A properly functioning ABS system is the foundation of road safety. Its main task is to prevent wheel lock-up during emergency braking, which allows the driver to maintain full control of the vehicle. The heart of this system is the electronic ABS pump controller. When it fails, the system stops working. A proper diagnosis of the problem allows you to avoid unnecessary costs and quickly restore brake efficiency.
ECU Engine controller PEUGEOT 0281033849 9822917680
Vendors's code: 0281033849
Product code: 7D58-15597
Barcode:
Code 39:
ISBN:
Select a product option:
Individual variants may differ in price
product option
Important: Depending on the ECU type and vehicle model, not all of the options listed below may be available.
To select the correct option for your vehicle and ECU, please contact us before purchasing:
contact@auto24parts.com
1. Locked
This option is intended for professional workshops with the required specialist equipment and technical knowledge.
The ECU has been removed from a vehicle intended for recycling and still contains the immobilizer data and other information from the previous vehicle. Before it can be used in another car, it must be unlocked and then programmed using specialist automotive diagnostic equipment.
2. Unlocked
Several preparation methods may be available. The possible options depend on the ECU type, vehicle model and immobilizer system. Please contact us before purchasing, as some preparation methods are not available for every ECU.
Our electronics specialists can prepare the ECU in one of the following ways:
a) ECU with PIN code (Car Pass)
The PIN code is supplied, but programming with a suitable diagnostic tool is still required. After installing the ECU, it must be reset using the supplied PIN code and then programmed to the vehicle’s immobilizer system.
b) VIRGIN ECU
The data from the previous vehicle is removed and the ECU is restored to a clean, factory-like state. After installation, it must be programmed to the vehicle using a compatible specialist diagnostic tool. Unless another preparation method is specified in the product description, this is the standard unlocking option for most of our ECUs.
c) Plug & Play – IMMO OFF
The immobilizer function is disabled in the ECU. After installation, the engine can start without additional immobilizer programming. Please note that the vehicle will no longer have an active immobilizer function, and an immobilizer warning light or fault code may remain, depending on the vehicle model.
d) Plug & Play – Automatic Programming
After installation, the ECU automatically learns and saves the required vehicle data. No additional programming is normally required.
e) Plug & Play – 1:1 Clone
The data from your original ECU is copied to another fully functional ECU. The cloned unit is then ready for installation without additional programming.
You must send us your original ECU so that we can transfer its data to the replacement unit.
The original ECU must have working communication with the vehicle, a diagnostic tool or our programming equipment. If the required data cannot be read, a complete 1:1 clone may not be possible.
3. Complete Plug & Play Set
A complete matched set containing the ECU, immobilizer components and all other parts required to start the vehicle without additional programming. All components supplied in the set must be installed in the vehicle.
Important:
Dispatch time depends on the selected option. If an unlocked or specially prepared version is ordered, the preparation service usually requires an additional 1–2 business days.
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
ECU ENGINE CONTROLLER Peugeot 9822917680 0281033849
Original Peugeot engine controller, ensuring compatibility with selected vehicle models and stable engine operation.
FAQ – Peugeot Engine ECU 0281033849 / 9822917680
1. What does the number 0281033849 refer to?
The number 0281033849 identifies an engine ECU used in Peugeot vehicles. When selecting the correct part, it is recommended to compare this number with the marking on the original module to avoid ordering the wrong unit.
2. Is the number 9822917680 as important as 0281033849?
Yes, 9822917680 is one of the key references for this part. Peugeot engine ECUs are often listed with both numbers, so it is best to verify compatibility using both the manufacturer reference and the ECU number.
3. How can I check if Peugeot ECU 9822917680 fits my car?
The safest method is to compare the numbers on the housing of the old ECU. If your original part shows 9822917680, 0281033849 or a reference matching the offer description, there is a strong chance of correct compatibility.
4. Does engine ECU 0281033849 require coding?
In many cases, the ECU may require adaptation, programming or data transfer from the previous module. The exact procedure depends on the vehicle, equipment version and immobilizer system.
5. Why is it better to buy an ECU by part number?
Choosing by number, such as 0281033849 or 9822917680, reduces the risk of purchasing an incorrect module. Vehicle model, year or engine size alone may not be enough, as different ECU versions may have been installed in the same model.
6. Can ECU 9822917680 have alternative references?
Some Peugeot engine ECUs may appear under several catalogue or production numbers. For this reason, it is worth checking the full set of markings, including 9822917680 and 0281033849.
7. What should I check before buying Peugeot ECU 0281033849?
Before purchase, check the part numbers, connector condition, housing compatibility and any coding requirements. Correct matching of the Peugeot 0281033849 9822917680 ECU is essential for proper engine operation.