A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
Seat belt pretensioner Opel Vectra C, right rear 24463290F, 9022730897
Vendors's code: 24463290F
Product code: 24463290F
Barcode:
Code 39:
ISBN:
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Seat belt pretensioner 24463290F – how to confirm the fit?
This is a seat belt pretensioner with the number 24463290F for Opel Vectra C. This is a used part. Before ordering, compare the number with the one on your part.
Seat belt pretensioner Opel Vectra C, right rear 24463290F, 9022730897
This page describes one specific item: a seat belt pretensioner, number 24463290F, for Opel Vectra C. This is a used part. Shipping or personal collection is available.
Markings to compare
- 24463290F – OEM number
- 9022730897 – OEM number
- side and position: right rear
How this part works
Left and right, front and rear pretensioners are separate parts, so the side, position and number all matter when buying.
Vehicle fitment
- make and model: Opel Vectra C
The pretensioner must match by side and position (front or rear), so check these together with the number.
Possible fault symptoms
These symptoms may point to a fault:
- the pretensioner fired in a collision,
- the airbag light is on and the diagnosis points to the pretensioner circuit,
- the pretensioner connector or wiring is damaged.
Replacement tips
Before starting, switch off the ignition, disconnect the battery and wait for the time given by the car maker. Compare the number, side and position of the pretensioner with the part removed from the car.
Frequently asked questions
| How can I check if the part fits my car? |
|---|
| Compare the number 24463290F with the one on your part, then check the car model and the side and position of the pretensioner. |
| Can I ask about the fit before ordering? |
| Yes. Send us the number of your part and your car details (VIN, engine code, year) and we will check the fit. |
| Do I need to clear the airbag fault after replacing the pretensioner? |
| Yes. After fitting, clear the fault codes in the airbag control unit with a diagnostic tester and check that the warning light goes out a few seconds after you switch on the ignition. |
Send questions about this part to contact@auto24parts.com with the part number and your car details.