The engine control unit (often referred to as ECU or ECM) is the most important electronic module in every modern vehicle. It acts as the main computer managing the operation of the power unit, analyzing signals from numerous sensors in real-time. It is responsible for precise fuel dosing, ignition timing, boost pressure, and the operation of exhaust gas treatment systems. When this crucial component fails, normal operation of the car becomes impossible. When faced with electronic problems, many drivers consider complicated diagnostics, circuit testing, and attempting to repair integrated circuits. In practice, the fastest, safest, and most cost-effective solution is to replace the damaged component with a fully functional, original used part from the aftermarket.
ECU Engine Controller SSANGYONG KYRON A6645408032 R0411C044A 28036682
Vendors's code: A6645408032
Product code: R0411C044A
Barcode:
Code 39:
ISBN:
€243.90
Price
€243.90
Regular price:
€243.90
0%
€300.00
Price
€300.00
Regular price:
€300.00
0%
In stock
Select a product option:
Individual variants may differ in price
product option
Important: Depending on the ECU type and vehicle model, not all of the options listed below may be available.
To select the correct option for your vehicle and ECU, please contact us before purchasing:
contact@auto24parts.com
1. Locked
This option is intended for professional workshops with the required specialist equipment and technical knowledge.
The ECU has been removed from a vehicle intended for recycling and still contains the immobilizer data and other information from the previous vehicle. Before it can be used in another car, it must be unlocked and then programmed using specialist automotive diagnostic equipment.
2. Unlocked
Several preparation methods may be available. The possible options depend on the ECU type, vehicle model and immobilizer system. Please contact us before purchasing, as some preparation methods are not available for every ECU.
Our electronics specialists can prepare the ECU in one of the following ways:
a) ECU with PIN code (Car Pass)
The PIN code is supplied, but programming with a suitable diagnostic tool is still required. After installing the ECU, it must be reset using the supplied PIN code and then programmed to the vehicle’s immobilizer system.
b) VIRGIN ECU
The data from the previous vehicle is removed and the ECU is restored to a clean, factory-like state. After installation, it must be programmed to the vehicle using a compatible specialist diagnostic tool. Unless another preparation method is specified in the product description, this is the standard unlocking option for most of our ECUs.
c) Plug & Play – IMMO OFF
The immobilizer function is disabled in the ECU. After installation, the engine can start without additional immobilizer programming. Please note that the vehicle will no longer have an active immobilizer function, and an immobilizer warning light or fault code may remain, depending on the vehicle model.
d) Plug & Play – Automatic Programming
After installation, the ECU automatically learns and saves the required vehicle data. No additional programming is normally required.
e) Plug & Play – 1:1 Clone
The data from your original ECU is copied to another fully functional ECU. The cloned unit is then ready for installation without additional programming.
You must send us your original ECU so that we can transfer its data to the replacement unit.
The original ECU must have working communication with the vehicle, a diagnostic tool or our programming equipment. If the required data cannot be read, a complete 1:1 clone may not be possible.
3. Complete Plug & Play Set
A complete matched set containing the ECU, immobilizer components and all other parts required to start the vehicle without additional programming. All components supplied in the set must be installed in the vehicle.
Important:
Dispatch time depends on the selected option. If an unlocked or specially prepared version is ordered, the preparation service usually requires an additional 1–2 business days.
Ask about the product
ECU Engine Controller SSANGYONG KYRON A6645408032 R0411C044A 28036682
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
€30.00
-
shipping
(Poland)
from
€30.00
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
SsangYong Kyron ECU Engine Controller A6645408032 / R0411C044A / 28036682
The ECU engine controller A6645408032, R0411C044A and 28036682 is a proven part that ensures proper and stable engine operation in the SsangYong Kyron.
What role does the A6645408032 Ecu engine controller play in the SsangYong Kyron?
The Ecu engine controller identified by the numbers A6645408032 and R0411C044A controls the operation of the power unit in the SsangYong Kyron. It manages fuel injection, cooperation with sensors and engine response to varying load conditions, which is especially important in utility and off-road vehicles.
In which versions of the Kyron is this Ecu engine controller used?
This Ecu engine controller was used in selected versions of the SsangYong Kyron, mainly with diesel engines. Exact compatibility depends on production year and engine version, therefore ECU number or VIN verification is recommended.
How can I confirm that the 28036682 Ecu engine controller fits my vehicle?
The best method is to check the markings on the installed unit. If the numbers A6645408032, R0411C044A or 28036682 are present, the Ecu engine controller is compatible. You may also send us a photo for verification.
Why does this Ecu engine controller have multiple part numbers?
Different numbers such as A6645408032, R0411C044A or 28036682 come from vehicle manufacturer and electronics supplier numbering systems. They all refer to the same Ecu engine controller, not different technical versions.
Customers Also Viewed
-
Price €300.00Price €243.90
