A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
Seat belt pretensioner Opel Vectra B, left front 90462783, L9602092305
Vendors's code: 90462783
Product code: 90462783
Barcode:
Code 39:
ISBN:
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
How can you check whether the seat belt pretensioner 90462783 will fit?
Seat belt pretensioner, number 90462783, application: Opel Vectra B. This is a used part. The safest way to match it is by the number on the label or housing.
Seat belt pretensioner Opel Vectra B, left front 90462783, L9602092305
We offer a seat belt pretensioner with the number 90462783. According to the listing data it fits Opel Vectra B. This is a used part. Shipping or personal collection is available.
Identification data
- 90462783 – OEM number
- L9602092305 – OEM number
- side and position: left front
Vehicle fitment
- make and model: Opel Vectra B
One car model may have used different versions of this part, so the number matters most.
What it does
The airbag control unit constantly checks the pretensioner circuit and, if there is a fault, lights the airbag warning light and stores a fault code.
When to check this part
These symptoms may point to a fault:
- the airbag light is on and the diagnosis points to the pretensioner circuit,
- the belt does not retract or locks for no reason,
- the pretensioner connector or wiring is damaged.
Before fitting
Compare the number, side and position of the pretensioner with the part removed from the car. Fitting pyrotechnic parts is best left to a workshop that knows the airbag system procedures.
Frequently asked questions
| How can I check if the part fits my car? |
|---|
| Compare the number 90462783 with the one on your part, then check the car model and the side and position of the pretensioner. |
| Do I need to clear the airbag fault after replacing the pretensioner? |
| Yes. After fitting, clear the fault codes in the airbag control unit with a diagnostic tester and check that the warning light goes out a few seconds after you switch on the ignition. |
| How can I receive my order? |
| Shipping or personal collection is available. |
Looking for another part? Browse the Seat belt pretensioners category or write to contact@auto24parts.com.