contact us before purchasing:
contact@auto24parts.com
1. Locked
This option is intended for professional workshops with the required specialist equipment and technical knowledge.
The ECU has been removed from a vehicle intended for recycling and still contains the immobilizer data and other information from the previous vehicle. Before it can be used in another car, it must be unlocked and then programmed using specialist automotive diagnostic equipment.
2. Unlocked
Several preparation methods may be available. The possible options depend on the ECU type, vehicle model and immobilizer system. Please contact us before purchasing, as some preparation methods are not available for every ECU.
Our electronics specialists can prepare the ECU in one of the following ways:
a) ECU with PIN code (Car Pass)
The PIN code is supplied, but programming with a suitable diagnostic tool is still required. After installing the ECU, it must be reset using the supplied PIN code and then programmed to the vehicle’s immobilizer system.
b) VIRGIN ECU
The data from the previous vehicle is removed and the ECU is restored to a clean, factory-like state. After installation, it must be programmed to the vehicle using a compatible specialist diagnostic tool. Unless another preparation method is specified in the product description, this is the standard unlocking option for most of our ECUs.
c) Plug & Play – IMMO OFF
The immobilizer function is disabled in the ECU. After installation, the engine can start without additional immobilizer programming. Please note that the vehicle will no longer have an active immobilizer function, and an immobilizer warning light or fault code may remain, depending on the vehicle model.
d) Plug & Play – Automatic Programming
After installation, the ECU automatically learns and saves the required vehicle data. No additional programming is normally required.
e) Plug & Play – 1:1 Clone
The data from your original ECU is copied to another fully functional ECU. The cloned unit is then ready for installation without additional programming.
You must send us your original ECU so that we can transfer its data to the replacement unit.
The original ECU must have working communication with the vehicle, a diagnostic tool or our programming equipment. If the required data cannot be read, a complete 1:1 clone may not be possible.
3. Complete Plug & Play Set
A complete matched set containing the ECU, immobilizer components and all other parts required to start the vehicle without additional programming. All components supplied in the set must be installed in the vehicle.
Important:
Dispatch time depends on the selected option. If an unlocked or specially prepared version is ordered, the preparation service usually requires an additional 1–2 business days.
Ask about the product
Ecu Engine Controller HYUNDAI 39140-2A011 391402A011 0281019646
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
€30.00
-
shipping
(Poland)
from
€30.00
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Hyundai ECU Engine Controller 39140-2A011 / 391402A011 / 0281019646
The ECU engine controller 39140-2A011, 391402A011 and 0281019646 is a reliable solution that ensures proper engine operation in your Hyundai.
What is the Ecu engine controller Hyundai 39140-2A011 / 391402A011 / 0281019646?
The Ecu engine controller with numbers 39140-2A011, 391402A011 and 0281019646 is an electronic module responsible for the proper operation of the engine in Hyundai vehicles. It controls injection, ignition and many parameters that keep the car running smoothly and efficiently.
Which Hyundai models use the controller 39140-2A011 / 391402A011 / 0281019646?
This type of controller appears in selected Hyundai models with diesel engines. To be 100% sure, compare the number with your current unit or send us your VIN — we will confirm compatibility.
How do I know it's the right Ecu engine controller for my Hyundai?
The most important thing is the number — it must match 39140-2A011, 391402A011 or 0281019646. If the numbers match, the part will work correctly. You can also send a photo of your old controller.
How should I enter the controller number to find the correct product?
Type any of the three numbers: 39140-2A011, 391402A011 or 0281019646. Try versions without dashes or with spaces — search engines often interpret them differently.
Does the controller 39140-2A011 / 391402A011 / 0281019646 need programming?
In most cases yes — it needs adaptation to the vehicle, often called programming or cloning. If you have questions, feel free to contact us.
How long is the delivery time for the Ecu engine controller 39140-2A011 / 391402A011 / 0281019646?
Standard shipping takes 24–48 hours if the part is in stock. The product page always shows the current fulfillment time.
What warranty applies to this Hyundai engine controller?
The controller with numbers 39140-2A011 / 391402A011 / 0281019646 includes a seller or manufacturer warranty. If anything goes wrong, simply submit a claim with the part number.
What if the controller 39140-2A011 / 391402A011 / 0281019646 doesn’t fit?
If the part doesn’t fit, contact us — give the controller number and your car model. We will help you find the correct one or suggest alternatives.
