Skip to main content
English zł
English zł
Open search engine
Search
Close search engine Clear Search
Open search engine
Search
Close search engine Clear Search
English zł
English zł
Products in the cart: 0. See details
Open search engine
Search
Close search engine Clear Search

Intake manifold Opel Astra Meriva Corsa 1.3 CDTI 55207035

  • Part Type Intake manifold
  • Vehicle Make and Model Opel Astra Meriva Corsa
  • Engine Type 1.3 CDTI
  • OEM Part Number 55207035
  • Warranty 6-month warranty
  • Condition Used, working, in good condition
GM
with VAT without VAT
Price 100,00 zł
Availability:
In stock
pcs.

Fast Delivery

DHL Express - 30 euro

6 Month Warranty

Returns Possible up to 14 days

Secure payments

Stripe - Paypal - Credit Card
Ask about the product
Shipping from 120,00 zł - shipping (Poland)

Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price


PRODUCT DETAILS

  • Part Type Intake manifold
  • Vehicle Make and Model Opel Astra Meriva Corsa
  • Engine Type 1.3 CDTI
  • OEM Part Number 55207035
  • Warranty 6-month warranty
  • Condition Used, working, in good condition

Does the intake manifold 55207035 fit your car?

This is an intake manifold with the number 55207035 for Opel Astra Meriva Corsa 1.3 CDTI. The part is used, working and in good condition. Before ordering, compare the number with the one on your part.

Go to full description

Intake manifold Opel Astra Meriva Corsa 1.3 CDTI 55207035

This page describes one specific item: an intake manifold, number 55207035, for Opel Astra Meriva Corsa 1.3 CDTI. The part is used, working and in good condition. Shipping or personal collection is available. The offer includes a 6-month warranty.

Markings to compare

  • 55207035 – OEM number

Which cars it fits

  • make and model: Opel Astra Meriva Corsa
  • engine: 1.3 CDTI

If your engine has a different code from the one above, ask us before ordering.

How this part works

Many engines have swirl flaps or variable-length runner flaps in the manifold, moved by an actuator.

Possible fault symptoms

It is worth checking the part when:

  • the engine idles unevenly,
  • the ECU stores a lean mixture fault,
  • the flaps in the manifold stick or have play.

Fitting – what to watch out for

Tighten the bolts evenly in a cross pattern to the torque given by the manufacturer. Use new gaskets between the manifold and the cylinder head.

Questions and answers

What warranty does the part have?
We give a 6-month warranty on this part.
Does the intake manifold come with sensors and the throttle body?
We sell exactly what you see in the listing photos. Sensors, the throttle body or actuators are included only if they are shown in the photos or named in the title.
How can I receive my order?
Shipping or personal collection is available.

Order online or write to contact@auto24parts.com if you want to confirm the fit.

  • How to Check the Operation of a Transmission Control Module - Symptoms

    A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.

    Read more
  • Burned Engine Control Unit: Symptoms, Causes, and the Optimal Solution

    A burned engine control unit (ECU) usually causes a sudden no-start: the engine cranks but will not start, the diagnostic tool cannot connect to the ECU, and the engine management light does not come on when you switch on the ignition. The most common causes are a voltage spike when jump-starting, reversed battery polarity, a faulty voltage regulator and a short circuit in the wiring loom or in an actuator. Below we explain how to tell a burned ECU from a power supply fault, what causes this kind of failure and how to choose a replacement ECU.

    Read more
  • Flooded Automatic Transmission Control Module or Burnt TCM - Symptoms

    A burnt-out or flooded automatic transmission control module (TCM) usually causes sudden symptoms: limp mode with the gearbox stuck in one gear, harsh thumps when you select D or R, no response to the gear selector, flashing or blank PRND letters and no communication between the diagnostic tool and the gearbox control unit. Flooding is most often caused by blocked scuttle panel drains, washing the engine bay or coolant in the gearbox oil, and a burnout by overheating, a short circuit or a voltage spike. Below we explain the symptoms, what to do straight away and why drying out or repairing such a control unit rarely gives a lasting result.

    Read more
  • Water-damaged ABS pump control module or a burnt-out one - what next?

    A water-damaged or burnt-out ABS pump control module most often lights up the dashboard like a 'Christmas tree' (ABS, ESP and the red brake warning light), leaves the diagnostic tool unable to communicate with the ABS module, makes the pump motor run non-stop or stops the speedometer working. Water usually gets into the module when the scuttle panel drains are blocked, after the engine bay has been cleaned with a pressure washer or after driving through a deep puddle, while a burnout is most often caused by a short circuit or a voltage spike. Below we describe the symptoms, what to do straight away and why drying or repairing such a module rarely gives lasting results.

    Read more
  • Flooded engine control unit - symptoms, consequences and what to do

    A flooded engine control unit (ECU) most often causes a no-start, a 'Christmas tree' of warning lights on the dashboard, no communication with the diagnostic tool, or rough running in limp mode. Water usually gets into the ECU from blocked scuttle drains, after the engine bay has been cleaned with a pressure washer, or after driving through deep water. Below we describe the symptoms of a water-damaged ECU, what to do straight after the ECU gets wet, and why drying or repairing it rarely gives lasting results.

    Read more
  • How to test an ABS module and pump - failure symptoms and checks

    The most common symptom of a faulty ABS pump or ABS module is an ABS warning light that stays on after the engine starts, often together with the ESP light. The brakes still work, but without ABS the wheels can lock under hard braking. To test an ABS module, start by reading the fault codes with a diagnostic tool that can talk to the ABS unit, then check the power supply, the earth and the wheel speed sensors. Only when all of these are fine is the module itself usually to blame.

    Read more