A properly functioning ABS system is the foundation of road safety. Its main task is to prevent wheel lock-up during emergency braking, which allows the driver to maintain full control of the vehicle. The heart of this system is the electronic ABS pump controller. When it fails, the system stops working. A proper diagnosis of the problem allows you to avoid unnecessary costs and quickly restore brake efficiency.
Throttle Body Alfa Romeo Fiat Magneti Marelli 48CPD6 55229467
Vendors's code: 55229467
Product code: 48CPD6
Barcode:
Code 39:
ISBN:
325,20 zł
Price
325,20 zł
400,00 zł
Price
400,00 zł
Ask about the product
Throttle Body Alfa Romeo Fiat Magneti Marelli 48CPD6 55229467
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
120,00 zł
-
shipping
(Poland)
from
120,00 zł
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
How can you check whether the 48CPD6 throttle body fits your car?
This is a used, working Magneti Marelli throttle body with part numbers 48CPD6 and 55229467, for: Alfa Romeo, Fiat (engines: 2.0 JTDM), 2008–2012. To confirm the fit, compare the number with the label on the throttle body in your car.
Throttle Body Magneti Marelli 48CPD6 55229467 – Alfa Romeo, Fiat
The 48CPD6 throttle body works in a diesel engine: it shuts off the air supply when the engine is stopped to limit shaking, and in many engines it also assists EGR control. According to the product data, it fits: Alfa Romeo, Fiat; engines: 2.0 JTDM; production years: 2008–2012.
Choosing by part number
- 48CPD6
- 55229467
The label on the throttle body fitted to your car should show the number 48CPD6 or 55229467. Knowing only the make of the car (Alfa Romeo, Fiat) is not enough: different throttle body versions were used.
Symptoms of a worn or faulty throttle body
When the throttle body in a Alfa Romeo or Fiat starts to fail, the most common signs are:
- soot from the EGR system on the flap – sticking flap, fault codes stored in the engine control unit,
- failed motor or position sensor – engine warning light, limp mode,
- flap not closing fully – the engine may shake when switched off.
If cleaning does not help and diagnostics point to a throttle body or position sensor fault, replacement with a part carrying the same number is usually required. After fitting, many cars need an adaptation according to the vehicle manufacturer's procedure.
Frequently asked questions
| How do I check that the 48CPD6 throttle body fits my car? |
|---|
| Compare the number 48CPD6 or 55229467 with the label of the throttle body fitted to your car (Alfa Romeo, Fiat). |
| Which engines does the 48CPD6 throttle body fit? |
| According to the product data, it fits 2.0 JTDM engines in: Alfa Romeo, Fiat, 2008–2012. |
| Does the throttle body need to be adapted (relearned) after replacement? |
| In many cars, yes – the engine control unit has to learn the positions of the new throttle body. This is done with a diagnostic tool or according to the vehicle manufacturer's procedure. |
| What condition is this throttle body in? |
| It is a used part in good working condition. The warranty period is shown in the product specification table. |
Unsure about compatibility? Send us the number from your throttle body label and we will check whether this part fits.
