A properly functioning ABS system is the foundation of road safety. Its main task is to prevent wheel lock-up during emergency braking, which allows the driver to maintain full control of the vehicle. The heart of this system is the electronic ABS pump controller. When it fails, the system stops working. A proper diagnosis of the problem allows you to avoid unnecessary costs and quickly restore brake efficiency.
ECU engine controller 2.2 HDI Continental S180129101G 9679182280 – Citroen Peugeot Fiat – Plug & Play
Vendors's code:
Product code: 1A7F-391FE
Barcode:
Code 39:
ISBN:
€772.36
Price
€772.36
Regular price:
€772.36
0%
€950.00
Price
€950.00
Regular price:
€950.00
0%
Select a product option:
Individual variants may differ in price
product option
Important: Depending on the ECU type and vehicle model, not all of the options listed below may be available.
To select the correct option for your vehicle and ECU, please contact us before purchasing:
contact@auto24parts.com
1. Locked
This option is intended for professional workshops with the required specialist equipment and technical knowledge.
The ECU has been removed from a vehicle intended for recycling and still contains the immobilizer data and other information from the previous vehicle. Before it can be used in another car, it must be unlocked and then programmed using specialist automotive diagnostic equipment.
2. Unlocked
Several preparation methods may be available. The possible options depend on the ECU type, vehicle model and immobilizer system. Please contact us before purchasing, as some preparation methods are not available for every ECU.
Our electronics specialists can prepare the ECU in one of the following ways:
a) ECU with PIN code (Car Pass)
The PIN code is supplied, but programming with a suitable diagnostic tool is still required. After installing the ECU, it must be reset using the supplied PIN code and then programmed to the vehicle’s immobilizer system.
b) VIRGIN ECU
The data from the previous vehicle is removed and the ECU is restored to a clean, factory-like state. After installation, it must be programmed to the vehicle using a compatible specialist diagnostic tool. Unless another preparation method is specified in the product description, this is the standard unlocking option for most of our ECUs.
c) Plug & Play – IMMO OFF
The immobilizer function is disabled in the ECU. After installation, the engine can start without additional immobilizer programming. Please note that the vehicle will no longer have an active immobilizer function, and an immobilizer warning light or fault code may remain, depending on the vehicle model.
d) Plug & Play – Automatic Programming
After installation, the ECU automatically learns and saves the required vehicle data. No additional programming is normally required.
e) Plug & Play – 1:1 Clone
The data from your original ECU is copied to another fully functional ECU. The cloned unit is then ready for installation without additional programming.
You must send us your original ECU so that we can transfer its data to the replacement unit.
The original ECU must have working communication with the vehicle, a diagnostic tool or our programming equipment. If the required data cannot be read, a complete 1:1 clone may not be possible.
3. Complete Plug & Play Set
A complete matched set containing the ECU, immobilizer components and all other parts required to start the vehicle without additional programming. All components supplied in the set must be installed in the vehicle.
Important:
Dispatch time depends on the selected option. If an unlocked or specially prepared version is ordered, the preparation service usually requires an additional 1–2 business days.
Ask about the product
ECU engine controller 2.2 HDI Continental S180129101G 9679182280 – Citroen Peugeot Fiat – Plug & Play
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
€30.00
-
shipping
(Poland)
from
€30.00
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Engine control unit 2.2 HDI Continental S180129101G 9679182280 – Citroen Peugeot Fiat
Refurbished 2.2 HDI Continental engine control unit (S180129101G, 9679182280) for Citroen, Peugeot and Fiat vehicles – prepared in Plug & Play version, ready for installation without additional programming.
FAQ – Engine control unit S180129101G / 9679182280 2.2 HDI Continental
Does the S180129101G engine controller fit every 2.2 HDI?
The S180129101G model is used in selected 2.2 HDI versions in Citroen, Peugeot and Fiat vehicles. Matching by VIN or confirming compatibility of number 9679182280 with the original module installed in the vehicle is essential.
What does Plug & Play version mean for 9679182280?
The 9679182280 controller is individually prepared according to vehicle data, so after installation it does not require adaptation or coding. The unit is ready to operate immediately after connection.
Does Continental S180129101G require immobiliser programming?
No. The offered Continental S180129101G controller is supplied in a configuration allowing direct installation without immobiliser synchronisation.
How can I check if 9679182280 is correct for my vehicle?
The safest method is to compare the number on the old controller label or send the VIN number to verify software compatibility.
What is the difference between a refurbished and a used 2.2 HDI controller?
A refurbished S180129101G unit undergoes functional testing, electronics inspection and configuration for a specific vehicle. It is a safer solution than a standard used part without verification.
Can Continental S180129101G replace other numbers?
In some 2.2 HDI versions the S180129101G replaces older software revisions. Always check number 9679182280 or consult before purchase.
What symptoms indicate failure of controller 9679182280?
Typical symptoms include lack of diagnostic communication, unstable engine operation, starting problems or errors not related to hardware faults.
Is the Continental 2.2 HDI controller covered by warranty?
Yes, every refurbished Continental S180129101G / 9679182280 controller is covered by warranty according to the offer conditions.
