Skip to main content
English zł
English zł
Open search engine
Search
Close search engine Clear Search
Open search engine
Search
Close search engine Clear Search
English zł
English zł
Products in the cart: 0. See details
Open search engine
Search
Close search engine Clear Search

Petrol fuel rail Opel Astra Meriva Tigra Vectra Signum Zafira 1.6 Z16XER 25380933

  • Part Type Petrol fuel rail
  • Vehicle Make and Model Opel Astra Meriva Tigra Vectra Signum Zafira
  • Engine Type 1.6 Z16XER
  • Manufacturer Delphi
  • Manufacturer Part Number 25380933
  • Warranty 6-month warranty
  • Condition Used, working, in good condition
Delphi
with VAT without VAT
Price 320,00 zł
Availability:
product-availability-module In stock
pcs.

Fast Delivery

DHL Express - 30 euro

6 Month Warranty

Returns Possible up to 14 days

Secure payments

Stripe - Paypal - Credit Card
Ask about the product
Shipping from 120,00 zł - shipping (Poland)

Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price


PRODUCT DETAILS

  • Part Type Petrol fuel rail
  • Vehicle Make and Model Opel Astra Meriva Tigra Vectra Signum Zafira
  • Engine Type 1.6 Z16XER
  • Manufacturer Delphi
  • Manufacturer Part Number 25380933
  • Warranty 6-month warranty
  • Condition Used, working, in good condition

Does the petrol fuel rail 25380933 fit your car?

Petrol fuel rail made by Delphi, number 25380933, application: Opel Astra Meriva Tigra Vectra Signum Zafira 1.6 Z16XER. The part is used, working and in good condition. Before you order, check the number on the label of your part.

Go to full description

Petrol fuel rail Opel Astra Meriva Tigra Vectra Signum Zafira 1.6 Z16XER 25380933

The petrol fuel rail 25380933 made by Delphi is a fuel system part used in: Opel Astra Meriva Tigra Vectra Signum Zafira 1.6 Z16XER. The part is used, working and in good condition. You can collect it in person or order it with shipping. The offer comes with a 6-month warranty.

Part identification data

  • 25380933 – manufacturer number
  • manufacturer: Delphi

Which cars it fits

  • make and model: Opel Astra Meriva Tigra Vectra Signum Zafira
  • engine: 1.6 Z16XER

If your engine has a different code, write to us before buying.

How this part works

The fuel rail supplies all injectors with petrol from a single line. The injectors sit in it on seals, so the rail is also responsible for the tightness of the system.

When a replacement may be needed

It is worth checking this part if:

  • the rail body or bracket is cracked,
  • the injector seats are damaged,
  • the engine is hard to start after standing for a while.

Fitting tips

Before removal, release the fuel pressure and disconnect the battery. After fitting, switch the ignition on a few times and check for leaks before starting the engine.

Frequently asked questions

How can I check if the part fits?
Compare the number 25380933 with the label or number on your part, then check the model, engine and year of your car.
Can I ask about fitment before buying?
Yes. Send us the number from your part and your car details (VIN, engine, year) and we will check the fit.
How can I receive my order?
You can collect it in person or order it with shipping.

Not sure about the number? Send a photo of the label to contact@auto24parts.com and we will help you choose.

  • How to Check the Operation of a Transmission Control Module - Symptoms

    A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.

    Read more
  • Burned Engine Control Unit: Symptoms, Causes, and the Optimal Solution

    A burned engine control unit (ECU) usually causes a sudden no-start: the engine cranks but will not start, the diagnostic tool cannot connect to the ECU, and the engine management light does not come on when you switch on the ignition. The most common causes are a voltage spike when jump-starting, reversed battery polarity, a faulty voltage regulator and a short circuit in the wiring loom or in an actuator. Below we explain how to tell a burned ECU from a power supply fault, what causes this kind of failure and how to choose a replacement ECU.

    Read more
  • Flooded Automatic Transmission Control Module or Burnt TCM - Symptoms

    A burnt-out or flooded automatic transmission control module (TCM) usually causes sudden symptoms: limp mode with the gearbox stuck in one gear, harsh thumps when you select D or R, no response to the gear selector, flashing or blank PRND letters and no communication between the diagnostic tool and the gearbox control unit. Flooding is most often caused by blocked scuttle panel drains, washing the engine bay or coolant in the gearbox oil, and a burnout by overheating, a short circuit or a voltage spike. Below we explain the symptoms, what to do straight away and why drying out or repairing such a control unit rarely gives a lasting result.

    Read more
  • Water-damaged ABS pump control module or a burnt-out one - what next?

    A water-damaged or burnt-out ABS pump control module most often lights up the dashboard like a 'Christmas tree' (ABS, ESP and the red brake warning light), leaves the diagnostic tool unable to communicate with the ABS module, makes the pump motor run non-stop or stops the speedometer working. Water usually gets into the module when the scuttle panel drains are blocked, after the engine bay has been cleaned with a pressure washer or after driving through a deep puddle, while a burnout is most often caused by a short circuit or a voltage spike. Below we describe the symptoms, what to do straight away and why drying or repairing such a module rarely gives lasting results.

    Read more
  • Flooded engine control unit - symptoms, consequences and what to do

    A flooded engine control unit (ECU) most often causes a no-start, a 'Christmas tree' of warning lights on the dashboard, no communication with the diagnostic tool, or rough running in limp mode. Water usually gets into the ECU from blocked scuttle drains, after the engine bay has been cleaned with a pressure washer, or after driving through deep water. Below we describe the symptoms of a water-damaged ECU, what to do straight after the ECU gets wet, and why drying or repairing it rarely gives lasting results.

    Read more
  • How to test an ABS module and pump - failure symptoms and checks

    The most common symptom of a faulty ABS pump or ABS module is an ABS warning light that stays on after the engine starts, often together with the ESP light. The brakes still work, but without ABS the wheels can lock under hard braking. To test an ABS module, start by reading the fault codes with a diagnostic tool that can talk to the ABS unit, then check the power supply, the earth and the wheel speed sensors. Only when all of these are fine is the module itself usually to blame.

    Read more