A properly functioning ABS system is the foundation of road safety. Its main task is to prevent wheel lock-up during emergency braking, which allows the driver to maintain full control of the vehicle. The heart of this system is the electronic ABS pump controller. When it fails, the system stops working. A proper diagnosis of the problem allows you to avoid unnecessary costs and quickly restore brake efficiency.
Throttle Body Alfa Romeo MiTo Magneti Marelli 48CPD6 55200820
Vendors's code: 48CPD6
Product code: 55200820
Barcode:
Code 39:
ISBN:
€121.95
Price
€121.95
€150.00
Price
€150.00
Ask about the product
Throttle Body Alfa Romeo MiTo Magneti Marelli 48CPD6 55200820
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
€30.00
-
shipping
(Poland)
from
€30.00
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Does the Magneti Marelli 48CPD6 throttle body fit your car?
This is a used, working Magneti Marelli throttle body with part numbers 48CPD6 and 55200820, for: Alfa Romeo MiTo (engines: 2.0 JTDM), 2006–2014. Before ordering, compare the number with the label on the throttle body fitted to your car.
Throttle Body Magneti Marelli 48CPD6 55200820 – Alfa Romeo MiTo
The 48CPD6 throttle body works in a diesel engine: it shuts off the air supply when the engine is stopped to limit shaking, and in many engines it also assists EGR control. According to the product data, it fits: Alfa Romeo MiTo; engines: 2.0 JTDM; production years: 2006–2014.
Choosing by part number
- 48CPD6
- 55200820
Check whether the throttle body in your car carries the number 48CPD6 or 55200820. Knowing only the model (Alfa Romeo MiTo) is not enough to choose the part: different throttle body versions were used in the same cars.
Common throttle body faults
Typical symptoms of throttle body problems in Alfa Romeo cars:
- soot from the EGR system on the flap – sticking flap, fault codes stored in the engine control unit,
- failed motor or position sensor – engine warning light, limp mode,
- flap not closing fully – the engine may shake when switched off.
If cleaning does not help and diagnostics point to a throttle body or position sensor fault, replacement with a part carrying the same number is usually required. After fitting, many cars need an adaptation according to the vehicle manufacturer's procedure.
Questions and answers
| How do I check that the 48CPD6 throttle body fits my car? |
|---|
| Compare the number 48CPD6 or 55200820 with the label of the throttle body fitted to your car (Alfa Romeo MiTo). |
| Which engines does the 48CPD6 throttle body fit? |
| According to the product data, it fits 2.0 JTDM engines in: Alfa Romeo MiTo, 2006–2014. |
| Does the throttle body need to be adapted (relearned) after replacement? |
| In many cars, yes: after fitting, the engine control unit learns the end positions of the throttle. This is done with a diagnostic tool or by following the procedure described by the car manufacturer. |
| What condition is this throttle body in? |
| It is a used part in good working condition. The warranty period is shown in the product specification table. |
Not sure if this throttle body fits your car? Send us the number from the label on your part and we will check compatibility before shipping.
